Seat Tarraco 2020 Owner's manual

Transport and practical equipment
Transport and practical
equipment St oring ob
jects
Positioning the luggage and cargo It is possible to carry objects and luggage in
the v
ehicl

e, in a trailer ››› page 306
and on
the roof ››› page 148
. When doing so, please
consider all legal provisions.
Placing luggage inside the vehicle safely

Operation

Transport and practical equipment
WARNING
Animals, loose or unsecured or objects car-
ried on the r ear shelf can cause serious in-
jury in case of sudden manoeuvring or
br
aking or in case of an accident.

Operation
Placing the third row of seats in the
car go fl
oor position Fig. 121
Third row of seats: place in the cargo
fl oor position. Fig. 122
Third row of seats: lift the seat. The rear seats can be folded down separate-
ly t
o e

xtend the boot. Placing the third row of seats in loading
floor position

Transport and practical equipment

Operation
Adjust the height of the variable boot floor
Depending on the f eat
ures, the height of the
boot floor can be adjusted.

Transport and practical equipment

Operation
Bag hooks Fig. 128
In the luggage compartment: bag
hooks. There may be hooks for hanging bags on
both sides of the luggage compartment
› ›
› Fig. 128.
The retaining hooks have been designed to
secure light shopping bags. WARNING
Never use the hooks to hang luggage or
other ob jects. In case of sudden br

aking or
an accident, the hooks could break. CAUTION
Each hook is designed for a maximum load
of 2.5 k g. Trapdoor for long loads
Fig. 129
Backrest of the rear seat: opening the
tr apdoor f

or long loads Depending on the features, on the rear seat,
behind the centr
al armr

est, there is a tail-
board for transporting long items in the interi-
or, such as skis.
Opening the tailboard for long items

Transport and practical equipment
Net partition* Unf ol
ding and folding the net parti-
tion Fig. 130
Deploying the net partition. Fig. 131
Folding in the net partition. Before fitting the net partition in the vehicle it
must be unf
ol

ded. Fold out the net partition
Tak

e out the partition net from the corre-
sponding bag and unroll it.
Extend the cross rods ››› Fig. 130
1 and
2 of the net in the direction of the arrows until it
“clicks”.
F
ol

ding in the net partition

Operation