display Seat Tarraco 2020 User Guide

Operation
eliminate the cause. If necessary, seek pro-
f essional assist
ance.
Priority 2 warning (yellow)
The symbol lights up or flashes (in part ac-
companied by audible warnings). Operating
faults or the lack of operating fluids can
cause damage to the vehicle or a fault.
Check the faulty function as soon as possible.
If necessary, seek professional assistance.
Information message
It provides information about processes in the
vehicle.
Driver alert system (break recom-
mendation)* Fig. 56
On the instrument panel display: driver
al ert syst

em symbol. The Fatigue detection informs the driver when
their driving behaviour sho
ws signs of f

atigue.
Function and operation
Fatigue detection determines the driving be-
haviour of the driver when starting a journey,
making a calculation of tiredness. This is con-
stantly compared with the current driving be-
haviour. If the system detects that the driver is
tired, an audible warning is given with a
sound and an optic warning is shown with a
symbol and complementary message on the
instrument panel display ››› Fig. 56
. The mes-
sage on the instrument panel display is
shown for approximately 5 seconds, and de-
pending on the case, is repeated. The system
stores the last message displayed.
The message on the instrument panel display
can be switched off by pressing the  button
on the multi-function steering wheel
››› page 82.
The message can be recalled to the instru-
ment panel display using the multifunction
display ››› page 72
.
Conditions of operation
Driving behaviour is only calculated on
speeds above about 65 km/h (40 mph) up to
around 200 km/h (125 mph). Switching on and off
Fatigue det
ection can be activated or deacti-
vated in the infotainment system using the
function button  > Driver assistance >
Driver Alert System ››› page 90
. A mark in-
dicates that the adjustment has been activa-
ted.
System limitations
The Fatigue detection has certain limitations
inherent to the system. The following condi-
tions can limit the Fatigue detection or pre-
vent it from functioning.

Instruments and warning/control lamps
country in question for driving with a trailer,
the syst em aut
omatically displays the usual
speed limits, e.g. in Germany 80 km/h
(50 mph).
If the speed warning for the trailer is deacti-
vated, the system displays the speed limits as
if there were no trailer hitched.
Limited operation
The traffic sign detection system has certain
limitations. The following cases may lead the
system to operate with limitations or not at
all:

Instruments and warning/control lamps
Charge: Char ging z
one. Indicates the
amount of charge generated and the
maximum charge.
Power %: Electric traction zone. Indi-
cates the percentage of power used and
the maximum amount of power currently
available.
The power meter shows the usage level of
the electric drive. The power meter bar shows
the current usage level.
A finer coloured border indicates how much
the propulsion can currently be used. De-
pending on the selected driving program and
the current availability of electrical power,
the boundaries of the different colours can
vary.
The following displays can be seen on the
Power meter:
››› Fig. 58
The vehicle recovers electrical energy
Electric drive switched on / Boost (the ve-
hicle runs for a short time at the maximum
power of the electric motor and combus-
tion engine).
The combustion engine must be running.
Green
Blue
A B
C Battery level indicator
 V
alid for: hybrid vehicles Fig. 59
Instrument panel: battery level indica-
t or

. The small arrow next to the battery symbol
indicat
es which side of the v

ehicle the charg-
ing cover is on. Note

Operation
Control lamps Contr ol and w
arning lampsThe control and warning lamps are indicators
of w
arnings
›

›› , faults or certain functions.
Some contr ol and w
arning lamps come on
when the ignition is switched on, and switch
off when the engine starts running, or while
driving.
Depending on the model, additional text
messages may be viewed on the instrument
panel display. These may be purely informa-
tive or they may be advising of the need for
action ››› page 66, Instrument panel
.
Depending upon the equipment fitted in the
vehicle, instead of a warning lamp, some-
times a symbol may be displayed on the in-
strument panel.
When certain control and warning lamps are
lit, an audible warning is also heard.
Red warning lamps

Instruments and warning/control lamps
Explanation of the function buttons Fig. 65
Schematic representation: Overview of the
possibl e function butt
ons on the screenTop part of the screen
Curr ent time
Driving pr

ofile and navigation informa-
tion. If the user has an active route, both
the time and the distance to the destina-
tion are displayed. If there is no active
route, the driving profile is displayed. On
vehicles with no available driving profile,
the current address is displayed whenev-
er there is no active route.
Air conditioning information. In vehicles
with heated steering wheels or wind-
screen heating, the corresponding icon is
A B
C displayed when these functions are ena-
bl
ed. If not, the curr
ent outside tempera-
ture is displayed.
Telephone information. Information re-
garding your mobile device is displayed:
available network signal strength, estab-
lished Bluetooth connection, unanswered
calls, new messages, battery status, etc.
Number of notifications and customi-
zation of the system depending on the
user and connectivity.
Bottom part of the screen Main menu display mode:
D E
F : main menu with the 6 main functions
divided int o 2 scr
eens (3 + 3, customisa-
ble by the user by pressing on the func-
tion).
: main menu in mosaic mode (all func- tions of the Infotainment system)
Direct accesses to the functions of the In-
fotainment system (up to 10 functions, 5 +
5, customisable by the user). By pressing
on the icon, you can select/deselect the
functions in question.
G
87

Instruments and warning/control lamps
Vehicle information Fig. 67
Schematic representation: Vehicle infor-
mation and st at
us Pressing on 
! Selection
and then on

Vehicle info opens the Vehicle information
menu with the following submenus:
Driving data. The average consump-
tion, average speed, distance travelled,
trip duration and autonomy are shown. It
has 3 memories: “From departure”, “To-
tal calculation” and “From refuelling”
››› page 72.
Vehicle status. The warnings regarding
faults, incidents, memorisation of the
tyre pressure or information of the next
inspection service are displayed. –
–

89

Operation
Opening and closing the rear lid Fig. 83
Rear lid: handle The rear lid opening system operates electri-
cally. It is activ
at
ed by exerting slight pressure
on the handle ››› Fig. 83
.
To lock or unlock the rear lid, press the d or
 buttons of the vehicle key.
A warning appears on the instrument panel
display if the rear lid is open or not properly
closed.* An audible warning is also given if it
is opened while the vehicle is moving faster
than 6 km/h (4 mph)*.
Opening and closing

Air conditioning
Some functions and buttons, as well as the
air conditioning f or the r
ear seats, are only
available depending on the vehicle equip-
ment.
Sensors fields 1 and
2 The temperature of the right and left sides
can be adjust
ed separ

ately using the adjust-
ers. The selected temperature is shown on
the display of the climate control panel.
To set the Climatronic temperature to +22 °C
(+72 °F), the centre of the touch control must
be pressed briefly. To adjust the maximum
cooling or heating power, briefly press and
hold either end of the touch control (red or
blue zone).

The set air temperature is kept constant. Tem-
perature and the amount and distribution of
air are controlled automatically. Automatic
mode is switched off when the fan power is
changed manually.
The fan power in automatic mode can be se-
lected using the air conditioning profile in the
air conditioning settings of the infotainment
system ››› page 161
.
Cooling mode 
Press the button to switch on or off the cool-
ing system. The cooling mode cools and dehumidifies the
air.
Bl

ower

Infotainment system

v Touch oper
ation via the device screen, ro-
tary push-button, menu button and buttons
on the multifunction steering wheel.
Central computer with control and display
unit (9,2”) 1)
The factory-mounted central computer in the
vehicle includes country-specific compo-
nents and software for connectivity and for
the execution of vehicle, comfort and infotain-
ment functions.
The corresponding indications are shown on
the control and display unit screen and partly
on the instrument panel.

v Capacitive colour screen:

v Using the equipment with:

v Touch zones Touch operation.

v Buttons on the multifunction steering
wheel.

v Approach sensors (driver and passenger
side recognition, gesture control).
Vehicle and comfort functions
v Driver assistance system settings.

v Heating and air conditioning settings.

v Lights and visibility function settings.

v Vehicle comfort settings.

v Parking and manoeuvring settings. Sound system Basic equipment:
The inf
ot

ainment system that is supplied from
the factory is equipped as follows:

v Speakers in different locations and with dif-
ferent power levels (watts).

v Internal amplifier depending on the system:

v 8 speakers: 5 x 20 W

v Setting options:

v Equaliser, depending on the system:

v 8 speakers: 5 frequency bands or pre-
defined settings.

v Sound distribution, depending on the sys-
tem:

v8 speakers: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones (valid for 8
speaker system):

v Manual (Driver and All)

v Automatic depending on the seats oc-
cupied.
Optional sound system
The infotainment system can be extended
with an optional sound system as follows:
v 10 speakers in different locations and with
different power levels (watts).
v
Ext ernal amplifier (340 W Ethernet), which
pr

ocesses the audio signals sent by the
central computer.

v Excitation of speaker channels through
class AB final stages.

v Audio signal processing in digital internal
signal processor (DSP).

v Independent subwoofer in the luggage
compartment.

v Setting options:

v User equaliser: 5 bands.

v Sound distribution: Balance + Fader (left /
right / front / rear).

v Sound optimisation by zones:

vManual (Driver, Front and All)

v Subwoofer volume.
Connectivity Wi-Fi

v Wi-Fi conf orming t

o IEEE 802.11 b/g/n.

v Transfer in 2.4 GHz and 5 GHz.

v Three Wi-Fi modes at the same time:

v Tethering (2.4 GHz).

v 2.4 GHz access point.

v Connect System: 1)
Equipment name: Connect System.
180

Infotainment operation
Navigation* Intr oduction Fig. 156
Schematic representation: Navigation
vie w A global satellite system determines the cur-
r
ent position of the v
ehicle and the sensors
mounted on the vehicle analyse the routes
taken. All measured values and possible traf-
fic events are compared with the available
maps to allow optimal navigation to the des-
tination.
Navigation announcements and graphic rep-
resentations will guide you to your destina-
tion.
Navigation management is carried out on the
screen.
Depending on the country, some functions of
the infotainment system will not be available on the screen when travelling above a certain
speed. It is not a malfunction, but is due to
compliance with l
egislation.
Navigation announcements
Navigation announcements are acoustic indi-
cations for driving referred to the current
route.
The type and frequency of navigation an-
nouncements depend on the driving situation,
for example, starting the guide to the destina-
tion, driving on the motorway or on a round-
about and the settings. If the exact destination cannot be reached
because, f
or example, it is in a non-digitised
area, indications relating to the address and
the distance to the destination are displayed
on the screen.
During dynamic route guidance, you will re-
ceive information about reported traffic con-
gestion on the route. An additional navigation
announcement is provided if the route is re-
calculated due to traffic congestion.
While a navigation announcement is playing,
its volume can be adjusted. The following
navigation announcements provided will be
played with the newly adjusted volume. »
203