manual radio set SKODA YETI 2010 5L Columbus Navigation System Manual
Page 59 of 71
Range selector key PHONE
57
Range selector key PHONEOverviewMain menu PHONE Individual functions in the menu TELEPHONE may depend on the  equipment and th 
e properties of the telephone.
Connect your mobile phone with the mobile
 phone program according to the instruc- 
tion manual applicable to your vehicle. – Press the range selector key   to call up the main menu  
PHONE
. 
After the connection process, it will take a fe 
w minutes until the phone book data of the  
mobile phone connected to the radio unit is available. Function keys in the main menu PHONE  - Take calls, establish or hold. After pr 
essing the call
 list, the selected phone  
numbers are displayed in the main menu PHONE. 
 - End conversation or reject call.* - establishes a connection to a an em 
ergency number afte
r further confirma- 
tion. This function is also possible withou 
t a connected mobile phone. It is, however,  
necessary that a connection can be es 
tablished via a mobile phone company. 
 and   to   - Shortcut keys; these can be allocated to, in  
each case, one number. 
 - opens the number block for entering a call number. - opens a pop-up window for selecting a ca 
ll list. Only call lists of missed, dialed  
or accepted calls from the mobile phon 
e preparation program can be displayed. 
,   - several calls can be accepted at once,   -  
switches off the microphone  
during the conversation. Conv
ersations held inside the  
vehicles cannot be heard by the other part 
y when the microphone is switched off. 
 - opens the telephone book of the connected mobile phone for selecting a call  
number.
Enter call numberEnter a number and select– Press on the function key   in the main menu  
PHONE
, in order to open the  
number block for enteri 
ng a call number. 
– Press an inserted number key to accept 
 the corresponding number in the entry  
line. 
– You can delete the characters in the entry line from left to right by pressing the  
function key  . 
– Press function key   when the desired ca 
ll number is indicated in the entry line.  
The connection to the entered call number is established. 
You can select the character “ 
+” instead of the first two digits (for example “
00”) when  
entering a country code. For th 
is step, hold the function key   with the little triangle  
“