multi function display PEUGEOT RCZ 2012 Owners Manual

Page 12 of 336

10
CENTRE CONSOLES



1.
Audio and telematic system microphone.

2.
Courtesy lamp / Map reading lamps /
Interior mood lighting.

3.
Seat belt and front passenger's air bag
warning lamps display.

4.
Interior volumetric sensors (alarm).

5.
Multifunction screen.

6.
Clock.

7.
Emergency call button.
Alarm button.
Central locking button.
Hazard warning lamps button.

Dynamic stability control (ESC/ASR/EBA) button.
Parking sensors button.
PEUGEOT services button.

8.
Peugeot Connect Sound (RD5) and
storage compartment, Peugeot Connect
Navigation (RT6) or Peugeot Connect
Media Navigation (NG4 3D).

9.
Heating / air conditioning controls.

10.
Front ashtray.

11 .
12 V accessories socket.

12.
Active spoiler control.

13.
Storage compartment or instrument panel
navigator associated with the Peugeot
Connect Media Navigation (NG4 3D).

14.
Cup holder.

15.
Front armrest / USB/Auxiliary socket.

Page 28 of 336

26









WARNING AND INDICATOR LAMPS

Visual indicators which inform the driver of the occurrence of a
fault (warning lamp) or of the operation of a system (operation or
deactivation indicator lamp).

When the ignition is switched on

Certain warning lamps come on for a few seconds when the ignition is
switched on.
When the engine is started, these warning lamps should go off.
If they remain on, before moving off, refer to the information for the
warning lamp concerned.


Associated warnings

The illumination, fi xed or fl ashing, of certain warning lamps may be
accompanied by an audible signal and a message in the screen.
Depending on your version of instrument panel, illumination of the
warning lamp is also accompanied by:


- a symbol in the central instrument panel screen and a message in
the multi-function screen,
or

- a symbol and a message in the central instrument panel screen.



Warning lamps

When the engine is running or the vehicle is being driven, the
illumination of one of the following warning lamps indicates a fault which
requires action on the part of the driver.
The illumination of a warning lamp is always accompanied by the
display of an additional message, to assist you in identifying the
fault.
If you encounter any problems, contact a PEUGEOT dealer or a
qualifi ed workshop.

Page 34 of 336

32










Deactivation warning lamps

If one of the following warning lamps comes on, this confi rms that the
corresponding system has been switched off intentionally.
It is accompanied by an audible signal and a message on the screen.
Depending on your version of instrument panel, illumination of the
deactivation lamp is also accompanied by:


- a symbol in the central instrument panel screen and a message in
the multifunction screen,
or

- a symbol and a message in the central instrument panel screen.




Warning lamp



is on



Cause



Action / Observations






Passenger's
front airbag


fi xed, in the seat
belt and front
passenger's
airbag warning
lamps display. The control switch, located
on the passenger's end of
the dashboard, is set to the
OFF
position.
The passenger's front airbag is
deactivated.
You can install a "rear-facing"
child seat on the front seat. Before installing a "rear-facing" child seat on the front seat,
it is essential
to deactivate the passenger's front airbag.
On the other hand, where no "rear-facing" child seat is
present, it is recommended that the airbag be reactivated:
set the control to the ON
position.




ESC/ASR


fi xed. The button, located in the centre
of the dashboard, is pressed. Its
indicator lamp is on.
The following functions are
deactivated.


- electronic stability
programme (ESC),

- anti-slip regulation or traction
control (ASR),

- automatic operation of
hazard warning lamps. Press the button again to reactivate these functions
manually. Its indicator lamp goes off.
These functions are reactivated automatically when the
vehicle is started.

Page 45 of 336

1/
INSTRUMENTS and CONTROLS

MAIN MENU



)
Press the "MENU"
button to gain access to the main menu
:


- audio functions,

- vehicle diagnostics,

- personalisation-confi guration,

- telephone (Bluetooth system).

)
Press the " 
" or " 
" buttons to select the menu required, then
confi rm by pressing the "OK"
button.



"AUDIO FUNCTIONS" MENU

With the Peugeot Connect Sound (RD5) switched on, once this menu
has been selected you can activate or deactivate the functions linked
with use of the radio (RDS, REG, RadioText) or the CD (introscan,
shuffl e, CD repeat).
For more information on the "Audio functions" application, refer to the
Peugeot Connect Sound (RD5) section.


"DIAGNOSIS VEHICLE" MENU

Once this menu has been selected, you can consult information
concerning the status of the vehicle.

Alert log

This summarises the active warning messages, displaying them in
succession on the multifunction screen.

)
On the " Diagnosis vehicle
" menu, select the following application:



)
Press the "MENU"
button to gain access to the main menu.

)
Press the arrows, then the "OK"
button to select the " Diagnosis
vehicle
" menu.

Page 47 of 336

1/
INSTRUMENTS and CONTROLS
With the Peugeot Connect Sound (RD5) switched on, once this menu
has been selected you can confi gure your Bluetooth hands-free system
(pairing), consult the various telephone directories (calls log, services...)
and manage your communications (pick up, hang up, call waiting,
secret mode...).
For more information on the "Telephone" application, refer to the
Peugeot Connect Sound (RD5) section.

"TELEPHONE" MENU


*
According to country.


Display configuration

Once this menu has been selected, you have access to the following
settings:


- brightness-video setting,

- date and time setting,

- choice of units.



Choice of language

Once this menu has been selected, you can change the language
used by the display (Deutsch, English, Espanol, Français, Italiano,
Nederlands, Portugues, Portugues-Brasil, Türkçe * ).

For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.

Page 49 of 336

1/
INSTRUMENTS and CONTROLS

For operation of the retractable screen (opening, closing,
adjustment of the position, etc.), refer to the "Access to the
retractable screen" section.



"SETUP" MENU




)
Press the "SETUP"
button to gain access to the confi guration
menu:


- "Display confi guration",

- "Voice synthesis",

- "Choice of language",

- "Vehicle parameters",

- "Alert log".



For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.


Display configuration

This menu allows you to choose a colour scheme for the screen, to
adjust the brightness, set the date and time and choose the units for
distance (km or miles), fuel consumption (l/100 km, mpg or km/l) and
temperature (°Centigrade or °Fahrenheit).
When setting the time, you can select " Synchronise minutes with
GPS
", so that the minutes are set automatically by satellite reception.


Voice synthesis

This men allows you to adjust the volume for navigation instructions and
to choose the type of voice (male or female).

*
Depending on version.

**
According to country of sale.


Choice of language

This menu allows you to choose the language used by the screen
(French, English, Italian, Portuguese, Spanish, German, Dutch, Turkish,
Polish, Russian).


Vehicle parameters *

This menu allows you to activate or deactivate certain driving and
comfort equipment, arranged by category:

- Parking assistance


- Operation of wipers




Enagages rear wiper linked to reverse (Rear wiper operates in
reverse gear; refer to "Visibility"),

- Lighting confi guration (see "Visibility"):




Duration of the guide-me-home lighting,


Directional headlamps (main/additional directional lighting),


Mood lighting (Interior mood lighting),


Daytime running lamps function ** .



Alert log

It lists the active alerts by displaying their associated messages in turn.

Page 51 of 336

1/
INSTRUMENTS and CONTROLS

For operation of the retractable screen (opening, closing,
adjustment of the position, etc.), refer to the "Access to the
retractable screen" section.



)
Press the "SETUP"
button to gain access to the "SETUP"
menu.
This allows you to select from the following functions:


- "Language and speech",

- "Date and time",

- "Display",

- "Units",

- "System".



"SETUP" MENU


Language and speech

This menu allows you to:


- select the language used by the display (Deutsch, English,
Espanol, Français, Italiano, Nederlands, Polski, Portugues,
Portugues-Brasil, Türkçe * ),

- select the voice recognition parameters (activation/deactivation,
advice on use, personal voice programming, etc.),

- set the volume of the voice synthesiser.



Date and time

This menu allows you to set the date and time, the format of the date
and the format of the time.

Principle of GPS (GMT) synchronisation:


1.
Confi rm the selection "Synchronise with GPS", the time is then
aligned with GMT universal time, the date is updated as well.

2.
Using the 4-direction navigator, move the cursor onto the hours fi eld
and press on OK
.

3.
Using the rotating ring, you can then adjust the time to the time
zone of your choice.
Note that in the case of a summer/winter time change, the time
zone must be set again manually.



Units

This menu allows you to select the units: temperature (°C or °F) and
distance (miles or km).


System

This menu allows you to restore the factory confi guration, display the
software version and activate scrolling text.

For safety reasons, confi guration of the multifunction screen by
the driver must only be done when stationary.



Display

This menu allows you to set the brightness of the screen, the screen
colour scheme and the colour of the map (day/night or auto mode).

*
According to country.

Page 88 of 336

86
USB PLAYER

This connection box, consisting of a USB port, is located in the front
armrest.
It permits the connection of portable equipment, such as an iPod
®

digital audio player of generation 5 or later or a USB memory stick.
It reads the audio fi le formats (mp3, ogg, wma, wav...) which are
transmitted to your audio equipment and played via the vehicle's
speakers.
You can manage these fi les using the steering mounted controls or the
audio equipment control panel and display them in the multifunction
screen.

When it is in use, the portable equipment charges automatically.

For more information on the use of this equipment, refer to the
corresponding audio section.
PEUGEOT CONNECT USB


This connection box, consisting of a JACK socket and a USB port, is
located in the front armrest.
With the USB port, it permits the connection of portable equipment,
such as a digital audio player of the iPod
® or USB memory stick type.
With the JACK socket, it permits the connection of any type of portable
player.
It reads the audio fi le formats (mp3, ogg, wma, wav...) which are
transmitted to your audio equipment and played via the vehicle's
speakers.
If the equipment is connected to the USB port, you can manage these
fi les using the steering mounted controls or the audio equipment control
panel and display them in the multifunction screen.

If the equipment is connected to the USB port, when it is in use,
the portable equipment charges automatically.

For more information on the use of this equipment, refer to the
Peugeot Connect Sound (RD5) or Peugeot Connect Navigation
(RT6) section.

Page 145 of 336

6/
DRIVING

Deactivation / Activation of the front and rear parking sensors

Visual assistance







FRONT PARKING SENSORS

In addition to the rear parking sensors, the front parking sensors are
triggered when an obstacle is detected in front and the speed of the
vehicle is still below 6 mph (10 km/h).
The front parking sensors are interrupted if the vehicle stops for more
than three seconds in forward gear, if no further obstacles are detected
or when the speed of the vehicle exceeds 6 mph (10 km/h).
This supplements the audible signal by displaying bars in the
multifunction screen which move progressively nearer to the vehicle.
When the obstacle is near, the "Danger" symbol is displayed in the
screen.

The function is deactivated by pressing this button. The indicator lamp
in the button comes on.
Pressing this button again reactivates the function. The indicator lamp in
the button goes off.

The sound emitted by the speaker (front or rear) indicates whether the
obstacle is in front or behind.

Page 185 of 336

8/
PRACTICAL INFORMATION


Fuse N°



Rating


Functions



F13



5 A

Engine fusebox, active bonnet.


F14



15 A

Multifunction screen, seat belt and
passenger's front airbag warning lamps
display, instrument panel screen, amplifi er,
Bluetooth system, parking sensors control
unit, Peugeot Connect USB.


F15



30 A

Locking and deadlocking.


F17



40 A

Rear screen and door mirrors demist/
defrost.


SH



-

PARC shunt.


Fuse N°



Rating


Functions



G36



30 A

Hi-Fi amplifi er.


G37



30 A

Passenger's seat memory unit.


G38



30 A

Driver's seat memory unit.


G39



5 A

Lighting memory unit.


G40



30 A

Driver and passenger heated seats.
Box 2


Page:   1-10 11-20 next >