jacking RENAULT MEGANE 2000 X64 / 1.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine 13
2
4
QXBIUDB*T[G      3DJH 
MEGANE CABRIOLET NU 640-2C:\Documentum\Checkout
u640-2_eng_T5.WIN 24/2/2001 14:44-page5
5.05
CHANGING A WHEEL
Park your vehicle on firm,
flat ground (if necessary,
placing a plank under the
base of the jack).
Switch on the hazard warning
lights.
Apply the handbrake and engage a
gear (first or reverse orPon an
automatic gearbox).
Ask all the passengers to get out of
the vehicle and keep them away
from moving traffic.• If necessary, remove the wheel
embellisher.
• Use the wheelbrace1to slacker
off the wheel bolts slightly. Fit it
so that you press downwards and
not upwards.
• Offer up the jack horizontally, the
jack head must be slid underneath
the jacking point2under the body,
nearest the wheel concerned.• Screw up the jack by hand at first
to align the base plate (which
should be inclined further
inwards than the jack head). Use a
piece of wood under the base
plateifonsoftground.
• Insert the end of the wheelbrace4
into the jack3andturnafew
times to lift the wheel off the
ground.
• Remove the bolts.
•Takeoffthewheel.
• Position the emergency spare
wheel on the central hub and turn
it to locate the mounting holes in
the wheel and the hub.
• Tighten the bolts and lower the
jack.
• Tighten the bolts fully when the
wheel is on the ground.
If you have a puncture,
replace the wheel as soon
as possible.
A tyre which has been
punctured should always be
inspected (and repaired, if
possible) by a specialist.