belt SKODA FABIA 2000 1.G / 6Y User Guide

Downloaded from www.Manualslib.com manuals search engine FABIA 2000➤Inspection and Maintenance
EnginesEdition 09.04
S00.5301.14.2002-3 page 14 02
The listed G12 PLUS coolant additives may be inter-
mixed.
Ribbed V-belt: Inspect condition
Special tools, test and measuring equipment and
auxiliary items required
♦Wrench socket
Perform the following procedure:
–Raise vehicle.
–Remove bottom engine compartment cover at right.
–Use a socket wrench to crank the engine at the belt
pulley -2-.
–Check ribbed V-belt for:
♦Splits in the carcass (initial splits, splits in core, splits
across carcass).
♦Separation of layers (top layer, cords).
♦Sections of carcass broken out.
♦Fraying of cords.
♦Wear to sides (abrasion of material, frayed sides,
hardening of sides, glazed and hardened surfaces).
♦Traces of oil and grease.
♦Correct tension (vehicles without tensioning pulley).
♦It is essential to replace the V-ribbed belt if defects are
found. This will help prevent any operational prob-
lems. Replacing the ribbed V-belt is a repair measure.
♦Engines fitted with an AC compressor are equipped
with a double ribbed V-belt.
Routing of V-ribbed belt
1.0 litre/37 kW (ARV and AQV), 1.4 litre/44 kW (AZE
and AZF), 1.4 litre/50 kW (AME, ATZ and AQW) with-
out air-conditioning
1 - Crankshaft
2 - Tensioning pulley
3 - Coolant pump
4 - AC generator
Note
S02-0025
Note