fuses RENAULT SCENIC 2008 J84 / 2.G Engine And Peripherals - Starting Charging Workshop Manual

Page 16 of 21

16A-16V1 MR-372-J84-16A000$060.mif
STARTING - CHARGING
Fault finding – Tests16A
Scénic II ph 2
TEST 1 Alternator supply test
NOTESTest the condition of the battery (see 80A, Battery, Test 1 Battery check).
Measure the voltage at the battery terminals with the engine warm and running at idle speed for 2 minutes and
with all consumers switched off.
Voltage value?
Replace the alternator (see MR 370, Mechanical, 16A, Starting -
Charging, Alternator: Removal - Refitting).
Visually inspect the consequences (battery, corrosion, etc.).
With the engine idling, connect a current clamp to the alternator B+ wire, connection code BPDA, with all
consumers switched off.
Current < 5 ACurrent between 5 A and 35
ACurrent > 35 A
Replace the alternator (see
MR 370, Mechanical, 16A,
Starting - Charging,
Alternator: Removal -
Refitting).Keep the engine speed at
3000 rpm and still with no
consumers switched on.Check that there are no
electrical components
consuming an abnormal
amount of current.
Disconnect the fuses one by
one.
Value of measured current?
(i 1)
< 16 V
≥ 16 V
A