battery Seat Leon 2020 User Guide

Page 230 of 399

Driving
level. The rest is kept until the end of the
journey.
The Int elligent Hybrid
App allows the user to
save electrical energy until reaching home
(charging point) with just “one click”. If this
option is not selected, the maximum amount
of electrical energy will be consumed until
the selected destination is reached. If the
user has no active route, the function will offer
the activation of a predictive route and BMA
mode from the widget itself with just one
click.
Show the active operating mode
The operating mode active at any given time
is displayed on the instrument cluster display,
e.g. B. WARNING
Switching to a different operating mode
whil e driving can distr

act you from traffic
conditions and cause accidents. Note
Information about the operating mode that
is curr ently activ

e is displayed on the in-
strument cluster display, along with the
charge level of the high-voltage battery. Troubleshooting
@
The E-MODE oper
ating mode is not
av
ailable
The indicator lamp lights up in white.
The E-MODE operating mode N (driving in
electric mode) cannot be used temporarily
because one or more conditions are not met.


Page 310 of 399

Practical tips
Practical tips
High-v olt
age battery
Safety instructions Introduction  V
alid for: hybrid vehicles WARNING
The vehicle’s high-voltage network and the
high-v olt

age battery are hazardous and
can cause burns and other injuries, includ-
ing fatal electric shocks.


Page 311 of 399

High-voltage battery


Page 312 of 399

Practical tips
Incorrect handling of the high-voltage
batt ery can cause serious injuries or
death. Maint
enance work on the high-
voltage battery must only be performed
by specialized personnel with the corre-
sponding qualifications and training. Nev-
er modify the high-voltage battery. When
the high-voltage battery is open, ensure it
does not come into contact with water or
other liquids. Liquids may cause short cir-
cuits, electrical shocks and burns.
Conservation of the high-
volt
age battery
Conservation instructions  V
alid f
or: hybrid vehicles
Reliability and capacity of the high-volt-
age battery
Lithium ion batteries are subject to ageing
and wear and tear throughout their useful life
due to their physical and chemical charac-
teristics. Correct handling of the high-voltage
battery makes an essential contribution to
keeping it in a reliable state in the long term
and to achieving high battery capacity and
range. Therefore, it is extremely important to
respect the following conservation instruc-
tions for the high voltage battery. These 7 maintenance instructions are essential for
maint
aining the v

ehicle's value over time.
Please also observe the applicable SEAT
warranty conditions for the high-voltage bat-
tery.
Conservation instructions
SEAT recommends the following conserva-
tion instructions:


Page 313 of 399

High-voltage battery
Charging settings in the info-
t ainment syst
em
Battery Manager Menu  V
alid for: hybrid vehicles
The
Battery Manager allows you to set or
select departure times for the programmed
charging of the high-voltage battery and for
the vehicle’s electric heating and air condi-
tioning.
Open the Battery Manager menu


Page 315 of 399

High-voltage battery


Page 317 of 399

High-voltage battery
Charging process display  V
alid for: hybrid vehicles Fig. 211
Behind the cover of the battery charg-
ing sock et: char
ging process display Fig. 212
On the inside of the cover of the bat-
t ery char

ging socket: sticker with information
on the charging process display. An LED light on the charging socket
› ›

› Fig. 211 (arrow) shows the status of the
charging process.
A sticker on the battery charging cover pro-
vides information on the meaning of the LEDs
››› Fig. 212.
charging process displays:
Green LED ››› Fig. 212
:
Always on: Charge completed success-
fully.
Turn signals: The high-voltage battery is
charging.
1 2 Short flashes: Programmed charging is
activ
e

. The charging process has not yet
started.
Yellow LED ››› Fig. 212
:
Turn signals: The parking lock P has not
been enabled.
Always on: No electrical network has
been detected. Arrange an inspection of
the power supply and network. Seek pro-
fessional assistance.
Red LED ››› Fig. 212
:
Turn signals: Error in the charging system.
The charging process cannot start or has
paused.
Always on: The charging connector has
not been locked. Unplug the charging
connector and plug it back in to the
charging socket, making sure it is proper-
ly inserted. If the problem persists, check
the compatibility of the cable or ask a
professional for help.
Charging socket lighting
In the dark, the charging socket's side lighting
(white LED) can facilitate orientation in the
vehicle:
Ignition 

Page 319 of 399

High-voltage battery
Manual release of the charging connector
The pull er f
or the manual release is located
on the left hand side of the engine compart-
ment , above the charging socket ››› Fig. 213
.


Page 321 of 399

High-voltage battery
Charging cable for power sockets  V
alid for: hybrid vehicles Fig. 215
Charging cable for electrical sockets Fig. 216
On the charging cable for power
sock ets: Indicat
or lamps on the protection de-
vice. ›››
Fig. 2
16
:
Indicator lamp of the connector and the
power supply.
Control lamp of the protection device
1 2 Control lamp of the vehicle
F
ailur

e warning lamp
Charging cable information
Before using the charging cable, also follow
the instructions displayed on it and on the
rear of the protective device.
Protection device
The electronic protection device ››› Fig. 216
ensures that the charging connector does
not receive current until it is plugged in to the
vehicle's charging connector.
Self-check
When the charging cable is plugged into the
electrical socket, the protective device auto-
matically performs a self-test. During this
check, all warning and indicator lamps turn
on briefly and go out one after the other.
Upon completion, the operational status at
that time is displayed.
Operating displays
One or more indicator lamps ››› Fig. 216
1 ,
2 or
3 light up green.
3 4 Display

Page 333 of 399

Checking and refilling levels
Checking levels Fig. 223
Diagram for the location of the various el-
ements. From time to time, the levels of the different
fluids in the v
ehicl
e must be checked. Never
fill with incorrect fluids, otherwise serious
damage to the engine may be caused.
Coolant expansion tank ››› page 334
Engine oil level dipstick ››› page 333
Engine oil filler cap ››› page 333
Brake fluid reservoir ››› page 337
Battery 1)
››› page 338
1 2
3
4
5 Windscreen washer reservoir
› ›
› page 337 Note
The layout of parts may vary depending on
the engine . 6
Engine oil
Gener al not
es The engine comes with a special, multi-grade
oil that can be used all year r
ound.
Because the use of high-qualit

y oil is essen-
tial for the correct operation of the engine
and its long useful life, when topping up or
changing oil, use only those oils that comply
with VW standards. »1)
In plug-in hybrid vehicles (PHEV) the battery is
in the luggage compartment ››

› page 341
.
331

Page:   < prev 1-10 11-20 21-30 31-40 next >