buttons Ram ProMaster 2018 Quick Reference Guide

Adjustable Armrests — If
Equipped
The seat adjustable armrest can be raised and
adjusted for height. Underneath the front of the
armrest is the adjuster wheel which will adjust
the height of the armrest up or down.
Turn the adjuster wheel to the right or left to
adjust the height of the armrest up or down.
Power Folding Mirrors — If
Equipped
The switch for the power folding mirrors is
located on the driver’s door panel below the
power mirror controls. The power fold mirrors
are designed to be folded and unfolded using
the power folding switch.
Operation
• Push the switch to the right and the mirrorswill fold in.
• Push the switch to the left and the mirrors will return to the normal driving position.
To Reset The Power Folding Mirror
1. Push the switch to the right and the mirrors will fold in to the closed position.
2. Push the switch to the left and the mirrors will return to the open position.
NOTE:
The intended use of the power fold mirrors is by
pushing the buttons to fold and unfold the
mirrors. Only manually fold the mirrors when
necessary. Forward Folding
Mirrors can be folded forward manually or by
accidental impact. In this case, it is possible to
restore to position both ways, manually and
electrically.
Adjuster Wheel
MIRRORS

Instrument Cluster Display
Controls
The instrument cluster display features a driver
interactive display that is located in the instru-
ment cluster. Pushing the controls on the left
side of the steering column allows the driver to
select vehicle information and Personal Set-
tings.• Push the
uparrow button to scroll upward
through the main menus (Menu, Outside
Temperature Display, Trip Functions, Date,
Time) and sub menus.
• Push the downarrow button to scroll down-
ward through the main menus and sub
menus.
• Push the MODEbutton for access to main
menus, sub menus or to select a personal
setting in the setup menu. Push and hold the
MODE button for two seconds to reset fea-
tures.
• Push and hold the MODEbutton for two
seconds to reset displayed/selected features
that can be reset.
For further information, and applicable warn-
ings and cautions, please refer to the Owner’s
Manual at www.mopar.com/en-us/care/
owners-manual.html (U.S. Residents) or
www.owners.mopar.ca (Canadian Residents).
Speed Beep
This function makes it possible to set the ve-
hicle speed limit (MPH or km/h). When this
limit is exceeded the driver is immediately
alerted.
To set the desired speed limit, proceed as
follows:
• Briefly press the MODE button: the display will show the wording (Speed Beep)
• Push button or to select speed limit activa- tion (On) or deactivation (Off)
• If the function has been activated (On), push the upordown arrow buttons to select the
desired speed limit and then push MODE to
confirm.
Instrument Cluster Display Controls
INSTRUMENT CLUSTER
DISPLAY