radio SKODA OCTAVIA 2005 1.G / (1U) Nexus Navigation System Manual

Radio/CD/Sound
10you enter the broadcasting area of another regional programme of the
same station.
Ÿpage 42
WARNING
Your attention must, however, always be concentrated on road
traffic as an absolute priority. Do not allow yourself to be distracted
by the RDS running text.CDListening to an audio CD
Listening to a CD
– Press the button Ÿpage 2, fig. 1 . If a CD is already in the
player, the last played track will be selected. Otherwise the
following will appear briefly on the screen: “No Audio CD”.
– Insert a standard 12 cm audio CD. The play function will start automatically.
Playing the previous or next track
– Press button or briefly.
Fast forward/reverse
– Press and hold button or .
Ejecting a CD
– Press Ÿpage 2, fig. 1 .The number of the track and its length are shown on the screen. TP lights
up in orange if traffic reports are to be received and TMC indicates
whether TMC stations are being received Ÿfig. 9 .
Function keys during the play function: ... – Selects the corresponding CD in the CD changer if
connected
2).
– Selects the CD that is in the unit.
– All tracks on the CD will be played for 8 seconds at a time.
– The tracks on the CD will be played in a random order. Ÿpage 42
Syst. settings
Syst. settings
Dest. entry active
Bra-0034
Fig. 9 Main menu CD
2)You will find a description in the corresponding Owner´s Manual.
CD
ƒ
„
ƒ
„
³
A8
CD1
CD6
Int. CDScanMixSyst. settings
sao.book Seite 10 Montag, 22. M‰ rz 2004 9:32 09

Radio/CD/Sound11
WARNING
The CD player is a class 1 laser product. If it is opened, or is faulty
or damaged, there is a risk of invisible laser beams escaping from
the unit. The CD player contains no parts that have to be serviced.
Any repair work that needs to be done should, therefore, be carried
out by Škoda Service exclusively.
Caution
x
Only 12 cm standard CDs should be used, not 8 cm single CDs. Only
round CDs should be inserted in the CD slot. “Special shape CDs” can not
be played and they will damage the CD player.
x
Slide the CD with the printed side up into the CD slot up to the point
where it is drawn in automatically. Hold the CD at the sides. Avoid leaving
fingerprints on the CD. Clean the CD with a dry, lint-free cloth. When doing
this, wipe the CD from the centre outwards. Do not clean the CDs using
alcohol or solvents. Do not place the CDs near heat sources or in the
direct sunlight. Do not write on the CDs and do not attach stickers to them.Note
x
The upper 6 function keys are only active if a CD changer has been
connected.
x
CD-R and CD-RW formats can also be played, depending on the
quality of the blanks.
x
If the text CD ? is displayed in the small marking above the button,
the CD inserted in the CD drive can not be read.
Applies to vehicles: with CD changerPlaying a CD from the CD changer
How to use the radio navigation system to select a CD in
the CD changer.– Use the function keys to to select a CD from the changer.Uneven road surfaces and strong vibrations may cause the CD to jump.
The CD play function should be switched off in this case.
CD
Syst. settings
Dest. entry active
Bra-0077
Fig. 10 CDs currently
in the changer
CD1
CD6
sao.book Seite 11 Montag, 22. M‰ rz 2004 9:32 09

Radio/CD/Sound
12Sound, sound focus and volumeThis section describes how the sound character and the
volume of different sound sources can be set individually.
– Press the button Ÿpage 2, fig. 1 to open the Sound
main menu.Function keys in Sound main menu:
or – Treble or Bass settings Ÿfig. 11
3) – Volume setting for the mid-range frequencies
– Sound focus setting left/right
– Sound focus setting front/rear – Opens the volume set-up where individual volume settings can
be made for the different audio sources Ÿfig. 12 .
Function keys in the volumes set-up function: – The setting for the sensitivity of the speed-dependent volume
adjustment (GALA). The volume of the audio source will be increased
automatically by GALA as the road noise increases at higher speeds. The
volume will be increased more the further the control is set towards the
right.
– Minimum volume for traffic announcements – Minimum volume for telephone conversations
– Minimum volume for navigation system announcements – The traffic announcements are muted as long as a orange
bar can be seen next to the function key.
– Sets the minimum volume for when the unit is switched on.Note
By pressing buttons Ÿpage 2, fig. 1 , and status button
at the same time, you can reset the radio navigation system to the
R F
Bass
back with ESC
TrebleSound RADIO
VolumeBra-0035
Fig. 11 Sound main
menu
Initial volumeVolume set-up
back with ESC
NAV mute
Telephone
NAV min
TA min
GALA
Bra-0036
Fig. 12 Volume
settings
3)Vehicles with a sound system
Š
A3
Treble
Bass
MidBalanceFaderVolu meGALATA M i nTelephoneNAV MinNAV muteInitial volume
Š
A3
TELE
A15
A10
sao.book Seite 12 Montag, 22. M‰
rz 2004 9:32 09

Radio/CD/Sound13
factory settings. The message, Default settings being made. Please
wait! is shown.
sao.book Seite 13 Montag, 22. M‰ rz 2004 9:32 09

Navigation
14Navigation OverviewHow does the navigation system work, and how is it operated?
An optimal route is defined using sensors, satellites and
traffic reports and the driver is then guided to his or her
destination.The current vehicle position is determined using a system of satellites
(GPS - Global Positioning System). Sensors in the vehicle measure
distances that have been driven. Measured values are compared using
the detailed map material on the navigation CD and corrected with the
assistance of TMC traffic announcements as necessary. An optimal route
to the destination is determined in this way.
Navigation announcements and direction arrows shown on the screen
and in the combi-instrument guide you safely and conveniently to your
destination. You can drive to a given address in towns you are unfamiliar
with, or drive to the nearest garage or be guided to a hotel.
In this chapter, answers can be found to the following questions:x
What rules do I have to keep to when using the navigation system?
Ÿ page 14, “Safety”
x
How do I use the navigation CD? Ÿpage 15, “The navigation CD”
x
Can I listen to music when using the navigation system? Ÿpage 15,
“General notes”
x
What happens if I leave the recommended route? Ÿpage 15,
“General notes”
x
Can a navigation announcement be repeated? Ÿpage 39,
“Announcement of navigation recommendations”
x
How does the radio navigation system respond when driving in an
underground car park or a tunnel? Ÿpage 15, “General notes”
x
How do I enter destinations? Ÿpage 17, “Destination entry”
x
How can I enter garages, restaurants or hotels as destinations?
Ÿ page 21, “Special destinations close to the address”
x
Can I store destinations in a memory? Ÿpage 23, “Destination
memory”
x
What parameters can I set for route calculation? Ÿpage 27, “Param-
eters for route calculation”
x
What can I see on the screen? Ÿ page 32, “Map and symbol displays”
x
Can I stop the route guidance function before I reach my destination?
Ÿ page 38, “Route guidance”
SafetyThe navigation system determines the position of the vehicle, the direction
and distance and the route to a selected destination without taking traffic
regulations into account. Navigation recommendations are given as
announcements by the system. Direction arrows are also shown on the
screen. The destination is entered when the vehicle is stationary. The
route guidance function is designed for cars and is thus unsuitable for
larger commercial vehicles.
sao.book Seite 14 Montag, 22. M‰ rz 2004 9:32 09

Navigation15
WARNING
x
Please observe the laws of road traffic legislation when
following the recommendations made by your navigation system.
x
Route guidance is subject to constant changes despite the
information about one-way streets, pedestrian zones etc. stored on
the navigation CD. Information on traffic lights, stop and right of
way signs, parking and stopping restrictions as well as lane
constrictions is not included in the navigation system. Traffic signs
and legislation always have priority over the recommendations
made by the system.
x
Adjust your speed to suit road traffic conditions and also
weather and visibility conditions. Do not drive faster in fog, for
example, if the navigation system tells you to do so.
The navigation CDInserting the navigation CD
– Press the button Ÿpage 2, fig. 1 to eject any CD in the
CD slot.
– Remove the CD and insert the navigation CD with the written side facing up.
– Push the CD into the slot until the radio navigation system pulls it in. The program stored on the navigation CD is loaded.
Do not remove the navigation CD before the loading process
is finished.
The navigation CD contains a digitalised road map. The extent to which
small villages, streets and house numbers are contained on the CD
depends on the CD version.
The content of the CD is constantly being updated. You will receive infor-
mation on new updates at your next Škoda Service. You will need a new
navigation CD for every country that you travel to.
Note
If the text CD ? is displayed in the small marking above the button,
the CD inserted in the CD drive can not be read.General notesYou can continue to listen to the radio or CD (via the CD changer) whilst
you are being guided to your destination.
When entering an address (town, street), only those letters or symbols
which make up a logical entry will be presented. A list of possible names
will be shown. Do not forget to enter the blank space in names made up
of more than one word, such as High Wycombe.
The route will be recalculated if you leave or disregard the route that was
originally calculated. This process takes only a few seconds.
The last announcement made can be repeated. The volume of a naviga-
tion recommendation can be changed whilst it is being made.
A variety of different information on the route can be called up during
active route guidance. The scroll function can be used to page through
lists shown on the screen, either line by line or page by page.
If the display Off Road appears on the screen, it means you are located
on a non-digitalised street, e.g. on a farm track. The GPS satellites will not
be able to reach your antenna when you are in a tunnel or underground
³
A8
CD
sao.book Seite 15 Montag, 22. M‰ rz 2004 9:32 09

Navigation23
Destination memoryStoring destination, stopover destination, flagged destination or location
Storing the different destinations means giving them a
name and storing them in the radio navigation system.
– After entering a new address, press (starting from the Naviga-
tion main menu) Ÿpage 16, fig. 13 , .
– Press to open the letter input menu.
– Enter a name for your destination, e.g. “Mr. Smith” or “Holiday home”.
– Press to save the destination with the name.The destination can now be called up from the memory as you need it. The
name should be short and clear. You can also use the names that are
suggested.
You enter the destination name in the same way used for entering a street
name Ÿpage 18.
back with ESC
Edit memory
Clear dest. memory Delete destinationSort destinations
Rename destination
Delete last dest. Save positionSave flagged dest.
Save stopover
Save dest.
Bra-0084
Fig. 24 Editing the
memory
Save destination
Save destination
back with ESC
Exhibition centre
Bra-0085
Fig. 25 Storing the
destination
Destination
Edit memory
Save dest.OK
sao.book Seite 23 Montag, 22. M‰
rz 2004 9:32 09

Navigation
28w
Traffic jam Ÿpage 27, fig. 32
ƒ
Slow-moving traffic
‚
Road closed
The navigation system will calculate the quickest possible route when the
dynamic route guidance option is active. The system might well guide you
through a traffic jam if the diversion would be longer. Note
x
The dynamic route guidance option will only function if you are
receiving at least one TMC radio station.
x
The radio navigation system will automatically look for a new TMC
station if you leave the reception area of the one you are using. The station
you are listening to, however, does not have to be a TMC station.
x
The dynamic route guidance option will always use motorways, ferries
and toll roads.
x
The quality of the dynamic route guidance depends on the information
contained in the traffic announcements. The radio stations broadcasting
this information are responsible for the content.
Settings
The vehicle position can be entered manually and you can
then start a demonstration journey.
AA
AB
AC
DemoPos. on map Position Town
back with ESC
inactive
Syst. settings active
Set-up
Bra-0093
Fig. 33 Settings in the
Navigation main menu
Position Junction
25m ahead
Direction
Distance
back with ESC
Bra-0094
Fig. 34 Position
settings
sao.book Seite 28 Montag, 22. M‰
rz 2004 9:32 09

Navigation29
Entering your position
– Press in the Navigation main menu Ÿpage 16, fig. 13
to enter the vehicle position.
– Press . The entry window for the town appears. The entry for the street is made after you make your
entry and confirm it with . After confirming the name of the
street you will see a list of the streets which have an intersec-
tion with the named street.
– Select the intersection and confirm your choice by pressing the menu knob.
– Now enter your position either before or after this intersection in metres and also enter the direction of travel using the points
of the compass.
– Confirm your entry by pressing . The screen display will return to the Navigation main menu.
Entering your position on the map
– Press and then to see your set position on the map. The scale of the map can be altered using the two
top left-hand function keys.
– Press the button Ÿpage 2, fig. 1 twice to return to
the Navigation main menu.
Starting the demonstration
– Press and then select active. The navigation system is
activated. – The radio navigation system will now travel along the route
virtually from start to finish if the route guidance function is
started. You can listen to announcements and look at displays.
The navigation system will need some time for an exact definition of your
position if you have transported your vehicle using the train or a ferry. Your
position can be entered manually if the automatic definition is not
successful.
The manual position input can be used to calculate a route between any
two points regardless of where the vehicle is actually located.
Set-upPosition location
OK
OK
Set-up
Position map
ESC
A11
Demo
sao.book Seite 29 Montag, 22. M‰ rz 2004 9:32 09

Navigation
38Route guidanceStarting/stopping route guidance– Press . You will hear an announcement that the
route is being calculated. The radio navigation system will
automatically switch to the map display.
– Press the button to return to the Navigation main menu.
– Press if you wish to stop the route guidance
function before you have reached your destination.The route guidance function can only be started if you have already
entered a destination.
Note
x
You should drive on a bit further if the system makes the announce-
ment that you are not on a digitalised street before starting route guidance.
The unit might have to orientate itself using the next main road.
x
The active route guidance function will be interrupted if a stopover
destination is entered.
Route opt.Destination
Stopover
Set-up
Stop route gd.
Exhibition centre Destination
Bra-0106
Fig. 46 Ending route
guidance
Start route gd.
NAVI
Stop route gd.
sao.book Seite 38 Montag, 22. M‰
rz 2004 9:32 09