display Seat Tarraco 2018 Owner's Guide

Driving
Safety distance warning
If the syst em det
ects a sit
uation of danger
because the vehicle is too close to the vehicle
ahead, it will warn the driver by means of an
indication on the instrument panel display

Driving
Trailer mode
When driving with tr ail
er the ACC contr
ols
less dynamically.
Overheated brakes
If the brakes overheat, for example after
abrupt braking or in long and steep slopes,
the ACC may be deactivated temporarily.
The relevant text message will appear in the
dash panel display. In this case, adaptive
cruise control cannot be activated.
Adaptive Cruise Control can be reactivated
once brake temperature has cooled suffi-
ciently. The message will disappear from the
instrument panel display. If the message ACC
not available remains on for quite a long
time it means that there is a fault. Contact a
specialised workshop. SEAT recommends vis-
iting a SEAT dealership. WARNING
If you do not heed the Press the brake
message, the v ehicl

e may initiate an invol-
untary movement and could crash into the
vehicle ahead. In any event, before driving
off, check that the road is clear. The radar
sensor may not detect obstacles on the
road. This could cause an accident and se-
rious injuries. If necessary, apply the brake. Lane Assist system*
Intr oduction Fig. 270
On the windscreen: field of vision of
the L ane Assist syst
em camer

a. Using the camera located in the windscreen,
the L
ane Assist syst
em det

ects the possible
lines dividing the lanes. When the vehicle in-
voluntarily approaches a dividing line it has
detected, the system notifies the driver with a
corrective steering movement. The purpose is
not only to warn the driver, but also to keep
the vehicle inside the lane. This movement
can be over-regulated at any time.
No warning is produced with the turn signals
activated, given that the Lane Assist system
understands that a lane change is required.
As soon as the ignition is switched on, the
lane departure function is automatically acti-
vated. Control lamp "
It lights up yellow
Lane Assist active but not available.
The system cannot accurat
ely recognise the lane.
Please see page 294, Lane Assist system is not avail-
able (the control lamp is lit up yellow). "
It lights up green
Lane Assist system active and available. Some control and warning lamps will light up
briefly when the ignition is s
wit
ched on t

o
check certain functions. They will switch off
after a few seconds. WARNING
Observe the safety warnings

Driver assistance systems
Indications on the instrument panel
displ ay Fig. 271
On the instrument panel display: Indi-
cation on the L ane Assist system displ
ay (ex-
ample 1). Fig. 272
On the instrument panel display: Indi-
cation on the L ane Assist syst
em displ

ay (ex-
ample 2). Status display
Fig. 27 1


: The system is active, but not
available, either because the minimum
speed has not been reached or because
the lane lines are not recognised.
Fig. 271 : The system is active and available, both lane lines are recognised.
The steering angle is not being correc-
ted at this moment.

Driver assistance systems
Using the blind spot detector (BSD)
with parking assist ant (RC
T
A)Activating and deactivating the blind spot
detect
or (BSD) with parking assist

ant
(RCTA)
The blind spot detector with parking assistant
can be switched on and off by accessing the
Assistance systems menu on the dash
panel display using the steering wheel con-
trols. If the vehicle is equipped with a multi-
function camera, it can also be accessed by
means of the driver assistance systems key
located on the main beam headlight lever.
Open the Assistants menu.

Driving
Selecting a parking mode Fig. 280
Overview of reduced displays for park-
ing modes:  Par all
el parking in reverse.  Per-
pendicular parking in reverse.  Perpendicular
parking forwards. Fig. 281
On the instrument panel display: dis-
play of the assist ed parking syst

em with de-
creased visibility. Selecting a parking mode with Park Assist
with prior st
ep in fr
ont of the space
Aft

er activating the Park Assist system and af-
ter detecting a parking space, the display on
the instrument panel proposes a parking
mode. The Park Assist system selects the
parking mode automatically. The selected mode is shown on the instrument panel dis-
play

Driving
Park with Park Assist Fig. 282
On the instrument panel display: per-
pendicular parking. 
Finding a parking space.
 Parking position.  Manoeuvring. Fig. 283
On the instrument panel display: paral-
lel parking. 

Finding a parking space.  Park-
ing position.  Manoeuvring. Key to Fig. 282 and Fig. 283:
Message t o mo
v

e forwards
Your vehicle
Parked vehicle
Parking space detected
Message to park
Message to press the brake pedal
Progress bar
1 2
3
4
5
6
7 Progress bars
The pr
ogr
ess bar

Driving
Exiting a parking space with Park
Assist (only f or par
all
el spaces)Fig. 284
On the instrument panel display:
driving off fr om perpendicul ar parking.Key to the Fig. 284:
Park
ed v

ehicle
Your vehicle in reverse gear
Progress bar to indicate the distance left
to cover
Message giving the proposed manoeuvre
to exit the parking space
Necessary conditions to exit a parking
space with Park Assist

Driver assistance systems
For parallel parking spaces
9. Go forward until the ParkPilot continuous sig-
nal is heard.
OR: go forw
ard until the instrument panel dis-
pl ay sho

ws the message to reverse.
The Park Assist system steers the vehicle for-
war d and back until it can e

xit the space.
10. The vehicle can exit the space when a corre-
sponding message is displayed on the instru-
ment panel and, in some cases, an acoustic
signal sounds.
T
ak

e charge of the steering with the turning
angle set by the P ark Assist syst

em.
11. Paying attention to the traffic, exit the parking
space. Automatic braking intervention by
P
ark Assist Park Assist helps the driver by automatically
br
aking in cert
ain sit

uations.
The driver is always responsible for braking in
time

Driving
Adjusting the display and audible
w arnings The settings for the display and audible
warnings ar
e contr
olled via the Easy
Connect*.
Automatic activation
 on

Driver assistance systems
Key to the Fig. 291:
Symbol Meaning
D Left camera area
 Exit the current display.
 Three-dimensional views
 Depending on the equipment: con-
necting and disconnecting the Park
-
Pil
ot sound.
 Adjust the display: bright, contrast
and colour
. The aerial view is generated by combining
the images fr
om all the camer
as L