Peugeot RCZ 2011 - RHD (UK, Australia) Service Manual

1/
offmph
mi.
l/100
55
500
10,2
12
mph
miles
l/100
55
500 LIMIT Pause
10,2
INSTRUMENTS AND CONTROLS

DATA DISPLAYS



)
Press the button, located at the end of the wiper stalk
, to display
the various trip computer tabs in succession.



)
Press the up and down arrows on the navigator for the instrument
panel with large central screen to display the various trip computer
tabs in succession.



With the large central screen











Instrument panel with small central screen

Instrument panel with large central screen

With the small central screen


System that gives you current information on your journey (range, fuel
consumption…).

1
2
40



- The current information tab with:


●
the range,

●
the current fuel consumption.



- The trip "1"
tab with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the fi rst trip.



- The trip "2"
tab with:


●
the distance travelled,

●
the average fuel consumption,

●
the average speed,
for the second trip.



)
Pressing the button again takes you to a black screen.
A further press returns you to the normal display.



TRIP ZERO RESET



)
When the trip required is displayed, press the button at the end of
the wiper stalk
for more than two seconds.



With the large central screen



)
When the required trip is displayed, press the "OK"
button on the
navigator
for the instrument panel with large central screen.



With the small central screen


Trips "1"
and "2"
are independent but their use is identical.
Trip "1"
permits, for example, daily calculations, and trip "2"
monthly
calculations.

1/
INSTRUMENTS AND CONTROLS






A FEW DEFINITIONS…


Range

(miles or km)
This indicates the distance which can still be travelled
with the fuel remaining in the tank in relation to the average fuel
consumption over the last few miles (kilometres) travelled.
This value may vary following a change in the style of driving
or the relief, resulting in a signifi cant change in the current fuel
consumption.
If dashes are displayed continuously while driving in place of the
digits, contact a PEUGEOT dealer or a qualifi ed workshop.
This function is only displayed from 20 mph (30 km/h). When the range falls below 20 miles (30 km), dashes are displayed.
After fi lling with at least 5 litres of fuel, the range is recalculated and is
displayed when it exceeds 60 miles (100 km).

Current fuel consumption

(mpg or l/100 km or km/l)
This is the average fuel consumption during the last few
seconds.

Average fuel consumption

(mpg or l/100 km or km/l)
This is the average fuel consumption since the last trip
computer zero reset.


Average speed

(mph or km/h)
This is the average speed calculated since the last trip
computer zero reset (ignition on).


Distance travelled

(miles or km)
This indicates the distance travelled since the last trip
computer zero reset.

42
MONOCHROME SCREEN C (WITH
PEUGEOT CONNECT SOUND)

DISPLAYS ON THE SCREEN

This displays the following information:


- time,

- date,

- ambient temperature (this fl ashes if there is a risk of ice),

- state of the openings (doors, boot...),

- visual parking sensors.

- audio functions,

- telephone information and directories.
Warning messages (e.g.: "Emission control system faulty") or
information messages (e.g.: "Automatic lighting of headlamps
activated") may appear temporarily. These can be cleared by pressing
the "ESC"
button.


CONTROLS

From the control panel of your Peugeot Connect Sound, you can:


)
press the "MENU"
button for access to the main menu
,

)
press the " 
" or " 
" buttons to scroll through the items on the
screen,

)
press the "MODE"
button to change the permanent application
(audio source, telephone...),

)
press the " 
" or " 
" buttons to change a setting value,

)
press the "OK"
button to confi rm,
or


)
press the "ESC"
button to abandon the operation in progress.

11:32104.6 FM1RTL23Mem1c°
TMC LOUD RDS TATue 21/10/2010

1/
INSTRUMENTS AND CONTROLS

MAIN MENU



)
Press the "MENU"
button to gain access to the main menu
:


- audio functions,

- vehicle diagnostics,

- personalisation-confi guration,

- telephone (Bluetooth system).

)
Press the " 
" or " 
" buttons to select the menu required, then
confi rm by pressing the "OK"
button.



"AUDIO FUNCTIONS" MENU

With the Peugeot Connect Sound switched on, once this menu has
been selected you can activate or deactivate the functions linked with
use of the radio (RDS, REG, RadioText) or the CD (introscan, shuffl e,
CD repeat).
For more information on the "Audio functions" application, refer to the
Peugeot Connect Sound part of the "Audio and Telematics" section.


"DIAGNOSIS VEHICLE" MENU

Once this menu has been selected, you can consult information
concerning the status of the vehicle.

Alert log

This summarises the active warning messages, displaying them in
succession on the multifunction screen.

)
On the " Diagnosis vehicle
" menu, select the following application:



)
Press the "MENU"
button to gain access to the main menu.

)
Press the arrows, then the "OK"
button to select the " Diagnosis
vehicle
" menu.

44

"PERSONALISATION-CONFIGURATION"
MENU
Once this menu has been selected, you can gain access to the
following functions:


- defi ne the vehicle parameters,

- display confi guration,

- choice of language.


Define the vehicle parameters

Once this menu has been selected, you can activate or deactivate the
following equipment:


- selective unlocking (refer to the "Access" section),

- guide-me-home and welcome lighting (refer to the "Visibility" and
"Ergonomics and Comfort" sections),

- interior mood lighting (refer to the "Ergonomics and Comfort" section),

- daytime running lamps (refer to the "Visibility" section),

- rear parking sensors (refer to the "Driving" section).
)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
"Guide-me-home headlamps" line.

)
Press the " 
" or " 
" buttons to set the value required (15, 30 or
60 seconds), then press the "OK"
button to confi rm.

)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
"OK"
box and confi rm or press the "ESC"
button to cancel.
Example: setting of the duration of the guide-me-home lighting


)
Press the " 
" or " 
" buttons, then the "OK"
button to select the
menu required.

1/
INSTRUMENTS AND CONTROLS
With the Peugeot Connect Sound switched on, once this menu has
been selected you can confi gure your Bluetooth hands-free system
(pairing), consult the various telephone directories (calls log, services...)
and manage your communications (pick up, hang up, call waiting,
secret mode...).
For more information on the "Telephone" application, refer to the
Peugeot Connect Sound part of the "Audio and Telematics" section.

"TELEPHONE" MENU


* According to country.


Display configuration

Once this menu has been selected, you have access to the following
settings:


- brightness-video setting,

- date and time setting,

- choice of units.



Choice of language

Once this menu has been selected, you can change the language
used by the display (Deutsch, English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-Brasil, Türkçe * ).

For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.

2ABC3DEF
5JKL4GHI6MNO
8TUV7PQRS9WXYZ
0*#
1
RADIO MEDIANAV ESC TRAFFIC
SETUPADDR
BOOK
46
16/9 HIGH DEFINITION
RETRACTABLE COLOUR SCREEN
(WITH PEUGEOT CONNECT MEDIA)

DISPLAYS IN THE SCREEN

Once unfolded, it displays the following information automatically and
directly:


- time,

- date,

- altitude,

- ambient temperature (the value displayed fl ashes if there is a risk of
ice),

- visual parking sensor information,

- audio functions,

- telephone and address book information,

- satellite navigation system information.
From the Peugeot Connect Media control panel, to select one of the
applications:


)
press the dedicated "RADIO"
, "MEDIA"
, "NAV"
, "TRAFFIC"
,
"ADDR BOOK"
or "SETUP"
button for access to the
corresponding menu,

)
turn dial A
to select a function, an item in a list,

)
press button B
to confi rm the selection,
or

)
press the "ESC"
button to abandon the current operation and
return to the previous display.
For more information on these applications, refer to the Peugeot
Connect Media part of the "Audio and Telematics" section.

CONTROLS

1/
INSTRUMENTS AND CONTROLS
For operation of the retractable screen (opening, closing,
adjustment of the position, etc.), refer to the paragraph "Access to
the retractable screen".


)
Press the "SETUP"
button to gain access to the "SETUP"
menu.
This allows you to select from the following functions:


- "Language and speech",

- "Date and time",

- "Display",

- "Units",

- "System".



"SETUP" MENU


Language and speech

This menu allows you to:


- select the language used by the display (Deutsch, English,
Espanol, Français, Italiano, Nederlands, Polski, Portugues,
Portugues-Brasil, Türkçe * ),

- select the voice recognition parameters (activation/deactivation,
advice on use, personal voice programming, etc.),

- set the volume of the voice synthesiser.



Date and time

This menu allows you to set the date and time, the format of the date
and the format of the time (refer to the Peugeot Connect Media part of
the "Audio and Telematics" section.


Display

This menu allows you to set the brightness of the screen, the screen
colour scheme and the colour of the map (day/night or auto mode).


Units

This menu allows you to select the units: temperature (°C or °F) and
distance (miles or km).


System

This menu allows you to restore the factory confi guration, display the
software version and activate scrolling text.


* According to country. For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.

48
This screen is opened and stored automatically.
However, you can also open it, store it and adjust it using the various
manual controls:


- opening or storing by means of control A
,

- angle adjustments by means of control B
.
It is also fi tted with safety auto-reverse protection.



















ACCESS TO THE RETRACTABLE SCREEN


Opening the screen



)
With the screen stored, press control A
to open it.
The screen opens automatically when the ignition is switched on, when
the audio and telematics system is switched on, when an outgoing
telephone call is made, when a voice command is given and when a
warning message linked with the STOP warning lamp is received.

Closing the screen



)
With the screen open, press control A
to store it.
The screen is stored automatically when the ignition is switched off, after
approximately three seconds, if the audio and telematics system is off.
If you close the screen during operation of the audio and
telematics system, it will re-open automatically when an outgoing
telephone call is made, when a voice command is given or when a
warning message linked with the STOP warning lamp is received. If you wish the screen to open or close automatically when the
audio and telematics system is switched on or off, the screen must
not be closed when the audio and telematics system is operating.


Safety auto-reverse

If the screen meets an obstacle as it opens or closes, the movement
stops immediately and is reversed by a few millimetres.
After clearing the obstacle, issue the command required again.