SKODA OCTAVIA 1999 1.G / (1U) 1.9TDi 66kw Engine Repair Manual
Page 51 of 140
Downloaded from www.Manualslib.com manuals search engine
Page 52 of 140
Downloaded from www.Manualslib.com manuals search engine
!"
#
$
$
%
&
'
#
'
Page 53 of 140
Downloaded from www.Manualslib.com manuals search engine
Edition 08.96
Crank Assembly13
Fig. 2 Inspecting piston ring end clearan-
ce
Special tools, testers and aids required Feeler gauge
- Clean annular groove before inspecting
Piston ring New Wear limit
Dimensions in mm
Fig. 3 Inspecting cylinder bore Special tools, testers and aids required Internal precision measuring instrument 50...100 mm
Inspection procedure
- Measure at 3 points diagonally opposite in transverse direction -A- and in longitudinal direction -B-. Differences compared to nominal size max. 0.10 mm
Note:
The measurement of the cylinder bore must notbe carried out when the cylinder block is
attached to the repair stand with the engineholder MP 1-202 as incorrect measurements
may result.
1st compression ring 0.06 .. 0.09 0.25
2nd compression ring 0.05 .. 0.08 0.25
oil scraper ring 0.03 .. 0.06 0.15
Page 54 of 140
Downloaded from www.Manualslib.com manuals search engine
Page 55 of 140
Downloaded from www.Manualslib.com manuals search engine
Page 56 of 140
Downloaded from www.Manualslib.com manuals search engine
Page 57 of 140
Downloaded from www.Manualslib.com manuals search engine
Page 58 of 140
Downloaded from www.Manualslib.com manuals search engine
Page 59 of 140
Downloaded from www.Manualslib.com manuals search engine
!"
#
Page 60 of 140
Downloaded from www.Manualslib.com manuals search engine