RENAULT TWINGO 2009 2.G Panelwork Owner's Manual

40A-16
GENERAL INFORMATION
Vehicle structure, front section: Description
40A
(9) Engine stand (see 41A, Front lower structure, Engine stand: Descrip-
tion, page 41A-21)
(10) Front left-hand wheel arch (see 42A, Front upper structure, Front wheel arch: Des-
cription, page 42A-22)
(11) Front half unit (see 41A, Front lower structure, Front half unit: Des-
cription, page 41A-24)
(12) Front right-hand wheel arch (see 42A, Front upper structure, Front wheel arch: Des-
cription, page 42A-22)
(13) Front wheel arch, front section (see 42A, Front upper structure, Front wheel arch: Des-
cription, page 42A-22) No. Description Classification Type Thickness
(mm)

40A-17
GENERAL INFORMATION
Vehicle structure, side section: Description
40A
SIDE STRUCTURE
120919
No. Description Classification Type Thickness
(mm)
(1) Roof drip moulding lining (see MR 400)HLE1.3
(2) Normal roof front cross member (see 45A, Top of body, Roof
front cross member: General
description, page 45A-8) Mild
steel1
(3) Roof rear cross member (see 45A, Top of body, Roof
rear cross member: General
description, page 45A-10) HLE1.2
(4) Sill pane stiffener (see 41C, Side lower structure, Sill panel stiffener: Des-
cription, page 41C-15)
(5) Sill panel reinforcement (see 41C, Side lower structure, Sill panel reinforce-
ment: Description, page 41C-13)
(6) A-pillar reinforcement (see 43A, Side upper structure, A-pillar reinforcement:
Description, page 43A-6)
(7) Sill panel closure panel (see 41C, Side lower structure, Sill panel closure panel:
Description, page 41C-10)

40A-18
GENERAL INFORMATION
Vehicle structure, side section: Description
40A
(8) B-pillar reinforcement (see 43A, Side upper structure, B-pillar reinforcement:
Description, page 43A-10)
(9) Windscreen pillar lining (see Windscreen pillar lining: Description)
(10) A-pillar (see 43A, Side upper structure, A-pillar: Description,
page 43A-2)
(11) Roof centre cross member (see Roof centre cross member: Description)
(12) Front section of roof (see 45A, To p of body, Roof front section: Description,
page 45A-6)
(13) Sill panel (see 41C, Side lower structure, Sill panel: Description,
page 41C-5)
(14) Roof (see 45A, Top of body, Roof: Description, page 45A-2)
(15) Upper body (see 43A, Side upper structure, Upper body: Descrip-
tion, page 43A-17)
(16) Rear section of roof (see 45A, Top of body, Roof rear section: Description,
page 45A-7) No. Description Classification Type Thickness
(mm)

40A-19
GENERAL INFORMATION
Vehicle structure, centre section: Description
40A
CENTRAL STRUCTURE
120918
No. Description Classification Type Thickness
(mm)
(1) Central floor reinforcement (see 41A, Front lower struc-
ture, Front side member, rear
section: Description, page 41A-
15) HLE1.5
(2) Front side member offset stiffener (see 41B, Centre lower struc-
ture, Centre floor, side section:
Description, page 41B-3) Ve r y
high
yield
strength2.5
(3) Windscreen aperture lower cross
member closure panel (see 42A, Front upper structure, Windscreen aperture
lower cross member closure panel: Description, page
42A-28)
(4) Centre floor, side section (see 41B, Centre lower structure, Centre floor, side
section: Description, page 41B-3)
(5) Front cross member under front seat (see 41B, Centre lower structure, Front cross member
under front seat: Description, page 41B-9)
(6) Rear cross member under front seat (see 41B, Centre lower structure, Rear cross member
under front seat: Description, page 41B-11)

40A-20
GENERAL INFORMATION
Vehicle structure, centre section: Description
40A
(7) Rear floor front cross member (see 41D, Rear lower structure, Rear floor front cross
member: Description, page 41D-12)
(8) Rear floor centre cross member (see 41D, Rear lower structure, Rear floor centre cross
member: Description, page 41D-14)
(9) Rear floor (see 41D, Rear lower structure, Rear floor: Description,
page 41D-1) No. Description Classification Type Thickness
(mm)

40A-21
GENERAL INFORMATION
Vehicle structure, rear section: Description
40A
REAR STRUCTURE
120917
No. Description Classification Type Thickness
(mm)
(1) Quarter panel rear upper stiffener (see MR 400)HLE1
(2) Rear end panel lining (see 44A, Rear upper structure,
Rear end panel assembly: Des-
cription, page 44A-22) Mild
steel0.95
(3) Rear wing panel (see 44A, Rear upper structure, Rear wing panel: Des-
cription, page 44A-2)
(4) Outer rear wheel arch (see 44A, Rear upper structure, Outer rear wheel arch:
Description, page 44A-10)
(5) Rear side member (see 41D, Rear lower structure, Rear side member:
Description, page 41D-8)
(6) Rear side member assembly (see 41D, Rear lower structure, Rear side member
assembly: Description, page 41D-5)
(7) Rear floor (see 41D, Rear lower structure, Rear floor: Description,
page 41D-1)
(8) Inner wheel arch (see 44A, Rear upper structure, Inner rear wheel arch:
Description, page 44A-14)

40A-22
GENERAL INFORMATION
Vehicle structure, rear section: Description
40A
(9) Rear light mounting (see 44A, Rear upper structure, Rear lights mounting:
Description, page 44A-6)
(10) Rear towing eye (see 41D, Rear lower structure, Rear towing eye: Des-
cription, page 41D-16)
(11) Quarter panel lining (see 44A, Rear upper structure, Quarter panel lining:
Description, page 44A-17)
(12) Rear end panel (see 44A, Rear upper structure, Rear end panel: Des-
cription, page 44A-25) No. Description Classification Type Thickness
(mm)

40A-23
GENERAL INFORMATION
Vehicle structure, removable section: Description
40A
REMOVABLE STRUCTURE
121745
No. Description Classification Type
(1) Radiator mounting cross member (see 41A, Front lower structure,
Radiator mounting cross mem-
ber: Removal - Refitting, page
41A-5) Steel
(2) Headlight carrier panel (see 42A, Front upper structure,
Headlight carrier panel: Remo-
val - Refitting, page 42A-11) Steel
(3) Front upper cross member (see 42A, Front upper structure,
Front upper cross member:
Removal - Refitting, page 42A-13) Steel
(4) Front wing (see 42A, Front upper structure,
Front wing: Removal - Refitting,
page 42A-3) Noryl
(5) Front wing mounting support (see 42A, Front upper structure,
Front wing upper mounting sup-
port: Removal - Refitting, page
42A-7) Steel

40A-24
GENERAL INFORMATION
Vehicle structure, removable section: Description
40A
(6) Bonnet (see 48A, Non-side opening ele-
ments, Bonnet: Removal - Refit-
ting, page 48A-1) Steel
(7) Dashboard cross member (see 42A, Front upper structure,
Dashboard c ross member:
Removal - Refitting, page 42A-26) Steel
(8) Front side door (see 47A, Side opening ele-
ments, Front side door: Removal
- Refitting, page 47A-1) Steel
(9) Offset rear floor, front section (see 41D, Rear lower structure,
Raised rear floor, front section:
Removal - Refitting, page 41D-4) Steel
(10) Filler neck (see Filler neck: Removal - Refit-
ting) (MR 411, 19C, Tank)Noryl
(11) Rear impact lower cross member (see 41D, Rear lower structure,
Rear impact lower cross mem-
ber: Removal - Refitting, page
41D-18) Steel
(12) Tailgate (see 48A, Non-side opening ele-
ments, Tailgate: Removal - Refit-
ting, page 48A-6) Steel
(13) Strut mounting reinforcement (see: MR 400, 40A, General infor-
mation)Steel No. Description Classification Type

40A-25
GENERAL INFORMATION
Structural components to be positioned on the repair bench: Description40A
I - PARTS REQUIRING THE USE OF A BODY JIG
BENCH
(1) Front wheel arch
(2) Front half-unit
(3) Engine mounting
(4) Subframe left-hand front mounting
(5) Front side member front section
(6) Rear side member rear section
(7) Rear side member
(8) Rear side member assembly
(9) Rear floor centre cross member
(10) Inner rear wheel archII - FRONT SUBFRAME REAR MOUNTING
121751
121747