lock SKODA YETI 2010 5L Columbus Navigation System Manual
Page 54 of 71
Range selector key NAV (Navigation)
52Manually blocking a stretch of the routeCongestion ahead– Press on the function key   in the ma
p display during a route guidance or  
on the function key   in the main menu  
Navigation
. 
– Press on the function key   in the pop-up window. An overview  
map will be displayed together wi 
th the current vehicle position 
 9 and the travel  
destination 
 3. 
– Turn the set button   anti-clockwise, move a flag symbol 
 4 starting from the  
travel destination in direction of the current vehicle position. Use the finger to press  on the displayed route and the flag symbol 
 4 will “skip” directly to this point. The  
distance taken up by the current congesti 
on will be displayed as of the current  
vehicle position at the bo 
ttom in the touch-screen. 
– Press the set button or the function key  , when the approximate length of the  
stretch of the road to be 
 bypassed is displayed. 
– You will receive an audible announcement  
that parts of the route are blocked and  
that the alternative route is being calculated.
Permanent congestion– Press the function key   and then   in the main menu 
Navigation 
 during route guidance. 
–  - if you wish to add a further blocked section to the  
route. 
– Locate the start of the congestion 
 4 by pressing on the  
route indicated on the  
touch-screen and confirm it by pressi 
ng the function key  . The end of the  
congestion is set in the same way. 
– Name of the congestion - you can name th 
e congestion with the help of the input  
mask for the text entry. 
– - finally deletes th 
e excluded sections  
from the memory of the navigation unit. 
–  - deletes the congestion entered with the button  
Received TMC traffic reports wi 
ll be displayed in the map as
 traffic problems. Currently  
announced traffic problems can also be disp 
layed in the list of TMC traffic reports.
 ... / ...
Route
Congestion ahead
A8
OK
Route
Manage blocked routes
Add excluded street section
OK
Delete excluded rd. section/area to be avoidedDelete temporary congestionCongestion ahead
s32k.a.book  Page 52  Friday, September 18, 2009  1:54 PM 
Page 55 of 71
Range selector key MAP
53
Range selector key MAPMap displayBy pressing the range selector key   you 
can move from any menu into the map  
display. Pressing the range selector key   will op 
en or close an split-screen in the map  
display, where further informatio 
n can be displayed and selected 
⇒page 56, “Split- 
screen in the map display”. During route guidance the map display will di 
ffer in some points from the “normal”  
map display. During the rout 
e guidance the driven route will be highlighted, symbol 
 9, shows the current vehicle position 
⇒fig. 24
 - in the bottom line behind the third  
function key 
  and the distance to the destination and, behind 
  the estimated time  
of arrival or driving time will be displayed. Parts of the road ahead can also be blocked manually during route guidance.Use the function key   to insert or fade out the bar with the function keys in each  display. 
Center the map display for vehicle position or travel destination You can move the indicated map section by pr 
essing your finger on the touch-screen  
and sliding it over the touchscreen. If you have moved the touch-sc 
reen section, a further function key will be faded in at  
the top right under the compass display function key 
 ³  ⇒fig. 24
. Pressing this func- 
tion key will center the map again for the current vehicle position. In some map displays you can center the di 
splay of the travel destination with the  
function key  . Change the type of display The symbol in the second function key 
 5,  6 or  7 shows the currently selected type  
of display. To change these, briefly press press the function key and select a different type of display in the pop-up wind 
ow by pressing the selection again.
 5-2D
 - Two-dimensional: 
Plan view of a conv
entional map display.
 6-3D
 - Three-dimensional: Map display, diag
onally from the front in bird's-eye  
perspective. 7-To p o g ra p h i c 
 - Plan view of a conventional ma
p display with coloured display of  
various terrains (Mo 
untains, Valleys etc.). 
The function key   in the map display without route guidance Pressing on the function key   will op 
en a pop-up window
 with settings for  
navigation. 
 - starts route guidance or continues route guidance to the travel  
destination selected in the main menu  
Navigation
. 
 - calls up the menu  
New dest.
 to change the travel destination  
selected in the main menu  
Navigation
. 
 - to change the parameters for route calculation.
 - stores the current vehicle position  
as flagdest. in the destination memory.
Fig. 24  3D map display during a
 
route guidance (map section  moved).
MAPMAP
 8
 1
Navigation
Navigation
Start route guidanceEnter new destinationRoute options $
s32k.a.book  Page 53  Friday, September 18, 2009  1:54 PM 
Page 59 of 71
Range selector key PHONE
57
Range selector key PHONEOverviewMain menu PHONE Individual functions in the menu TELEPHONE may depend on the  equipment and th 
e properties of the telephone.
Connect your mobile phone with the mobile
 phone program according to the instruc- 
tion manual applicable to your vehicle. – Press the range selector key   to call up the main menu  
PHONE
. 
After the connection process, it will take a fe 
w minutes until the phone book data of the  
mobile phone connected to the radio unit is available. Function keys in the main menu PHONE  - Take calls, establish or hold. After pr 
essing the call
 list, the selected phone  
numbers are displayed in the main menu PHONE. 
 - End conversation or reject call.* - establishes a connection to a an em 
ergency number afte
r further confirma- 
tion. This function is also possible withou 
t a connected mobile phone. It is, however,  
necessary that a connection can be es 
tablished via a mobile phone company. 
 and   to   - Shortcut keys; these can be allocated to, in  
each case, one number. 
 - opens the number block for entering a call number. - opens a pop-up window for selecting a ca 
ll list. Only call lists of missed, dialed  
or accepted calls from the mobile phon 
e preparation program can be displayed. 
,   - several calls can be accepted at once,   -  
switches off the microphone  
during the conversation. Conv
ersations held inside the  
vehicles cannot be heard by the other part 
y when the microphone is switched off. 
 - opens the telephone book of the connected mobile phone for selecting a call  
number.
Enter call numberEnter a number and select– Press on the function key   in the main menu  
PHONE
, in order to open the  
number block for enteri 
ng a call number. 
– Press an inserted number key to accept 
 the corresponding number in the entry  
line. 
– You can delete the characters in the entry line from left to right by pressing the  
function key  . 
– Press function key   when the desired ca 
ll number is indicated in the entry line.  
The connection to the entered call number is established. 
You can select the character “ 
+” instead of the first two digits (for example “
00”) when  
entering a country code. For th 
is step, hold the function key   with the little triangle  
“