ECO mode Seat Ibiza 2020 Owner's manual

Page 2 of 325

SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,
that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason no
right at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for error or
omission, the information included in the current handbook is valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the “Copyright” Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.11.20
Vehicle identification da a
Model:
Vehicle Registration:
Vehicle identification
number:
Date of vehicle registration
or vehicle delivery:
SEAT Official Service:
Service advisor:
Telephone:
Confirmation of eceipt of documentation
and vehicle keys
The following items were delivered
with the vehicle: YES
NO
On-board documentation
First key
Second key
Correct working order of all keys was
checked
Location:





Date:
Signature of owner:

Page 8 of 325

Table of Contents
Automatic gearbox/DSG automatic gear-
bo x* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
199
Gear
-change recommendation . . . . . . . . . . . . 205
Steering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206
SEAT Drive Profiles* . . . . . . . . . . . . . . . . . . . . . . . . 207
Driving tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 208
Driver assistance systems . . . . . . . . . . . . . . . . 211
General notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211
Drive assist sensors and cameras . . . . . . . . . . 212
Cruise control system (CCS)* . . . . . . . . . . . . . . 213
Speed limiter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 216
Emergency brake assistance system (Front
Assist)* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 219
ACC - Adaptive Cruise Control* . . . . . . . . . . . 222
Braking and parking . . . . . . . . . . . . . . . . . . . . . . . 228
Braking system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 228
Stabilisation and brake assistance sys-
tems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231
P

arking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233
Help with parking and manoeuvring . . . . . 234
Parking aid parking and manoeuvring
(ParkPil
ot)* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234
Parking System Plus* . . . . . . . . . . . . . . . . . . . . . . . 236
Rear parking aid* . . . . . . . . . . . . . . . . . . . . . . . . . . 238
Reverse Assist (Rear View Camera)* . . . . . . . 239
Towing bracket device* . . . . . . . . . . . . . . . . . . . 241
Trailer mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241
Towing bracket device* . . . . . . . . . . . . . . . . . . . . 248
Retrofitting a towing bracket . . . . . . . . . . . . . . . 254
Practical tips . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Checking and refilling levels . . . . . . . . . . . . . 255
Refuelling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 255
Fuel types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 257
AdBlue® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 260Engine management and emissions control
system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 262
Engine compartment . . . . . . . . . . . . . . . . . . . . . . . 264
Engine oil . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 266
Cooling syst

em . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269
Brake fluid . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 271
Windscreen washer reservoir . . . . . . . . . . . . . . . 272
12-volt battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 273
Wheels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Wheels and tyres . . . . . . . . . . . . . . . . . . . . . . . . . . . 276
Tyre pressure loss indicator* . . . . . . . . . . . . . . . 282
Spare wheel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 284
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286 SEAT Maintenance Programme . . . . . . . . . .
286
Service intervals . . . . . . . . . . . . . . . . . . . . . . . . . . . . 286
Additional service offers . . . . . . . . . . . . . . . . . . . . 288
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 289
Vehicle maintenance . . . . . . . . . . . . . . . . . . . . . 289
Maintenance and cleaning . . . . . . . . . . . . . . . . . 289
Accessories and modifications to the ve-
hicle
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 294
Accessories, spare parts and repair work . . . 294
Information for the user . . . . . . . . . . . . . . 297
Information for the user . . . . . . . . . . . . . . . . . . . 297
Information stored by the control units . . . . . . 297
Other important information . . . . . . . . . . . . . . . . 297
Information about the EU Directive
2014/53/EU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 298
Technical data . . . . . . . . . . . . . . . . . . . . . . . . . 302 Indications about the technical data . . . . 302
Important information . . . . . . . . . . . . . . . . . . . . . . 302
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 309
6

Page 32 of 325

Safety
Child seats that have been tested and ap-
pr o
ved under the ECE R44 or ECE-R129
standards bear the ECE-R44 or ECE-R129
test marks on the seat (the letter E in a circle
with the test number below it).
Follow the manufacturer's instructions and
observe any statutory requirements when in-
stalling and using child seats.
We recommend you to always include the
manufacturer's Child Seat Instruction Manual
together with the on-board documentation.
SEAT recommends you use child seats from
the Original Accessories Catalogue. These
child seats have been designed and tested
for use in SEAT vehicles. You can find the right
child seat for your model and age group at
SEAT dealers.
Child seats by approval category
Child seats may have the approval category
of universal, semi-universal, vehicle specific
(all according to the ECE-R44 standard) or i-
Size (according to the ECE-R129 standard).


Page 123 of 325

Lights
Note
“Tourist light” is only allowed temporarily. If
you ar e pl
anning a long stay in a country
that drives on the other side, you should
take the vehicle to an Authorised Technical
Service to change the headlights. Interior lights
Lighting of the instrument panel ,
displ

ays and switches Depending on the model, the lighting of the
instrument clust
er and s

witches can be ad-
justed in the infotainment system, using the
button    ! SETT,NGS ! Light !
,nterior lighting
››› page 90
.
With the ignition on and without light activa-
tion, the analogue instrument panel lighting
remains activated in daytime light conditions.
The lighting is reduced as the exterior light di-
minishes. In some cases, e.g. when driving
through a tunnel without the  function ac- tive, the instrument panel lighting may even
switch off. The objective of this function is to
provide the driver with a visual indication that
he or she should activate the dipped beam.
If your vehicle is equipped with a digital in-
strument panel (Digital SEAT Cockpit), the following message will appear
Turn on the
lights on the instrument panel.
Interior and reading lights Fig. 103
Detail of roof lining: front lighting of
the passenger compartment. Knob Function
 Turns off the interior lights.
 Turning the interior lights on or off.
 The interior lights come on automati-
cally when you unl
ock the v

ehicle,
open a door or remove the key from
the ignition.
The light goes out a few seconds after
closing all the doors, when locking the
vehicle or connecting the ignition.
* /
 Turning the reading light on and off The light controls may vary depending on the
v
ehicl

e version.
Luggage compartment lighting
The light is activated when the rear lid is
open, even when the ignition and lights are
turned off. For this reason, ensure that the
rear lid is always closed.
Ambient light*
The ambient light lights up the area of the
centre console and the footwell area and,
depending on the version, the front door pan-
els as well.
It will be switched on at full brightness when
the doors are opened and the lights will be
dimmed during driving, when the light selec-
tor is set to ,  or .
The intensity of the background light can be
adjusted through the infotainment system
menu. The colour can also be changed in
versions with lighting on the front door panel
(button    ! SETT,NGS ! Back-
ground lighting
››› page 86
). Note
If not all the vehicle doors are closed, the
int erior lights will be s

witched off after ap-
prox. 10 minutes, providing the ignition key
has been removed and the courtesy light
position selected. This prevents the battery
from discharging. 121

Page 171 of 325

Infotainment operation
Infotainment operation V oice contr
ol*
Introduction The voice control works both online* and off-
line t
aking int

o account what is indicated in
page 169, Languages available depend-
ing on the market. In online* mode, com-
mands are recorded more accurately, as
more data is available.
Voice control understands questions and ex-
pressions without having to learn commands.
Commands can be formulated freely and
can be colloquial. You will find proposals for
commands in the infotainment system.
Functions are reduced in offline mode.
Loud noises inside or outside the vehicle can
cause malfunctions, as well as confusing
phrases and answers.
Languages available depending on the
market
Online* and offline: German, American Eng-
lish, British English, French, Italian, Spanish
and Czech. These languages have advanced
functions such as Online Commands, air con-
ditioning control, natural interaction, etc. The other languages of the infotainment sys-
t
em

do not offer Online Commands, air con-
ditioning control or natural interaction.
Requirements


Page 202 of 325

Driving
To put the lever in P or t ak
e it out of P , the
locking button must be pressed and held and
the brake pedal pressed simultaneously.
 – Reverse gear
Reverse gear must be engaged only when
the vehicle is stationary and the engine is
idling ››› .
T o mo

ve the lever to position R, the lock but-
ton must be pressed and held while pressing
the brake pedal at the same time. The reverse
lights come on when the lever is in the R posi-
tion with the ignition on.
 – Neutral
With the lever in this position, the gear is in
neutral.
Press the brake pedal to move the lever from
N to D/S when the vehicle is stationary or at
speeds below 3 km/h (2 mph) ››› .
 – P
ermanent f

orward drive position
The lever in the D/S position enables the
gears to be operated in normal mode (D) or
sport mode (S). To select Sport mode S,
move the lever backwards. Pushing the lever
again will select normal mode D. The selec-
ted driving mode is shown on the instrument
panel display.
In normal mode (D), the gearbox selects the
best gear ratio. This depends on the engine load, the road speed and the dynamic gear
control pr

ogramme (DCP).
Sport mode (S) should be selected for a
sporty driving style. This setting makes use of
the engine's maximum power output. When
accelerating the gear shifts will be noticea-
ble.
Under certain circumstances (e.g. on moun-
tain roads) it can be advantageous to switch
tiptronic mode ››› page 201
, to adapt the
gears to suit the road conditions.
Selector lever lock
In P or N, the lever lock prevents a gear range
from being engaged, and prevents the vehi-
cle from moving off accidentally.
To release the gear lever lock, press and hold
the brake pedal with the ignition on. At the
same time, press the lever lock in the direc-
tion of the arrow ››› Fig. 141
.
As a reminder to the driver, when the lever is
in positions P or N the following indication will
be shown on the screen: When stationary, apply footbrake
while selecting a gear.
The lever is not locked if it is moved quickly
through position N (e.g. when shifting from R
to D). This makes it possible, for instance, to
“rock the vehicle backwards and forwards” if
it is stuck in snow or mud. The lever lock en-
gages automatically if the brake pedal is not pressed and the lever is in position N for mor
e
than about one second at a speed of less
than 5 km/h (3 mph).
Safety interlock for ignition key
Once the ignition has been turned off, the key
may be removed only if the gear selector is in
position P. While the key is not in the ignition,
the selector lever is locked in position P. WARNING


Page 206 of 325

Driving
for fuel) facilitates improved fuel consumption
and emission bal ance
.
If the vehicle has SEAT Drive Profile
››› page 207, the inertia mode can be activa-
ted in the Normal, Eco and Individual pro-
files. In the Eco profile, it is activated whenev-
er the operating conditions are met, regard-
less of how smoothly you remove your foot
from the accelerator. WARNING


Page 209 of 325

Start and driving
SEAT Drive Profiles* Intr oduction The SEAT Drive Profile enables the driver to
choose betw
een the Eco, Normal, Sport and
,ndividual pr
ofiles, which modify the be-
haviour of several vehicle functions, providing
different driving experiences.
The ,ndividual profile can be configured
according to personal preferences. The other
profiles have a fixed configuration.
Description Depending on the equipment fitted in the ve-
hicl
e

, SEAT Drive Profile can operate on the
following functions:
Engine
Depending on the profile selected, the engine
responds more quickly or smoothly to the ac-
celerator being pressed. When the Eco profile
is selected, the Start-stop function is activa-
ted.
In vehicles with automatic transmission, the
gear change timing is changed to put the
changes at higher or lower revolutions. The
Eco profile activates the Inertia function,
thereby reducing consumption. The rest of
the driving profiles will activate the inertia use function when the selector lever is not in the S
position, depending on how the accel

erator
pedal is released ››› page 203
. When the ve-
hicle is turned on again, the function is activa-
ted by default to reduce consumption.
With manual transmission, the Eco profile
changes the gear change recommendations
to facilitate more efficient driving.
“Dual Ride” suspension*
The “Dual Ride” suspension sets the suspen-
sion to comfortable in the Eco and Normal
profiles, and to sport in the Sport profile. In
the ,ndividual profile the suspension can
be switched between Normal or Sport, de-
pending on personal preference.
In the event of a fault in the “Dual Ride” sus-
pension, the following message is displayed
on the instrument panel screen Fault
shock absorber regulation .
Steering
Power steering becomes harder in the Sport profile to enable a sportier driving style.
Air conditioning
In vehicles with Climatronic, this can operate
in the Eco profile, especially restricting fuel
consumption. Adaptive Cruise Control (ACC)*
The ACC’s accel
eration and braking mode
varies according to the driving profile
››› page 222.
Setting the driving profile Fig. 145
Next to the gear lever: MODE button. You can select from Normal
, Sport, Eco and
,ndividual .
Y ou can sel

ect the required profile either by
repeatedly pressing the selection button
››› Fig. 145, or by using the touch screen, in
the menu that opens when the aforemen-
tioned button is pressed.
An icon on the touch screen provides infor-
mation about the active profile.
The illumination of the button

Page 211 of 325

Start and driving
Economical and environmentally
friendly driving Fuel consumption, environmental pollution
and w
ear t
o the engine, brakes and tyres all
depend largely on driving style. Consumption
can be reduced between 10-15% with an effi-
cient driving type. The following section gives
you some tips on lessening the impact on the
environment and reducing your operating
costs at the same time.
Active cylinder management (ACT®)*
Depending on vehicle equipment, the active
cylinder management (ACT®) may deacti-
vate some of the engine cylinders if the driv-
ing situation does not require too much pow-
er.
Foresight when driving
If you think ahead when driving, you will need
to brake less and thus accelerate less. Take
advantage of the inertia of the vehicle when-
ever possible, with a gear engaged. This
takes advantage of the engine braking effect,
reducing wear on the brakes and tyres. Emis-
sions and fuel consumption will drop to zero.
Changing gear to save energy
An effective way of saving is to change in ad-
vance to a higher gear. Manual transmission: shift up fr
om first t
o
second gear as soon as possible. Choosing
the right gear enables fuel savings. Select the
highest possible gear appropriate for the
driving situation (the engine should continue
functioning with cyclical regularity).
Automatic transmission: accelerate gradu-
ally and without reaching the “kick-down”
position.
Avoid driving at high speed
Avoid travelling at your vehicle’s top speed,
whenever possible. Fuel consumption, emis-
sion of harmful gases and noise pollution
multiply as speed is increased. Driving at
moderate speeds will help to save fuel.
Reduce idling time
In vehicles with the Start-Stop system idling is
automatically reduced. In vehicles without
the Start-Stop system it is worth switching off
the engine, for example, at level crossings
and at traffic lights that remain red for long
periods of time. When an engine has reached
operating temperature, and depending on
the cylinder capacity, keeping it switched off
for a minimum of about 5 seconds already
saves more than the amount of fuel necessa-
ry for restarting.
The engine takes a long time to warm up
when it is idling. Mechanical wear and pollu-
tant emissions are also especially high during this initial warm-up phase. It is therefore best
to driv
e off immediately after starting the en-
gine. Avoid running the engine at high speed.
Regular maintenance
Regular servicing helps in saving fuel even
before the engine is started. A well-serviced
engine gives you the benefit of improved fuel
efficiency as well as maximum reliability and
an enhanced resale value. A badly serviced
engine can consume up to 10% more fuel
than necessary.
Avoid short journeys
The engine and catalytic converter need to
reach their optimal operating temperature
in order to minimise fuel consumption and
emissions.
A cold engine consumes a disproportionate
amount of fuel. The engine reaches its work-
ing temperature after about four kilometres
(2.5 miles), when fuel consumption will return
to a normal level.
Check tyre pressure
Always make sure the tyres are inflated to the
correct pressures ››› page 278
to save fuel. If
the pressure is below half bar, fuel consump-
tion may increase by 5%. Due to the greater
rolling resistance, under-inflation also increa-
ses tyre wear and impairs handling. »
209

Page 260 of 325

Practical tips
Natural gas: “CNG” means Compr essed
N atural Gas.
Type of petrol  V
alid for: vehicles with petrol engines
The corr
ect grade of petrol is listed inside the
fuel tank flap.
The vehicle is equipped with a catalytic con-
verter and must only be run on unleaded
petrol. The petrol must comply with the
standard EN 228 and be sulphur-free. Fuels
with a 10% ethanol ratio can be refuelled
(E10) 1)
. The types of petrol are differentiated
by using the octane numbers (RON) or via
the anti-knock index (AKI).
Super unleaded petrol 95 octane petrol or
normal 91 octane petrol at least
We recommend refuelling with super 95 oc-
tane petrol (91 AKI). If not available, normal 91
octane petrol (87 AKI) (with a slight power
loss) may be used.
Super unleaded petrol, 95 octanes at
least
You should use super 95 octane petrol (91
AKI) at least. 3 If super is not available, if necessary, use nor
-
mal 91 oct
ane petrol (87 AKI). In this case only
use moderate engine speeds and a light
throttle. Refuel with super as soon as possi-
ble.
Unleaded super plus 98 octane petrol or
super 95 octane petrol at least
We recommend refuelling with super plus 98
octane petrol (93 AKI). If not available: super
95 octane petrol (91 AKI) (with a slight power
loss).
If super is not available, if necessary, use nor-
mal 91 octane petrol (87 AKI). In this case only
use moderate engine speeds and a light
throttle. Refuel with super as soon as possi-
ble. CAUTION


Page:   1-10 11-20 next >