display Seat Leon Sportstourer 2019 Owner's Guide

Operating modes
Active TP function and station selection
T r
affic announcements ar e pl
ayed in Audio
mode
.
If a station without the TP function in FM mode
is selected, the radio tries to find stations with
this function in the background. If none are
found, it will be displayed half way up the left
hand side of the screen .
In AM mode or in Media mode, a traffic sta-
tion is automatically tuned in the background
as long as there is one available. Depending
on the situation this operation may take some
time.
Incoming traffic announcement
In Audio mode, traffic announcements are
played automatically when they are re-
ceived.
While the traffic announcement is playing, a
pop-up window is displayed and the radio
switches, if necessary, to the traffic informa-
tion station.
Media mode is interrupted and the volume is
set as adjusted

Operating modes
Display: Meaning
s b)
DAB not available. a)
Gracenote

Infotainment System
Function button or message: function or
meaning
 ... Calculated distance to destination.
 ... Estimated travelling time.
* ... Distance to the next stopover. Press on the destination to display the
function buttons
 Delete destination.
 St
arting r
oute guidance direct to the se-
l ected destination. The stages ar
e omit

-
ted.
 Opening the detailed view of the desti-
nation in question. Available function buttons
New desti-
nation Add a new destination.
Destina-
tions Adding a new destination from My
destinations .
Storing To store the created route in the route
memory.
Start Start route guidance.
Calculate To update the calculated distance and
estimated arrival time. a)
St op T

o stop active route guidance. b) Available function buttons
c Moving a stopover or a destination to
another position on the list. Press and
drag to mo v

e the destination. a)
Only displayed with route guidance activated and
when a destination has been added to the tour.
b) Only displ ayed with r

oute guidance activated.
Last destinations
List of last destinations.
My destinations

Operating modes
display on the map. Up to 10 categories can
be sel ect
ed.
Sel ecting a point of int
er
est on the mapFunction button: function
1 There are several points of interest in the area.
Press this symbol to open a list of points of in-
ter
est.
2 The only point of interest in this zone. Press the
symbol to open the detailed view of the point of
int

erest. Quick POI search
In the Navigation main menu, pr
ess the
POIs function button and the three main catego-
ries will appear
. Alt
ernativ ely, ent
er the name
of the point of int

erest to be searched using
the new destination keypad, or press Search nearby on the map

Infotainment System
Function button: function
POI : name of the point of interest (when only one
appears on the map).
Group of POIs : more points of interest (when you
press on the map on various POIs grouped to- gether).
F
AVOURITE : name of the favourite.
HOME ADDRESS : Home address.
Start route guidance : starts guidance directly.
Add stopover : only when you have an active route.
Search nearby : enters in the search menu, but only
for the area around the point sel ect

ed on the map.
Demo mode start (only when demo mode is active)
Map display
Fig. 222
Messages and function buttons on
the map displ ay. Function buttons and messages on the
map displ
ay.
T o activ
ate function butt

ons

Infotainment System
chooses which to display, and in what order,
by mo ving the finger v
ertically ov
er the dial
s.
Press the NEXT button to bring up the L
ap
timer 1)
menu that is described bel ow

Operating modes
Driving data Fig. 235
Driving data. The on-board computer has 3 memories.
They can be used t
o displ
ay: dist ance
, time
,
average speed, average consumption and
range.
1. Since start
Indication and storage of distance travelled
and consumption values between the ignition
being turned on and it being turned off.
2. Since refuelling
Display and storage of the values for the jour-
ney and the consumption. By refuelling, the
memory will be erased automatically.
3. Long-term
The memory records the values for a specific
number of partial trips, up to a total of 19 hours and 59 minutes or 99 hours and 59 mi-
nutes, or 1999.9 km (mi) or 9999 km (mi), de-
pending on the model of instrument panel.
When one of these values is reached (de-
pending on the version of the instrument pan-
el), the memory is aut

omatically deleted and
starts counting again from 0.
Ecotrainer Fig. 236
CAR Ecotrainer menu. Fig. 237
Driving style symbols. Open the ECOTRAINER Menu

Infotainment System
Display: Meaning

Driving
approximately two minutes in neutral be-
fore swit
ching it off
.Note
After the engine is switched off the radiator
f an may run on for up to 10 minut es, e

ven if
the ignition is switched off. It is also possi-
ble that the fan turns itself on once more if
the coolant temperature increases due to
the heat accumulated in the engine com-
partment or due to its prolonged exposure
to solar radiation. Electronic immobilizer
The electronic immobiliser prevents unau-
thorised persons fr
om driving the v
ehicle
.
Inside the k

ey there is a chip that deactivates
the electronic immobiliser automatically
when the key is inserted into the ignition.
The electronic immobiliser will be activated
again automatically as soon as you pull the
key out of the ignition lock. For vehicles with
the “Keyless Access” system, the key has to
be outside the vehicle.
If the following message is shown on the in-
strument panel display: SAFE , the vehicle
cannot be started.
The engine can only be started using a genu-
ine SEAT key with its correct code. Note
A perfect operation of the vehicle is ensur-
ed if genuine SEAT keys are used. Emergency starting function
Fig. 256
On the right of the steering column:
emer gency st art. If no valid key is detected inside the vehicle,
an emer
gency st
art-up will be r
equir

ed. The
relevant message will appear in the dash
panel display. This may happen when, for ex-
ample, the vehicle key battery is very low:

Start and driving
Gear change: selector lever in the
drive position!
This driv er message is displ
ayed when the
sel ect
or l
ever is not in the position P when the
driver door is opened. Additionally, a buzzing
sound is emitted. Put the selector lever in po-
sition P, otherwise the vehicle could roll away.
Ignition is switched on
This driver message is displayed and a buz-
zer is sounded when the driver door is
opened with the ignition switched on.
“My Beat” function For vehicles with a convenience key there is
the “My Beat” function. This f
eat
ure pr
o

vides
an additional indication of the vehicle ignition
system.
When entering the vehicle, the start button