fuses RENAULT TWINGO 2009 2.G Electrical Equipment - Fuse Box Workshop Manual

81C-5
MR-413-X44-81C000$400_eng.mif
V1
81C
FUSE BOX
Fault finding chart
ALP 1 No + after ignition feed on component 1016
NOTESCheck fuses F1-30A, F2-15A, F3-15A, F3-15A, F4-7.5A, F5-15A, F6-15A,
F7-15A, F8-15A, F9-15A, F10-5A of component 1016 in addition to fuse MF-60A of
component 597.
During the test the vehicle should be on + after ignition feed.
Use a test light to check for + 12 V between fuse F1-30A of component 1016 and a chassis earth.
Is the test light lit?
NO YES
Test the continuity on connection A between
fuse F1-30A of component 1016 and component 104.Check fuse F1-30A.
Is the continuity correct? Is the fuse correct?
YES NO YES NO
Carry out a continuity test
between connection BP12
and connection A of
component 104.
Is the continuity correct?
YES NO
Use a test light to check for + 12 V between
connection BP12 of component 104 and a chassis
earth.
Is the test light lit?
YES NO
Replace the immobiliser
Fault on connection A.
Repair the wiring. If there
is a repair procedure
(see Technical Note
6015A, Repairing
electrical wiring,
Wiring: Precautions for
repair), repair the wiring,
otherwise replace it.Replace the passenger
compartment fuse box.Replace fuse F1-30A
of component 1016.
Replace the immobiliser.
MR-413-X44-81C000$400_eng.mif

81C-24
MR-413-X44-81C000$600_eng.mif
V1
FUSE BOX
Fault finding chart81C
ALP 19 No + accessories feed on component 1016
NOTESCheck fuses F27-5A, F28-30A, F29-15A, F30-10A, F31-10A of component 1016 in
addition to fuse MF-60A of component 597.
The + accessories feed must be activated during the various tests.
Use a test light to check for + 12 V between fuse F27-5A of component 1016 and a chassis earth.
Is the test light lit?
YES NO
Check fuses F27-5A, F28-30A,
F29-15A, F30-10A, F31-10A of component 1016.Carry out a continuity test on connection S between fuses
F27-5A, F28-30A, F29-15A, F30-10A, F31-10A of
component 1016.
Are the fuses sound? Is the continuity correct?
YES NO NO YES
Carry out a continuity
test on connection S
between fuses F27-5A,
F28-30A, F29-15A,
F30-10A, F31-10A of
components 1016
and 104.
Is the continuity correct?
YES NO
Carry out a continuity test between connection S and
connection BP12 of component 104.
Is the continuity correct?
YES NO
Replace the immobiliser.
Replace the
passenger
compartment fuse
box.Replace the faulty
fuses.Fault on connection BPDA.
Repair the wiring. If there is a
repair procedure (see
Technical Note 6015A,
Repairing electrical wiring,
Wiring: Precautions for
repair), repair the wiring,
otherwise replace it.
Fault on connection S. Repair the wiring. If there is a
repair procedure (see Technical Note 6015A,
Repairing electrical wiring, Wiring: Precautions for
repair), repair the wiring, otherwise replace it.