lock Seat Leon 5D 2008 COMMUNICATION SYSTEM

Communication
12
Control commands
The control commands are used to carry out functions that have already been selected.
The control commands are used during or at the end of a dialogue to carry out
certain functions.
Possible commands
Dial number
A telephone number can be vocally specified to the system and then dialled.
– Press button to talk Ÿ page 6, fig. 1. Activation of the system
is confirmed by a tone.
– After the tone, say the command DIAL NUMBER.After this command the system will then request you to specify a telephone
number. A connection will then be established to the specified number. The
telephone number can be specified all at once, in blocks of digits (separated
by a brief pause), or as single digits. You can specify the digits from zero to
nine . After each block of digits you specify (separated by a brief pause) the
CommandEffect
DIALTelephone number already entered is dialled.
STOREA name is saved in the phonebook with its phone number
CANCELCancels a running dialogue.
REPEATThe specified name or all of the digits specified up to this point will be
repeated. The system will then give the cue <Please proceed> so that you can
specify additional digits or commands.
CORRECTIONThe specified name or the last entered block of digits will be deleted. The sys-
tem will then give the cue <Please proceed> so that you can specify additional
digits or commands.
DELETEAll specified digits will be deleted. The system will then give the cue <The
number has been deleted. Please, proceed> so that you can specify new digits
or commands.
AF

Communication
14
Redial
– Press button to talk Ÿpage 6, fig. 1 .
– After the tone, say the command REDIAL.After giving the command the last number dialled via the hands-free system
will be dialled again.
Example of the REDIAL command:
A running dialogue can be cancelled at any time by pressing button to
talk.
To store names in the phone book
You can store names and telephone numbers in the internal phone book.
– Press button to talk Ÿ page 6, fig. 1. The beep tone indicates
that the system is ready.
– After the tone, say the command STORE NUMBER.
After giving the command the system will request you to specify a name and
telephone number to store in the internal phone book. The telephone book can store 50 names and numbers. You can specify the digits from zero
to
nine .
The telephone number can be specified all at once, in blocks of digits (sepa-
rated by a brief pause), or as single digits. After each block of digits you
specify (separated by a brief pause) the system will repeat the digits. The
system can only recognise single digits (one, zero, two, five, etc.), and not
combinations of digits (e.g. ten, twenty-five).
Say STORE to store the entry in the phone book.
AF
CommandConditionMessageEffect
REDIALPhone switched on<The number is being dialled.>Dialogue
End of dialogue
AF
AF
CommandConditionMessageEffect
STORE NAMEPhone book is not full<The name, please?>Dialogue
COMPANY XYZ<Please repeat the name>Dialogue

Communication15
Controls and equipmentA running dialogue can be cancelled at any time by pressing button to
talk.
Note
•If the telephone number has more than 20 digits, the system will decline
and give the cue <The number is too long> .
•A Plus (+) can also be placed ahead of the 20 digits.
•Say the command delete or back to delete or correct the corresponding
block of digits.
•Say repeat to have all the digits that have been recognised up to that
point repeated.
•If two or more names sound alike, it is better to save the names including
the first name or some other distinguishing entry.
•A running dialogue can be cancelled at any time by pressing button to
talk.
•The phone book works only in conjunction with the hands-free voice
command system; the entries are not stored on the phone SIM card.
COMPANY XYZ<The number, please?>Dialogue
ZERO, ONE, TWO, THREE<Zero, one, two, three>Dialogue
FOUR, FIVE, SIX<Four, five, six>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
No command<Possible commands are: Store,
repeat, back, delete, or specify addi-
tional digits>Dialogue
STORE<The name has been saved.>Dialogue - The name COMPANY XYZ
with the telephone number 0123456
has been stored
End of dialogue
AF
AF

Communication27
Controls and equipment
Control commands
The control commands are used to ca rry out functions that have already been chosen.
The control commands are used during or at the end of a dialogue to carry out
certain functions.
Possible commands
Dial number
A telephone number can be vocally specified to the system and then dialled.
– Press the talk button Ÿpage 23, fig. 11 . Activation of the
system is confirmed by a tone.
– After the tone, say the command DIAL NUMBER.After this command the system will then request you to specify a telephone
number. A connection will then be established to the specified number. The
telephone number can be specified all at once, in blocks of digits (separated
by a brief pause), or as single digits. You can specify the digits from zero to
nine . After each block of digits you specify (separated by a brief pause) the
CommandEffect
DIALTelephone number already entered is dialled.
STOREA name is saved in the phonebook with its phone number
CANCELCancels a running dialogue.
REPEATThe specified name or all of the digits specified up to this point will be
repeated. The system will then give the cue <Please proceed> so that you can
specify additional digits or commands.
CORRECTIONThe specified name or the last entered block of digits will be deleted. The sys-
tem will then give the cue <Please proceed> so that you can specify additional
digits or commands.
DELETEAll specified digits will be deleted. The system will then give the cue <The
number has been deleted. Please, proceed> so that you can specify new digits
or commands.
AC

Communication29
Controls and equipment
Redial
– Press the talk button .
– After the tone, say the command REDIAL.After giving the command the last number dialled via the hands-free system
will be dialled again.
Example of the REDIAL command:
A running dialogue can be cancelled at any time by pressing the talk button Ÿ page 23, fig. 10 .
To store names in the phone book
You can store names and telephone numbers in the internal phone book.
– Press the talk button . The beep tone indicates that the system
is ready.
– After the tone, say the command STORE NAME.
After giving the command the system will request you to specify a name and
telephone number to store in the internal phone book. The telephone book can store 50 names and numbers. You can specify the digits from
zero to
nine .
The telephone number can be specified all at once, in blocks of digits (sepa-
rated by a brief pause), or as single digits. After each block of digits you
specify (separated by a brief pause) the system will repeat the digits. The
system can only recognise single digits (one, zero, two, five, etc.), and not
combinations of digits (e.g. ten, twenty-five).
Say STORE to store the entry in the phone book.
AC
CommandConditionMessageEffect
REDIALPhone switched on<The number is being dialled.>Dialogue
End of dialogue
AC
AC
CommandConditionMessageEffect
STORE NAMEPhone book is not full<The name, please?>Dialogue
COMPANY XYZ<Please repeat the name>Dialogue

Communication
30
A running dialogue can be cancelled at any time by pressing the talk button
Ÿ page 23, fig. 10 .
Note
•If the telephone number has more than 20 digits, the system will decline
and give the cue <The number is too long> .
•A Plus (+) can also be placed ahead of the 20 digits.
•Say the command delete or back to delete or correct the corresponding
block of digits.
•Say repeat to have all the digits that have been recognised up to that
point repeated.
•If two or more names sound alike, it is better to save the names including
the first name or some other distinguishing entry.
•A running dialogue can be cancelled at any time by pressing the talk
button .
•The phone book works only in conjunction with the hands-free voice
command system; the entries are not stored on the phone SIM card.
COMPANY XYZ<The number, please?>Dialogue
ZERO, ONE, TWO, THREE<Zero, one, two, three>Dialogue
FOUR, FIVE, SIX<Four, five, six>Dialogue
If no command is specified, the system responds after about 5 seconds with the next cue.
No command<Possible commands are: Store,
repeat, back, delete, or specify addi-
tional digits>Dialogue
STORE<The name has been saved.>Dialogue - The name COMPANY XYZ
with the telephone number 0123456
has been stored
End of dialogue
AC
AC