brakes RENAULT SCENIC 2011 J95 / 3.G Engine And Peripherals Workshop Manual

13B-134
AFTER REPAIRCarry out a road test followed by another check with the diagnostic tool.
V4 MR-372-J84-13B000$090.mif
DIESEL INJECTION
Fault finding – Interpretation of statuses13B
DDCR INJECTION
Vdiag No.: 44, 48
ET415
CONTINUED 3
STATUS 5
Cruise control or speed limiter monitoring
This status appears when the vehicle brakes or decelerates sharply without
the injection computer receiving a signal that the brake pedal switch has been
pressed.
If status ET415 is STATUS 5, consult the interpretation:
– of status ET042 Cruise control/Speed limiter,
– of status ET703 Cruise control - speed limiter buttons,
– of status ET704 Brake switch no. 1,
– and status ET705 Brake switch no. 2,
to test the cruise control/speed limiter system components and locate the faulty
component.
Also, check the operation of the accelerator pedal, and use the diagnostic tool to
check the presence of a fault connected with this component. Deal with them if
necessary.
Reinitialise status ET415 on the injection computer by running command
RZ001 Fault memory.
If status ET415 becomes STATUS 5, deal with the present faults or those stored in
the injection computer.
If the fault is still present, contact the Techline.