Seat Ateca 2019 Owner's Manual

Driver assistance systems
After overtaking, the speed limiter can be
s wit
ched on with the pr
eviously set speed by
pressing button 3 on the turn signal lever in
the ar ea


 or by moving the third lever into
pressure point .
Switch the speed limiter off temporarily by
pressing down the accelerator (kick-
down)
If the accelerator is pressed right down (kick-
down) and the set speed is exceeded be-
cause driver wishes to do so, the limiter is
temporarily disabled.
To confirm it being switched off an acoustic
signal sound once. While the limiter is off, the
warning and control lamp

Driving
indication on the instrument panel display

Driver assistance systems
pressing the clutch, accelerator or moving
the wheel.

Driving
The Front Assist is active whenever the igni-
tion is s wit
ched on.
When the Fr
ont Assist is switched off, so too
are the advance warning function (pre warn-
ing) and the distance warning.
SEAT recommends leaving the Front Assist al-
ways switched on. Exceptions

Driver assistance systems
The following conditions may cause the
Fr ont Assist not t
o r
eact or to do so too
late:

Driving
and a warning tone will be heard

Driver assistance systems

Driving
The radar sensor

Driver assistance systems
Setting speed
T o set your speed, mo
v
e the third lever loca-
ted in position 1 upwards or downwards until
the desir ed speed is sho
wn on the instrument
panel displ

ay. The speed adjustment is made
at 10 km/h (6 mph) intervals.
Once you are driving, if you wish to set the
current speed as the vehicle

Driving