Peugeot iOn 2012 Owner's Manual - RHD (UK, Australia)

8
Practical information
99








Changing a bulb
1.Direction indicators(W21W - 21 W).2.Sidelamps (W5W - 5 W).3.Main beam headlamps (HB3 - 60 W).4.Dipped beam headlamps (H11 - 55 W).

The headlamps are fitted with polycarbonate glass with a protectivecoating:Fdo not clean them using a dry or abrasive cloth, nor with a detergent or solvent product,F
use a sponge and soapy water, F
when using a high pressure washer on persistent marks, do not keep the lance directed towards thelamps or their edges for too long, so as not to damage their protectivecoating and seals,F
do not touch the bulb directly withyour fingers, use lint-free cloths.

Changing a bulb should only be done after the headlamp has been switchedoff for a few minutes (risk of serious burns).
It is imperative to use only anti-ultraviolet (UV) type bulbs in order not
to damage the headlamp. Always replace a failed bulb with anew bulb with the same type andspecification.
Front lamps
5. Front foglamps
(H8 - 35 W).6.Daytime running lamps (P13W - 13 W).

Practical information
100
F Lift the cover B
, using a screwdriver
protected by a cloth.F Slacken fixing screw C
until the head of the screw touches the trim.
FRemove the bumper retaining clips, using ascrewdriver. FCarefully lift the bumper. To replace a failed bulb,
you must first remove
the lamp. To remove the lamp:FOpen the bonnet. FPress tab A to release the connector.
Access to bulbs

8
Practical information
101
Slacken fixing screw D , while holding the
bumper away.FSlacken fixing screw E.
F Pull the lamp towards you, and disengage
the tab Fto remove it completely.

Practical information
102
Changing sidelamp bulbs
F Turn the bulb holder to the left and pull it out. F
Pull the bulb out and and change it.
To reassemble, carry out these operations in reverse order.
Changing main beam headlampbulbs
FTurn the bulb holder to the left and pull it out.FRemove the bulb by pressing on the
tongue.FChange the bulb.
For reassembly, carry out these operations in
reverse order.

Changing direction indicator
bulbs
FTurn the bulb holder to the left and pull itout.FPull the bulb out and change it.
To r e f i t , c a r ry out these operations in reverse order.
Amber coloured bulbs must be replaced with bulbs of identical specifications and colour.

8
Practical information
103
Changing dipped beam headlamp bulbs
FTurn the bulb holder to the left and pull it out. FRemove the bulb by pressing on the
tongue.FChange the bulb.
To r efit, carry out these operations in reverse order.
Changing front foglamp bulbs / daytime running lamp bulbs
F Put the front wheels onto full lock, to facilitate access.F
Remove the clips securing the protective covers on the bulb holders.F
Move the cover aside.
F
Turn the bulb holder ( Afor the front fog
lamp, B for the daytime running lamp) to
the left and pull it out.
F Pull the bulb out and change it.
To reassemble, carry out these operations in
reverse order.

Practical information
104
1.Brake lamps / Sidelamps(21 W / 15 W or LEDs).2.Direction indicators(W Y21W - 21 W).3.Reversing lamps (W21W - 21 W).
Rear lamps
Amber coloured bulbs, such as the direction indicators, must be replaced with bulbs of identical specification and colour.
In some weather conditions (e.g. lowtemperature or humidity), the presenceof misting on the internal sur face of the glass of the headlamps and rear lamps is normal; it disappears after the lampshave been on for a few minutes.
Changing integrated directionindicator side repeater bulbs (WY5W - 5 W)
FPush the repeater towards the rear anddisengage it.FTurn the bulb holder to the left and pullit out. FPull the bulb out and change it.
To reassemble, carry out these operations inreverse order.

Access to bulbs
FRemove the two screws. FDisengage the lamp unit by pulling it
towards you.

8
Practical information
105
Changing a direction indicator bulb


Changing brake lamp /
sidelamp LEDs
All work on the LED lamps must be carried out
by a PEUGEOT dealer or qualified workshop.

Changing a reversing lamp bulb
Changing brake lamp / sidelamp
bulbs (21 W / 15 W)
FTurn the bulb holder to the left and pull it out.FPull out the bulb and change it.
To r e f i t , c a r ry out these operations in reverseorder.
F
Turn the bulb holder to the left and pull
it out. F Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverse order.
F Turn the bulb holder to the left and pull
it out.F Pull the bulb out and replace it.
To r e f i t , c a r ry out these operations in reverseorder.

Practical information
106
Changing a foglamp bulb (W21W - 21W)
FRemove the cover.FTurn the bulb holder to the left and pullit out. FPull the bulb out and change it.
To r e f i t , c a r r
y out these operations in reverse order.
Third brake lamp(W5W - 5W)
F Remove the two screws. F
Pull out the bulb-holder. F
Pull out the bulb and change it.
To r efit, carry out these operations in reverse
order.

Changing number plate lamp
bulbs (W5W - 5W)
FPush the cover inwards.FTurn the bulb holder and pull it out.FRemove the bulb and change it.
To r efit, carry out these operations in reverse order.

8
Practical information
107











Changing a fuse
the fusebox cover in the dashboard (right hand side).
For access: FUnclip the cover and remove it completely by pulling it towards you.FRemove the tweezer.



Access to tools
Before changing a fuse, the cause of thefailure must be identified and rectified. F
Check that the ignition switch is in
the "LOCK " position.F
Identify the failed fuse by checking
the condition of its filament.
Changing a fuse
Good Failed
F
Use the special tweezer to extract thefuse from its location. F
Always replace the failed fuse with a fuse
of the same rating. F Check that the number marked on the box,
the rating marked on the top of the fuse
and the tables below all agree.

PEUGEOT will not accept responsibilityfor the cost incurred in repairing your vehicle or for rectifying the malfunctionsresulting from the installation of accessories not supplied and not recommended by PEUGEOT andnot installed in accordance with itsinstructions, in par ticular when the consumption of all of the additional equipment connected exceeds 10 milliamperes.

Your vehicle's electrical system isdesigned to operate with standard or optional equipment.
Before installing other electrical equipment or accessories in your vehicle, contact a PEUGEOT dealer or a qualified workshop.

Practical information
108
Dashboard fuses
The fusebox is placed in the lower dashboard (right-hand side).
Fuse N°RatingFunctions
17. 5 A
Left hand front and rear sidelamps.
215 A Accessory socket.
3-
Not used.
47. 5 A Starter.
520
A Audio system.
6
- Not used.
77. 5 A
Vehicle equipment, right hand front and rear sidelamps.
87.5 A
Electric door mirrors.
97. 5 A
Supervisor controller.
107. 5 A Air conditioning.
1110 A
Rear foglamp.
12 15 A
Door lockin
g.
13 10 A
Courtesy lamp.