lights Seat Ibiza 2018 User Guide

Lights and visibility
WARNING
Closing the sunroof without the anti-trap
function can cause serious injuries.

Operation
Automatic dipped beam control  
* The automatic dipped beam control is merely
intended as an aid and is not abl
e t
o recog-
nise all driving situations.
When the light switch is in position , the
vehicle lights and the instrument panel and
switch lighting switch on and off automatical-
ly in the following situations

Lights and visibility
Switching on the rear fog light (vehicles
with fr ont f
og lights)

Operation
The Leaving Home function is controlled with
a phot osensor
.
If the Coming Home or L
eaving Home func-
tion is connected, the front side and dipped
lights, the tail lights and the number plate
light will light up to provide assistance.
Coming Home function
The Coming Home function is activated by
switching off the ignition. When the driver
door is opened, the Coming Home lighting
comes on.
The Coming Home lighting switches off in the
following cases:

Lights and visibility
Driving abroad The light beam of the dipped beam lights is
asymmetric: the side of the road on which
you ar e driving is lit mor
e intensely.
When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as “Tourist light”.
The light distribution of the halogen and full-
LED headlights allows the specific “tourist
light” values to be met without the need for
stickers or changes in the settings. Note
“Tourist light” is only allowed temporarily. If
you are pl anning a l

ong stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights. Headlight range control
Fig. 145
Instrument panel: headlight range
contr ol. The lights range control adapts according to
the v
alue of the headlight beam and the v
ehi-
cl

e load status. This offers the driver optimum
visibility and the headlights do not dazzle on-
coming drivers

Operation
If your vehicle breaks down:
1. Park your vehicle at a safe distance from mo ving tr
affic.
2.
Press the button to switch on the hazard
warning lights

Lights and visibility
It will be switched on at full brightness when
the doors ar e opened and the lights will be
dimmed during driving, when the light sel ec-
t
or is in ,  or .
The brightness of the ambient light* can be
adjusted through the Easy Connect menu, as
can colour, in versions with lighting on the
front door panel (the  /  butt
on and the
function butt on

SETTINGS ! background
lighting

Lights and visibility
Interior mirror with automatic anti-dazzle
function*
The anti-dazzl e function is activ
at
ed every
time the ignition is switched on.
When the anti-dazzle function is enabled, the
interior rear vision mirror will darken auto-
matically according to the amount of light it
receives. The anti-dazzle function is cancel-
led if reverse gear is engaged. Note

Start and driving
Braking and stability sys-
t ems
Contr ol l
amps 
It lights up
Fault in the ESC or disconnection caused by the sys-
tem.
As the ESC operat

es in conjunction with the ABS, the
ESC light will also come on if a fault should occur in
the ABS. 
Flashes
ESC or ASR activated. Y
It lights up
Fault in the ASR or disconnection caused by the sys-
tem. Y
Flashes
ASR working. 
It lights up
ASR manually deactivated.
Or: ESC in Sport mode. 
It lights up

Start and driving
vehicle to a specialised workshop as soon as
possibl e
.
If ther
e is a fault in the ABS, the ESC* and the
tyre pressure control lamp will also light up.
Brake system fault
If the ABS warning lamp  lights up together with the brake warning lamp , there is a
fault in the ABS function and in the brake sys-
tem