key battery RENAULT PULSE 2012 1.G Owners Manual


> (GLW    0RGHO .$2(0B5HQDXOW @
2-14Instruments and controls
CAUTION:
Do not continue driving if the alternator belt is
loose, broken or missing.
Door open warning light (if e\fuipped)
\bhen the ignition switch is in the “ON” position, the
door open warning light illuminates if any of the doors
are open or not closed securely.
Electric power steering warning light
\bhen the ignition switch is in the “ON” position, the
electric power steering warning light illuminates. After
starting the engine, the electric power steering warning
light turns off. This indicates the electric power
steering system is operational.
If the electric power steering warning light illuminates
while the engine is running, it may indicate the electric
power steering system is not functioning properly and
may need servicing. Have the electric power steering
system checked by a RENAULT dealer.
\bhen the electric power steering warning light
illuminates with the engine running, the power assist
to the steering will cease operation but you will still
have control of the vehicle. At this time, greater
steering efforts are re\fuired to operate the steering
wheel, especially in sharp turns and at low speeds.
(See “Electric power steering system” (P.5-35) .)
Engine oil pressure warning light
\bhen the ignition switch is in the “ON” position, the
engine oil pressure warning light illuminates. After
starting the engine, the engine oil pressure warning
light turns off. This indicates that the oil pressure
sensors in the engine are operational.
If the engine oil pressure warning light illuminates or
blinks while the engine is running, it may indicate that
the engine oil pressure is low.
Stop the vehicle safely as soon as possible. Stop the
engine immediately and call a RENAULT dealer.
CAUTION:
.Running the engine with the engine oil
pressure warning light illuminated could
cause serious damage to the engine.
. The engine oil pressure warning light is not
designed to indicate a low oil level. The oil
level should be checked using the dipstick.
(See “Engine oil” (P.8-10) .)
High temperature warning light (red)
\bhen the ignition switch is in the “ON” position, the
high temperature warning light illuminates and then
turns off. This indicates that the high temperature
sensor in the engine coolant system is operational.
CAUTION:
If the high temperature warning light illuminates
while the engine is running, it may indicate the
engine temperature is extremely high.
Stop the vehicle safely as soon as possible. If the vehicle is overheated, continuing vehicle
operation may seriously damage the engine.
(See “If your vehicle overheats” (P.6-10) for the
immediate action required.)
Intelligent Key system warning light (if
e\fuipped)
After the ignition switch is placed in the “ON” position,
this light comes on for about 2 seconds and then turns
off.
This light illuminates or blinks as follows:
. The light blinks in yellow when the door is closed
with the Intelligent Key left outside the vehicle and
the ignition switch in the “ACC” or “ON” position.
Make sure that the Intelligent Key is inside the
vehicle (for model without vehicle information
display) .
. The light blinks in green when the Intelligent Key
battery is running out of power. Replace the
battery with a new one (for model without vehicle
information display) . See “Battery” (P.8-23) .
. The light illuminates in yellow when it warns of a
malfunction with the electrical steering lock
system or the Intelligent Key system.
If the warning light illuminates in yellow while the
engine is stopped, it may be impossible to free the
steering lock or to start the engine. If the light comes
on while the engine is running, you can drive the
vehicle. However in these cases, contact a RENAULT
dealer for repair as soon as possible.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3. NO KEY warning
This warning appears in either \ff the f\fll\fwing
c\fn\biti\fns.
No key inside the vehicle:
The warning appears when the \b\f\fr is cl\fse\b with the
Intelligent Key left \futsi\be the vehicle an\b the igniti\fn
switch in the “ACC” \fr “ON” p\fsiti\fn. Make sure that
the Intelligent Key is insi\be the vehicle.
Unregistered Intelligent Key:
The warning appears when the igniti\fn switch is
pushe\b fr\fm the “LOCK” p\fsiti\fn an\b the Intelligent
Key cann\ft be rec\fgnize\b by the system. Y\fu cann\ft
start the engine with an unregistere\b key. Use the
registere\b Intelligent Key.
See “Intelligent Key system” (P.3-9) f\fr m\fre \betails.
4. SHIFT “P” warning (AT/CVT m\f\bel)
This warning appears when the igniti\fn switch is
pushe\b t\f st\fp the engine with the select\fr lever in any
p\fsiti\fn except the “P” (Park) p\fsiti\fn.
If this warning appears, m\fve the select\fr lever t\f the
“P” (Park) p\fsiti\fn \fr push the igniti\fn switch t\f the
“ON” p\fsiti\fn.
An insi\be warning chime will als\f s\fun\b. (See
“Intelligent Key system” (P.3-9) .)
5. “PUSH” warning (AT/CVT m\f\bel)
This warning appears when the select\fr lever is m\fve\b
t\f the “P” (Park) p\fsiti\fn with the igniti\fn switch in the
“ACC” p\fsiti\fn after the SHIFT “P” warning appears.
T\f push the igniti\fn switch t\f the “OFF” p\fsiti\fn,
perf\frm the f\fll\fwing pr\fce\bure:
SHIFT“P”warning ?(M\fve the select\fr lever t\f
“P”) ?PUSH warning ?(Push the igniti\fn switch ?
igniti\fn switch p\fsiti\fn is turne\b t\f “ON”) ?PUSH warning
?(Push the igniti\fn switch ?igniti\fn
switch p\fsiti\fn is turne\b t\f “OFF”)
6. Intelligent Key battery \bischarge in\bicat\fr
This in\bicat\fr appears when the Intelligent Key battery
is running \fut \ff p\fwer.
If this in\bicat\fr appears, replace the battery with a new
\fne. (See “Battery” (P.8-23) .)
7. Engine start \fperati\fn in\bicat\fr (Manual
Transmissi\fn m\f\bels)
This in\bicat\fr means that the engine will start by
pushing the igniti\fn switch with the clutch pe\bal
\bepresse\b.
8. Cruise c\fntr\fl in\bicat\fr (f\fr Eur\fpe)
The cruise main switch in\bicat\fr (CRUISE) is \bis-
playe\b when the cruise c\fntr\fl main switch is pushe\b.
When the main switch is pushe\b again, the CRUISE
in\bicat\fr \bisappears. When the CRUISE in\bicat\fr is
\bisplaye\b, the cruise c\fntr\fl system is \fperati\fnal.
The cruise c\fntr\fl set in\bicat\fr (SET) is \bisplaye\b
while the vehicle spee\b is c\fntr\flle\b by the cruise
c\fntr\fl system. If the SET in\bicat\fr blinks while the
engine is running, it may in\bicate that the cruise c\fntr\fl
system is n\ft functi\fning pr\fperly. Have the system
checke\b by a RENAULT \bealer.
F\fr m\fre \betails, see “Cruise c\fntr\fl” (P.5-28) .
9. Spee\b limiter in\bicat\fr (f\fr Eur\fpe)
The spee\b limiter main switch in\bicat\fr (LIMIT) is
\bisplaye\b when the spee\b limiter main switch is
pushe\b. When the main switch is pushe\b again, the
LIMIT in\bicat\fr \bisappears.
The spee\b limiter set in\bicat\fr (SET) is \bisplaye\b while
the spee\b limiter is activate\b.
F\fr m\fre \betails, see “Spee\b limiter (if equippe\b f\fr Eur\fpe)” (P.5-26) .
10. Mechanical Key LOCK warning (if
equippe\b f\fr Eur\fpe)
The warning appears when the igniti\fn switch is left in
the “ACC” \fr “OFF” p\fsiti\fn instea\b \ff c\fmpletely
being turne\b t\f the “LOCK” p\fsiti\fn.
If this warning appears, turn the igniti\fn switch t\f the
“LOCK” p\fsiti\fn.
When the igniti\fn switch is in the “ON” p\fsiti\fn, a
buzzer will s\fun\b twice an\b the Mechanical Key LOCK
warning sh\fws when the igniti\fn switch is turne\b t\f
the “ACC” \fr “OFF” p\fsiti\fn. This is t\f warn the \briver
that the igniti\fn switch is n\ft in the “LOCK” p\fsiti\fn.
Make sure the select\fr lever is in the “P” (Park)
p\fsiti\fn (f\fr CVT m\f\bel) \fr the shift lever is in the “N”
(Neutral) p\fsiti\fn (f\fr MT m\f\bel) an\b then turn the
igniti\fn switch t\f the “LOCK” p\fsiti\fn.
CAUTION:
.
The steering wheel can only be locked when
the ignition switch is in the “LOCK” position
(if equipped) . Make sure the ignition switch
is in the “LOCK” position before leaving the
vehicle.
. The mechanical key can only be removed at
the “LOCK” position. Make sure the ignition
switch is in the “LOCK” position before
removing the mechanical key.
See “Igniti\fn switch (m\f\bel with\fut intelligent Key
system)” (P.5-5) f\fr further \betails.
Instruments and controls2-21
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-30Instruments and controls
position
Theposition turns on the headlights in addition to
the other lights\f
Headlight beam
\bIC3785
To turn on the high beam, push the lever towards the
front position*1\f
To turn off the high beam, return the lever to the neutral
position
*2\f
To flash the headlights, pull the lever towards the
rearmost position
*3\f The headlights can be flashed
even when the headlights are not on\f If equipped, when the lever is pulled towards the
rearmost position
*3after the ignition switch is
placed in the “OFF” or “LOCK” position, the headlight
will turn on and stay on for 30 seconds\f The lever can
be pulled 4 times for up to 2 minutes\f
Daytime light system (if equipped)
Even if the headlight switch is off, the daytime lights
will come on after starting the engine\f However, you
cannot change low beam to high beam when the light
switch is off\f
When the light switch is turned to the
position,
the headlight low beam will turn off\f
BATTERY \bAVER \bY\bTEM
The light reminder chime will sound if the driver’s door
is opened while the following improper operations
occur:
. The headlight switch is in either the
orposition, and the ignition switch in the “ACC”,
“OFF” or “LOCK” position\f
. The headlight switch is in the “AUTO” position and
the front or rear fog light (if equipped) is turned on
while the ignition switch is in the “ACC”, “OFF” or
“LOCK” position\f
Be sure to turn the headlight switch to the “OFF”
position when you leave the vehicle\f
Type A
When the headlight switch is in the
orposition while the engine is running, the lights will
automatically turn off after pushing the ignition switch
to the “ACC”, “OFF” or “LOCK” position and opening
the driver’s side door\f
When the headlight switch remains in either the
orposition after the lights automatically turn off,
the lights will turn on when the engine is started\f Type B
If the doors are closed and locked with the remote
controller, the Intelligent Key or the door request
switch (if equipped) while the headlight switch is in
either the
orposition, the battery saver
function will turn off the lights to prevent the battery
from being discharged\f The lights will turn on when the
doors are being opened\f
CAUTION:
Do not leave the lights on when the engine is not
running for extended periods of time to prevent
the battery from being discharged.
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
Driver’s window switch
The driver’s switch, which is the main switch, can
control all windows\f
Locking passengers’ windows:
JVI\b\b36XFront and rear typeWhen the lock button*1is pushed in, the passen-
gers’ windows cannot be operated\f
To cancel the passengers’ windows lock, push the lock
button
*1again\f
Passenger’s window switch
SIC2311
The passenger’s switch can control its corresponding
window\f When the passengers’ windows lock button on the
driver’s switch is pushed in, the passenger’s switch
cannot be operated\f
Automatic function
JVI\b\b37XFront and rear typeAutomatic function is available for the switch that has
anmark on its surface\f
The automatic function enables a window to fully open
or close (if equipped) without holding the switch down
or up\f
To fully open the window, push the power window
switch down to the second detent and release the
switch\f To fully close the window (if equipped) , pull the
power window switch up to the second detent and
release the switch\f The switch does not have to be
held during window operation\f
To stop the window open/close operation during the
automatic function, push down or pull up the switch in
opposite directions\f Window timer (if equipped):
The window timer allows the window switch to be
operated for 15 minutes even if the ignition switch is
turned off and the key is removed\f The window timer
will be cancelled when the corresponding door is
opened or the preset time has expired\f
Auto-reverse function (if equipped):
WARNING:
There is a small distance just before the closed
position which cannot be detected. Make sure
that all passengers have their hands, etc. inside
the vehicle before closing the windows.
The auto-reverse function enables a window to
automatically reverse when something is caught in
the window as it is closing by the automatic function\f
When the control unit detects an obstacle, the window
will be lowered immediately\f
Depending on the environment or driving conditions,
the auto-reverse function may activate if an impact or
load similar to something being caught in the window
occurs\f
When power window switch does not oper-
ate
Some power window functions (automatic close
function, auto-reverse function) will not operate as
described after the battery cable is disconnected and
the electrical supply is interrupted\f Perform the
following procedure to initialize the power window
functions\f
1\f Turn the ignition switch to the "ON" position\f
2\f If the driver’s window is closed, open it completely
by operating the driver’s window switch\f
Instruments and controls2-37
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
2-42Instruments and controls
CAUTION:
.Do not leave the light switch on when the
engine is not running for extended periods
of time to prevent the battery from being
discharged.
. Turn off the lights when you leave the
vehicle.
JVI0022X
ROOM LIGHT
The roo\f ligh\b*Ahas a \bhree-posi\bion swi\bch.
When \bhe swi\bch is in \bhe on posi\bion
*3, \bhe ligh\b
illu\fina\bes.
When \bhe swi\bch is in \bhe cen\ber posi\bion
*2, \bhe roo\f
ligh\b illu\fina\bes when a door is opened.
The in\berior ligh\b \bi\fer will keep \bhe roo\f ligh\b on for
approxi\fa\bely 15 seconds or 30 seconds when:
. The key is re\foved fro\f \bhe igni\bion swi\bch wi\bh all
doors closed (\fodel wi\bhou\b In\belligen\b Key
sys\be\f) .
. The igni\bion swi\bch is placed in \bhe "OFF" or
LOCK" posi\bion (\fodel wi\bh In\belligen\b Key sys-
\be\f) . .
The driver’s door is unlocked wi\bhou\b \bhe key in \bhe
igni\bion swi\bch (\fodel wi\bhou\b In\belligen\b Key
sys\be\f) .
. The doors are unlocked wi\bh \bhe UNLOCK bu\b\bon
(on \bhe keyfob or In\belligen\b Key) or \bhe reques\b
swi\bch (\fodel wi\bh In\belligen\b Key sys\be\f) wi\bh \bhe
igni\bion swi\bch in \bhe "LOCK" posi\bion.
. The driver’s door is opened and \bhen closed wi\bh
\bhe igni\bion swi\bch in \bhe "LOCK" posi\bion and
wi\bhou\b \bhe key in \bhe igni\bion swi\bch.
The in\berior ligh\b \bi\fer will be cancelled when:
. The driver’s door is locked.
. The igni\bion swi\bch is \burned \bo \bhe “ON” posi\bion.
When \bhe swi\bch is in \bhe off posi\bion
*1, \bhe roo\f
ligh\b does no\b illu\fina\be, regardless of any condi\bion.
FRONT MAP LIGHTS (if equipped)
To \burn on \bhe fron\b \fap ligh\b*B(if equipped) , push
\bhe on swi\bch*2, and \bhe ligh\b illu\fina\bes. To \burn off,
push \bhe off swi\bch*1.
Ba\b\bery saver sys\be\f
If any door is lef\b open for a period of \bi\fe wi\bh \bhe
roo\f ligh\b swi\bch placed horizon\bally or \bhe roo\f
con\brol swi\bch in \bhe cen\ber posi\bion
*2, \bhe roo\f ligh\b
will au\bo\fa\bically \burn off.
INTERIOR LIGHTS
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3 Pre-driving checks and adjustments
Keys ..................\(..................\(..........................\(..................\(..................\(........... 3-2Key ..................\(..................\(.....................\(..................\(..................\(........... 3-2
Anti-Theft System key (if e\fuipped\b ..................\(..................\(........ 3-2
Intelligent Key (if e\fuipped\b ..................\(..................\(....................... 3-3
Door locks ..................\(..................\(...............................\(..................\(............ 3-4 Super lock system (if e\fuipped\b ..................\(..................\(............... 3-4
Locking with key ..................\(..................\(...............................\(............. 3-5
Locking with inside lock knob ..................\(..................\(..................\(. 3-5
Locking with power door lock switch (if e\fuipped\b ................ 3-6
Vehicle speed sensing door lock mechanism (if e\fuipped\b .... 3-6
Auto door lock releasing mechanism (if e\fuipped\b ................. 3-6
Child safety rear door lock ..................\(..................\(..................\(....... 3-7
Remote keyless entry system (if e\fuipped\b ..................\(..................\(. 3-7 Using remote keyless entry system (if e\fuipped\b ..................\(.. 3-7
Intelligent Key system (if e\fuipped\b ..................\(..................\(............... 3-9 Operating range ..................\(..................\(...............................\(.......... 3-10
Using intelligent Key system ..................\(..................\(................... 3-10
Battery saver system ..................\(..................\(..................\(............... 3-12
Warning and audible reminders ..................\(..................\(............. 3-12
Trouble shooting guide ..................\(..................\(..................\(........... 3-13
Using remote keyless entry function ..................\(..................\(..... 3-15 Security system (if e\fuipped\b ..................\(..................\(..................\(.... 3-16
Theft warning system ..................\(..................\(..................\(........... 3-16
Anti-Theft System ..................\(..................\(..........................\(.......... 3-17
Hood ..................\(..................\(..................\(..................\(..................\(............. 3-18 Opening hood ..................\(..................\(..................\(..................\(...... 3-18
Closing hood ..................\(..................\(.....................\(..................\(..... 3-18
Back door ..................\(..................\(...............................\(..................\(......... 3-19 Opening back door ..................\(..................\(..................\(............... 3-19
Fuel filler lid ..................\(..................\(..................\(.......................\(.............. 3-19 Opening fuel filler lid ..................\(..................\(..................\(............ 3-19
Fuel filler cap ..................\(..................\(.....................\(..................\(..... 3-20
Steering wheel ..................\(..................\(..................\(..................\(.............. 3-20
Mirrors ..................\(..................\(.....................\(..................\(..................\(........ 3-20 Inside rearview mirror ..................\(..................\(..................\(........... 3-20
Outside rearview mirrors ..................\(..................\(....................... 3-21
Vanity mirrors (if e\fuipped\b ..................\(..................\(................... 3-23
Parking brake ..................\(..................\(..................\(............................\(...... 3-23 Lever type ..................\(..................\(..................\(..................\(.............. 3-23
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
CHILD SAFETY REAR DOOR LOCK
SPA2037
T\fe c\fi\bd safety rear door \bocks \fe\bp prevent rear doors
from being opened accidenta\b\by, especia\b\by w\fen sma\b\b
c\fi\bdren are in t\fe ve\fic\be.
W\fen t\fe \bevers are in t\fe \bock position
*1, t\fe c\fi\bd
safety rear door \bocks engage and t\fe rear doors can
on\by be opened by t\fe outside door \fand\bes.
To disengage, move t\fe \bevers to t\fe un\bock position
*2. T\fe remote key\bess entry system can operate a\b\b door
\bocks (inc\buding t\fe back door) using t\fe remote
contro\b\ber. T\fe remote contro\b\ber can operate at a
distance of approximate\by 1 m (3.3 ft) away from t\fe
ve\fic\be. T\fe operating distance depends upon t\fe
conditions around t\fe ve\fic\be.
As many as 5 remote contro\b\bers can be used wit\f one
ve\fic\be. For information about t\fe purc\fase and use of
additiona\b remote contro\b\bers, contact a RENAULT
dea\ber.
T\fe remote contro\b\ber wi\b\b not function under t\fe
fo\b\bowing conditions:
.
W\fen t\fe distance between t\fe remote contro\b\ber
and ve\fic\be is more t\fan approximate\by 1 m (3.3
ft) .
. W\fen t\fe remote contro\b\ber battery is disc\farged.
. W\fen t\fe key is in t\fe ignition switc\f.
CAUTION:
.When locking the doors using the remote
controller, be sure not to leave the key in the
vehicle.
. Do not allow the remote controller, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the remote controller.
. Do not strike the remote controller sharply
against another object.
. Do not place the remote controller for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. When the outside temperature is extremely
low, the remote keyless entry system may not function properly.
If a remote contro\b\ber is \bost or sto\ben, RENAULT
recommends erasing t\fe ID code of t\fat remote
contro\b\ber from t\fe ve\fic\be. T\fis may prevent t\fe
unaut\forized use of t\fe remote contro\b\ber to un\bock
t\fe ve\fic\be. For information regarding t\fe erasing
procedure, contact a RENAULT dea\ber.
For information regarding t\fe rep\bacement of a battery,
see “Remote contro\b\ber battery” (P.8-24) .
USING REMOTE KEYLESS ENTRY SYSTEM
(if equipped)
JVP0213XType A (with panic alarm)*1LOCK button
*2UNLOCK button
*3PANIC button
*4Battery indicator \big\ft
Pre-driving checks and adjustments3-7
REMOTE KEYLESS ENTRY SYSTEM
(if equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
SPA2406Type A (with panic alarm)
SPA2502Type B (without panic alarm)1. Intelligent Key \f2)
2. Mec\banical key \finside t\be Intelligent Key) \f2)
3. Key number plate
WARNING:
.Radio waves could adversely affect electric
medical equipment. Those who use a pace-
maker should contact the electric medical
equipment manufacturer for the possible
influences before use.
. The Intelligent Key transmits radio waves
when the buttons are pushed. The radio waves may affect aircraft navigation and
communication systems. Do not operate the
Intelligent Key while on an airplane. Make
sure the buttons are not operated uninten-
tionally when the unit is stored during a
flight.
T\be Intelligent Key system can operate all t\be door
\fincluding t\be back door) locks using t\be remote
controller function or pus\bing t\be request switc\b on
t\be ve\bicle wit\bout taking t\be key out from a pocket or
purse. T\be operating environment and/or conditions
may affect t\be Intelligent Key system operation.
Be sure to read t\be following before using t\be
Intelligent Key system.
CAUTION:
. Be sure to carry the Intelligent Key with you
when operating the vehicle.
. Never leave the Intelligent Key in the vehicle
when you leave the vehicle.
. When the outside temperature is extremely
low, the Intelligent Key system may not
function properly.
T\be Intelligent Key is always communicating wit\b t\be
ve\bicle as it receives radio waves. T\be Intelligent Key
system transmits weak radio waves. Environmental
conditions may interfere wit\b t\be operation of t\be
Intelligent Key system under t\be following operating
conditions.
. W\ben operating near a location w\bere strong
radio waves are transmitted, suc\b as a TV tower,
power station and broadcasting station.
. W\ben in possession of wireless equipment, suc\b
as a cellular telep\bone, transceiver, and CB radio. .
W\ben t\be Intelligent Key is in contact wit\b or
covered by metallic materials.
. W\ben any type of radio wave remote control is
used nearby.
. W\ben t\be Intelligent Key is placed near an electric
appliance suc\b as a personal computer.
. W\ben t\be ve\bicle is parked near a parking meter.
In suc\b cases, correct t\be operating conditions before
using t\be Intelligent Key function or use t\be mec\banical
key.
Alt\boug\b t\be life of t\be battery varies depending on t\be
operating conditions, t\be battery’s life is approximately
2 years. If t\be battery is disc\barged, replace it wit\b a
new one.
For information regarding replacement of a battery, see
“Intelligent key battery” \fP.8-25) .
Since t\be Intelligent Key is continuously receiving radio
waves, if t\be key is left near equipment w\bic\b transmits
strong radio waves, suc\b as signals from a TV and
personal computer, t\be battery life may become
s\borter.
To start t\be engine w\ben t\be Intelligent Key battery is
disc\barged, see “Pus\b-button ignition switc\b \fmodel
wit\b Intelligent Key system)” \fP.5-6) . Replace t\be
disc\barged battery wit\b a new one as soon as
possible.
Because t\be steering w\beel is locked electrically,
unlocking t\be steering w\beel wit\b t\be ignition switc\b in
t\be “LOCK” position is impossible w\ben t\be ve\bicle
battery is completely disc\barged. In t\bis case, unlock-
ing t\be steering w\beel would be also impossible. Pay
special attention t\bat t\be ve\bicle battery is not
completely disc\barged.
As many as 4 Intelligent Keys can be used wit\b one
ve\bicle. For information about t\be purc\base and use of
additional Intelligent Keys, contact a RENAULT dealer.
Pre-driving checks and adjustments3-9
INTELLIGENT KEY SYSTEM (if
equipped)
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-10Pre-driving checks and adjustments
CAUTION:
.Do not allow the Intelligent Key, which
contains electrical components, to come
into contact with water or salt water. This
could affect the system function.
. Do not drop the Intelligent Key.
. Do not strike the Intelligent Key sharply
against another object.
. Do not change or modify the Intelligent Key.
. Wetting may damage the Intelligent Key. If
the Intelligent Key gets wet, immediately
wipe until it is completely dry.
. If the outside temperature is below í108C
(148F) , the battery of the Intelligent Key may
not function properly.
. Do not place the Intelligent Key for an
extended period in an area where tempera-
tures exceed 608C (1408F) .
. Do not attach the Intelligent Key with a key
holder that contains a magnet.
. Do not place the Intelligent Key near equip-
ment that produces a magnetic field, such as
a TV, audio equipment and personal compu-
ters or cellular phones.
If an Intelligent Key is lost or stolen, \fENA\bLT
recommends erasing the ID code of that Intelligent
Key from the vehicle. This may prevent the unauthor-
ized use of the Intelligent Key to operate the vehicle.
For information regarding the erasing procedure,
contact a \fENA\bLT dealer.
The Intelligent Key function can be disabled. For
information about disabling the Intelligent Key function,
contact a \fENA\bLT dealer.
OPE\fATING \fANGE
SPA2038
The Intelligent Key functions can only be used when
the Intelligent Key is within the specified operating
range from the request switch
*1.
When the Intelligent Key battery is discharged or
strong radio waves are present near the operating
location, the Intelligent Key system’s operating range
becomes narrower, and the Intelligent Key may not
function properly.
The operating range is within 80 cm (31.50 in) from
each request switch
*1.
If the Intelligent Key is too close to the door glass,
handle or rear bumper the request switches may not
function.
When the Intelligent Key is within the operating range,
it is possible for anyone, even someone who does not
carry the Intelligent Key, to push the request switch
and lock/unlock the doors.
\bSING INTELLIGENT KEY SYSTEM
JVP0088X
The request switch will not function under the following
conditions:
. When the Intelligent Key is left inside the vehicle
. When the Intelligent Key is not within the
operational range
. When any door is open or not closed securely
. When the Intelligent Key battery is discharged
. When the ignition switch is in the “ACC” or “ON”
position
&RQGLWLRQ


> (GLW    0RGHO .$2(0B5HQDXOW @
3-12Pre-driving checks and adjustments
.When the Intelligent Key is placed inside of
the glove box.
. When the Intelligent Key is placed inside of
the door pockets.
. When the Intelligent Key is placed on or
under the spare tire area.
. When the Intelligent Key is placed inside or
near metallic materials.
The lockout protection may function when the
Intelligent Key is outside the vehicle but is too
close to the vehicle.
Unlocking doors
All door unlock:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch
*Aor back
door reques\f swi\fch*B.
3. All doors and \fhe back door will be unlocked.
4. The hazard indica\for flashes \fwice.
If a door handle is pulled while unlocking \fhe doors,
\fha\f door may no\f be unlocked. Re\furning \fhe door
handle \fo i\fs original posi\fion will unlock \fhe door. If \fhe
door does no\f unlock, af\fer re\furning \fhe door handle,
push \fhe door handle reques\f swi\fch \fo unlock \fhe
door.
Selective door unlock mode:
1. Carry \fhe In\felligen\f \bey wi\fh you.
2. Push \fhe door handle reques\f swi\fch (driver’s or fron\f passenger’s)
*Aor back door reques\f
swi\fch*B.
3. The corresponding door will be unlocked. 4. Push \fhe door handle reques\f swi\fch (driver’s or
fron\f passenger’s)
*Aor back door reques\f
swi\fch*Bagain wi\fhin 5 seconds.
5. All doors will be unlocked.
Switching door unlock mode (if equipped) :
To swi\fch \fhe door unlock mode from one \fo ano\fher,
see “Using remo\fe keyless en\fry sys\fem” (P.3-7) .
Automatic relock:
All doors will be locked au\foma\fically unless one of \fhe
following opera\fions is performed wi\fhin 30 seconds
af\fer pushing \fhe reques\f swi\fch while \fhe doors are
locked.
. Opening any doors.
. Pushing \fhe igni\fion swi\fch.
If during \fhe prese\f \fime period \fhe “UNLOC\b”
bu\f\fon on \fhe In\felligen\f \bey is pushed, all doors will be
locked au\foma\fically af\fer \fhe nex\f prese\f \fime.
BATTERY SAVER SYSTEM
When all \fhe following condi\fions are me\f for a period
of \fime, \fhe ba\f\fery saver sys\fem will cu\f off \fhe power
supply \fo preven\f ba\f\fery discharge.
. The igni\fion swi\fch is in \fhe “ACC” posi\fion, and
. All doors are closed, and
. The selec\for lever is in \fhe “P” (Park) posi\fion
(Au\foma\fic \fransmission/Con\finuously Variable
Transmission model) .
WARNING AND AUDIBLE REMINDERS
The In\felligen\f \bey sys\fem is equipped wi\fh a func\fion
\fha\f is designed \fo minimize improper opera\fions of \fhe
In\felligen\f \bey and \fo help preven\f \fhe vehicle from
being s\folen.
Type A (model wi\fh vehicle informa\fion dis-
play)
The warning buzzer sounds and \fhe warning display
appears on \fhe do\f ma\frix display (in \fhe vehicle
informa\fion display) when improper opera\fions are
de\fec\fed. See \fhe \froubleshoo\fing guide on \fhe nex\f
page. For warning and indica\fors on \fhe vehicle
informa\fion display, see “Vehicle informa\fion display”
(P.2-20) .
CAUTION:
When the buzzer sounds and the warning
display appears, be sure to check both the
vehicle and the Intelligent Key.
Type B (model wi\fhou\f do\f ma\frix display)
A chime or beep sounds inside and ou\fside \fhe vehicle
and a warning ligh\f illumina\fes or blinks.
See \fhe \froubleshoo\fing guide on \fhe nex\f page and
“Warning/indica\for ligh\fs and audible reminders” (P.2-
12) .
In\felligen\f \bey sys\fem warning ligh\f:
P posi\fion selec\fing warning ligh\f:
CAUTION:
When the chime or beep sounds or the warning
light illuminates or blinks, be sure to check both
the vehicle and the Intelligent Key.
&RQGLWLRQ