light Seat Ibiza 2018 Owner's Guide

Page 147 of 360

Lights and visibility
Driving abroad The light beam of the dipped beam lights is
asymmetric: the side of the road on which
you ar e driving is lit mor
e intensely.
When a car that is manufactured in a country
that drives on the right travels to a country
that drives on the left (or vice versa), it is nor-
mally necessary to cover part of the head-
light bulbs with stickers or to change the ad-
justment of the headlights to avoid dazzling
other drivers.
In such cases, the regulations specify certain
light values that must be complied with for
designated points of the light distribution. This
is known as “Tourist light”.
The light distribution of the halogen and full-
LED headlights allows the specific “tourist
light” values to be met without the need for
stickers or changes in the settings. Note
“Tourist light” is only allowed temporarily. If
you are pl anning a l

ong stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights. Headlight range control
Fig. 145
Instrument panel: headlight range
contr ol. The lights range control adapts according to
the v
alue of the headlight beam and the v
ehi-
cl

e load status. This offers the driver optimum
visibility and the headlights do not dazzle on-
coming drivers

Page 148 of 360

Operation
If your vehicle breaks down:
1. Park your vehicle at a safe distance from mo ving tr
affic.
2.
Press the button to switch on the hazard
warning lights

Page 149 of 360

Lights and visibility
It will be switched on at full brightness when
the doors ar e opened and the lights will be
dimmed during driving, when the light sel ec-
t
or is in ,  or .
The brightness of the ambient light* can be
adjusted through the Easy Connect menu, as
can colour, in versions with lighting on the
front door panel (the  /  butt
on and the
function butt on

SETTINGS ! background
lighting

Page 151 of 360

Lights and visibility
Interior mirror with automatic anti-dazzle
function*
The anti-dazzl e function is activ
at
ed every
time the ignition is switched on.
When the anti-dazzle function is enabled, the
interior rear vision mirror will darken auto-
matically according to the amount of light it
receives. The anti-dazzle function is cancel-
led if reverse gear is engaged. Note


Page 159 of 360

Transport and practical equipment
Electrical power socket Fig. 160
Front power socket. The 12 Volt cigarette lighter power socket can
al
so be used f
or other el
ectrical components
with a power rating of up to 120 Watt. When
the engine is switched off, however, the vehi-
cle battery will discharge. For further informa-
tion see

Page 181 of 360

Introduction
Overview of screen and function buttons Display and function buttons: operation
and effect
A The title bar shows the selected menu
and, where applicabl
e
, other function
buttons.
B Press it to open another menu.
C The scroll bar is shown on the right and its
size depends on the entries in the list.
Mo
v

e the bar on the screen by pressing
lightly and without lifting the finger, see

Page 231 of 360

Start and driving
Braking and stability sys-
t ems
Contr ol l
amps 
It lights up
Fault in the ESC or disconnection caused by the sys-
tem.
As the ESC operat

es in conjunction with the ABS, the
ESC light will also come on if a fault should occur in
the ABS. 
Flashes
ESC or ASR activated. Y
It lights up
Fault in the ASR or disconnection caused by the sys-
tem. Y
Flashes
ASR working. 
It lights up
ASR manually deactivated.
Or: ESC in Sport mode. 
It lights up

Page 235 of 360

Start and driving
vehicle to a specialised workshop as soon as
possibl e
.
If ther
e is a fault in the ABS, the ESC* and the
tyre pressure control lamp will also light up.
Brake system fault
If the ABS warning lamp  lights up together with the brake warning lamp , there is a
fault in the ABS function and in the brake sys-
tem

Page 245 of 360

Start and driving
Emergency program A backup programme is in place if a fault
should occur in the contr
ol syst
em.
If all the positions of the selector lever are
shown over a light background on the instru-
ment panel display, there is a system fault
and the automatic gearbox will operate in
with the backup programme. When the back-
up programme is activated, it is possible to
drive the vehicle, however, at low speeds and
within a selected range of gears. In some ca-
ses driving in reverse gear may not be pos-
sible. CAUTION
If the gearbox operates with the backup
progr amme

, take the vehicle to a special-
ised workshop and have the fault repaired
without delay. Indications on the instrument panel
displ
ay Clutch

Page 251 of 360

Start and driving

It lights up
Fault in the management of the petrol engine.
Have the engine check ed by a specialised w
orkshop
as soon as possible.
The warning lamp  (Electronic P
ower Control)
lights up when the ignition is switched on while sys-
tem operation is being verified. It should go out once
the engine is started. 
It lights up
Diesel engine glow plug system.
The engine glo w plug syst

em has been activated.
The engine can be started straight away when the
lamp switches off. 
Flashes
Fault in the management of the diesel engine.
Have the engine check ed by a specialised w

orkshop
as soon as possible. Note
While the control lamps are on , ;, 
or  there might be f aults in the engine

,
fuel consumption may go up and the en-
gine might lose power. Catalytic converter
To maintain the useful life of the catalytic
conver
t

er


Page:   < prev 1-10 11-20 21-30 31-40 41-50 next >