Seat Ateca 2020 Owner's Manual

Transport and practical equipment
LED on the power socket
Flashing green
light: The ignition is switched off, but
there is enough power av
ail
able
to continue supplying the socket
with current for a maximum of 10
minutes. If the connector is un-
plugged before this time elap-
ses, the socket is disconnected
and cannot be used again until
the ignition is switched on again.
Flashing red
light: There is an anomaly, e.g. dis-
connection due to a current
surge or o
v

erheating. Disconnection due to overheating
When the t
emper
atur
e e

xceeds a certain val-
ue, the 230 volt socket inverter is automati-
cally disconnected. The disconnection pre-
vents overheating when the power consump-
tion of the connected devices is excessive or
the ambient temperature is very high. The
230-volt power supply can be used once
again after a cooling time. First unplug the
connector of the connected device and then
plug it back in again. This prevents the elec-
trical device from being switched on again if
this is not wanted. WARNING
The electrical system is under high voltage!

Operation
Air conditioning
Heating, v entil
ation and
cooling
R el
at
ed video Fig. 152
Air conditioning Introduction
Depending on the vehicle

Air conditioning
available when the engine has reached its
normal running temperatur
e
.

Operation
Air distribution  /  / 
The airfl o
w adjusts aut omatically f
or comf
ort.
It can also be manually distributed to the de-
sired zone by pressing the corresponding
button:
The airflow is directed towards the chest
The airflow is directed towards the foot-
well.
The airflow is directed at the windscreen.
Maximum cooling power

Air conditioning
Manual air conditioning controls Fig. 154
In the centre console: Manual air condi-
tioning controls. Cooling mode 

Pr ess the butt on t
o s
witch on or off the cool-
ing system.
Temperature 1Turn the control to adjust the temperature.
Bl
o
w er

Operation
Operating the Climatronic through
the Easy Connect syst em*Fig. 155
Easy Connect screen: Climate control
menu. In the Easy Connect system it is also possible
t
o perf
orm various adjustments t
o the Clima-
tr
onic.
Open the air conditioner menu

Air conditioning

Operation

Air conditioning
For the sake of the environment
The seat heating should remain on only
when needed. Otherwise, it is an unneces-
sary fuel waste .Windscreen heating*
Fig. 156
Windscreen humidity and tempera-
t ur e sensor
. The heated windscreen is comprised of a set
of heat
ed wir
es placed betw
een the l
ayers of
the windscreen which, when electric current
is supplied to them, heat up and cause the
temperature of the glass to rise.
Its function is to assist the air-conditioning
system to prevent the windscreen from mist-
ing up or to demist it faster if it does mist up.
The system can be switched on manually or
automatically. Manual activation

Operation
Auxiliary heating (additional
heating)* Intr oduction The auxiliary heater runs on fuel from the ve-
hicle