diagram RENAULT SCENIC 2008 J84 / 2.G Engine And Peripherals - Starting Charging Workshop Manual

1Engine and peripherals
V1 MR-372-J84-16A000$TOC.mif
V1
16A
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from
which his vehicles are constructed."
V1
All rights reserved by Renault s.a.s.
Edition Anglaise
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault s.a.s.
© Renault s.a.s. 2008
STARTING - CHARGING
Scénic II ph 2
Fault finding – Role of components 16A - 2
Fault finding – Operating diagram 16A - 3
Fault finding – Features 16A - 4
Fault finding – Customer complaints 16A - 5
Fault finding – Fault finding charts 16A - 6
Fault finding – Tests 16A - 15

16A-3V1 MR-372-J84-16A000$020.mif
16A
Scénic II ph 2
STARTING - CHARGING FLOWCHART:
1- Battery, component code 107,
2- Starter, component code 163,
3- Alternator, component code 103,
4- Protection and Switching Unit, component code 1337
5- UCH, component code 645.
A. "High current" wiring
B. Serial connection for communication between the alternator and the UCH
C. Starter control line
D. Multiplex network
4
5D
C 1A
2
3B
STARTING - CHARGING
Fault finding – Operating diagram