reset Seat Exeo 2008 ADAGIO
Page 10 of 47
Operations: General information9
Operations: General informationSwitching on and off– Briefly press the ON/OFF button to switch the sound system on. 
You will then hear the audio source last used.
– Press and hold the ON/OFF button to switch the sound system  off.The sound system will come on automatically  when the ignition is switched 
on . It will also automatically switch off  when the ignition key is removed.
If the sound system is  switched on manually while the ignition key is 
removed, it will remain on for about 60 minutes.
If the sound system was  switched off manually, it will  not come on again auto-
matically when the ignition is switched on.Adjusting the volumeIncreasing and reducing the volume
– Turn the ON/OFF button clockwise or anti-clockwise.
Mute function
– Briefly press the ON/OFF button. The volume for the enabled  audio source will then be switched off. A crossed-out loud-
speaker symbol will appear in the display. Any CD media drives 
enabled will stop (pause function). – To restore the volume, briefly press the ON/OFF button or
– Turn the ON/OFF button clockwise.
When you switch on the system, exc
essive volume levels are reduced auto-
matically to a preset level  ⇒page 11.DisplayA screensaver is displayed if th e sound system is not used for 
around 30 seconds.The screensaver depends on the audio source selected. When screensaver is 
disabled when the sound system is in use. The screensaver is not disabled 
when adjusting the volume or using the mute function.
Fig. 2  Screensaver 
(example: in CD mode)
Adagio_EN  Seite 9  Dienstag, 7. Oktober 2008  10:55 10 
Page 12 of 47
Operations: General information11
– Press the button assigned to the option you want to adjust. A bar  will appear on the display.
– Turn the main control clockwise or anti-clockwise to adjust the  tone or volume distribution.
– Press the   button to exit th e menu. Your settings will be 
stored automatically.
GALA
GALA is the speed-dependent volume control function.– Press the   button. The setup menu will appear on the  display.
–Press the  GALA button.
– Turn the main control clockwise or anti-clockwise for the volume  to increase more or less when the speed is increased. The bar on 
the display indicates the adjustment made.
– Press the   button to exit the menu. Your settings will be  stored automatically.
Volume when system is switched on (VOL-ON)
When you switch on the system, excessive volume levels are 
reduced automatically to a preset level.– Press the   button. The setup menu will appear on the display.
– Press the  VOL-ON button.
– Turn the main control clockwise or anti-clockwise to set the  maximum ON volume.
– Press the   button to exit the menu. Your settings will be  stored automatically.
TONEMENUMENU
MENUMENU
Adagio_EN  Seite 11  Dienstag, 7. Oktober 2008  10:55 10 
Page 20 of 47
Media drives19
•
Make sure that the iPod is fixed in place with one of the adapters 
supplied.Note
•
Your Dealer also offers appropriate adapters for iPods that are not latest 
generation.
•
For further information on adapter adaptation, please see the information 
enclosed with the  adapters supplied.
Inserting the iPod into the iPod interface– Switch on the sound system  ⇒page 9.
– With the display facing upwards and the contact towards the  front, slide the iPod into the bay until you hear it engage. The 
iPod will switch on automatically and the battery will be charged.
– If the sound system does not detect the iPod after you insert it,  please “reset” the iPod (refer to the iPod operating instructions).To start the iPod, press the   button several times  ⇒page 19.
The iPod is switched off automatically  when you switch off the sound system 
or the ignition.
Note
•
To ensure optimum sound quality, you should enable the “sound check” 
setting on the iPod and disable the “EQ” (equaliser) before inserting the iPod 
(please refer to the iPod operating instructions).
•
Slight scoring marks may occur on the iPod when used with the adapter.
Functions
The iPod is operated just like an external CD changer using 
the controls on your car's sound system.To start the iPod, press the   button until the display shows CD positions 
CD 1  to CD 6  ⇒ page 24.
The following functions are available:•
Play all tracks stored on the iPod
•
Select and play up to five playlists (just like selecting CD 1 to 5 on an 
external CD changer)
•
Change between playlists (just like changing the CD on an external CD 
changer)
•
Change tracks within a playlist
•
Fast forward and rewind within a track
•
Play tracks in shuffle mode ("mix")
•
SCAN function
For further information on operation, please refer to the “CD” chapter 
⇒ page 24.
NotesHere are some tips and points to remember when using the iPod in the car:•
Track numbers appear with a maximum of two digits in the sound system 
display. The first digit is suppressed if you select a track with a three-digit 
number, i.e. track 125 and track 25 are both displayed as track “25”. For this 
reason we do not recommend allocating mo re than 99 tracks to each playlist.
•
If you reach the end of a playlist when selecting a track directly 
(forward/reverse), the count is resumed at track “1”.
CD
CD
Adagio_EN  Seite 19  Dienstag, 7. Oktober 2008  10:55 10