headlamp SSANGYONG KORANDO 2012 User Guide

03-64
21) Auto Light Control (LIN)
The BCM communicates with the auto light sensor when turning the ignition switch to ON position, and
controls the tail lamps and the headlamps depending on the LIN data with the light switch AUTO. 1.

05-118010-01
Indicator
(green)
Headlamp high beam indicator ▶
Front fog lamp indicator ▶
Side light indicator ▶
Indicator
(blue)
Indicator
(green)
Indicator
(amber)
Glow indicator(DSL only) ▶
Indicator
(red)
Fuel filter indicator(DSL only) ▶This indicator comes on when the tail lamp is switched on.
This indicator comes on when the ignition switch is turned to the "ON"
position and will go off when the glow plugs are sufficiently heated.
This indicator comes on when the water level in the fuel filter exceeds a
certain level. This lamp comes on when the headlamp high beam is operated.
This indicator comes on when the fog lamp switch is operated after the tail
lamps comes on.
3) Details of Warning Lamps and Indicators

06-26
Lower main panel switch
3) Lower Main Panel Switch
Rear fog lamp switch(EU ONLY)
Steering wheel heating switchHLLD(Headlamp Leveling Device)4WD LOCK switch
ESP OFF switch

06-278510-00
4WD LOCK switch
This switch is of push lock type, which
enables to increase/decrease the
torque to the rear wheels in AWD
mode.
Steering wheel heating switch
This switch is of push return type,
which is used to activate or deactivate
the steering wheel heating function.
ESP OFF switch
The ESP OFF switch is of push return
type, which is used to stop or resume
the ESP function.
4WD LOCK switch
This switch is of push lock type, which
enables to increase/decrease the
torque to the rear wheels in AWD
mode.
HLLD
(Headlamp Leveling Device)
The headlamp aiming can be adjusted
by using this dial-type switch.
Rear fog lamp switch
(EU ONLY)
This switch is of push return type,
which sends ON/OFF signal to the
BCM so that the BCM can switch on
the lamps by activating the rear fog
lamp relay.

06-32
Light switch ▶
Headlamps ON
Headlamp, side-marker, tail,
license plate, fog, and
instrument cluster lamps come
on.
Tail lamp ON
Side-marker, tail, license plate,
fog, and instrument cluster
lamps come on.
Automatic light ON
Head- and tail lamps
automatically turn on or off based
upon the intensity of the sunlight
analyzed by the automatic light
sensor.Lights OFF
High beam ON
To turn on the headlamp high
beam, push the lever towards
the instrument cluster with the
headlamp low beam on.Right turn signal lamp blinks
Passing
Regardless of the position of the light
switch, when holding the lever toward
the steering wheel, the headlights are
on high beam during the hold.Front fog lamp switch
To turn on the fog lights, turn this
switch while the tail lamps or
headlamps are turned on. Left turn signal lamp blinks

07-2
1. LAMP SPECIFICATIONS
1) Exterior Lamps
Item Type Amount
Front lampHeadlamp (high beam/low beam) BULB: H4 2 EA
Turn signal lamp BULB: PY21W 2 EA
Position lamp BULB: W5W 2 EA
Fog lamp BULB: H27W/2 2 EA
Rear lamp
Stop lamp and tail lampBULB: 12V27/8W (Korea)
P21/5W (Other countries)2 EA
Turn signal lampBULB: 12V27W (Korea)
P21W (Other countries)2 EA
Backup lampBULB: 12V27W (Korea)
P21W (Other countries)2 EA
Stop lamp/Rear fog lamp
(Other countries)BULB: 12V27W (Korea)
P21W (Other countries)2 EA
High-mounted stop lamp LED
(Without spoiler)
(With spoiler)12 EA
24 EA
License plate lamp BULB: W5W 2 EA
Side lampSide repeater lamp LED 5 EA
Puddle lamp LED 2 EA
2) Interior Lamps
Item Type Amount
Front room lampBULB (10W-FESTOON) 2 EA
Center room lampBULB (10W-FESTOON) 1 EA
Luggage lampBULB (10W-FESTOON) 1 EA
Sun visor lampBULB (5W-FESTOON) 1 EA
Glove box lampBULB (5W-FESTOON) 1 EA
Door courtesy lampBULB (5W-WEDGGE) 1 EA
Item Type Amount
Front lampHeadlamp (high beam/low beam) BULB: H4 2 EA
Turn signal lamp BULB: PY21W 2 EA
Position lamp BULB: W5W 2 EA
Fog lamp FRT BULB: H27W/2 2 EA
RR BULB: H21W/2 2 EA

07-4
Puddle (approach) lamp
Front fog lamp
Headlamp
Side repeater lamp
High-beam
/low-beam
Turn signal lamp
Position lamp
1. EXTERIOR LAMP
1) Layout

07-6
(1) Headlamp
2) Operation
High-beam/low-beam
Most of the functions of the headlamp is controlled by the multifunction switch. The functions performed by
REKES or SMART key are controlled by the BCM.
The BCM controls the headlamp and tail lamp by using the data sent through the LIN communication from
the automatic light sensor when the multifunction switch is in AUTO position.
Control by BCM ▶
Coming home lighting control 1.
The headlamp is illuminated for 30 sec. when the ignition switch is turned on and then off with the
multifunction switch in ON or AUTO.
The headlamp is turned off right after the ignition is turned on. And when all the doors (including
tailgate) are closed the headlamp is illuminated for 30 sec.; and all the doors are open, the headlamp
is illuminated for 3 minutes.
This function can be deactivated or activated with a diagnostic equipment. -
-
-
DRL (Day Time Running Light) ▶
DRL is the function to turn on the high beam and tail lamp without any intervention from the light
switch. DRL turns off the lamps when turning off the light switch. This is an additional safety device to
prevent the accident.

07-10
(5) Auto light (LIN)
The auto light sensor unit is installed to the back side of the ECM mirror located upper center of the
windshield, and detects the illuminance change. The BCM communicates with the auto light sensor
when the ignition is turned on, and turns on or off the tail lamp and headlamp automatically according to
the signals from the sensor when the multifunction switch is set to AUTO light.
The BCM communicates with the rain sensor even if the multifunction switch is in tail lamp.
Auto light switch Automatic light sensor unit
(6) Side repeater lamp
Side repeater lamp
The side repeater lamp is operated by the BCM when the BCM receives a signal from the multifunction
switch.
The BCM cycles the side repeater lamp and buzzer (ON/OFF) 75 times per minute.
The side repeater lamp operates only when IGN1 is ON.
If the side repeater lamp fails while it is illuminated, the BCM cycles the lamp and buzzer 100 times per
minute.
The lamp automatically flashes 3 times when the multifunction switch is turned on. If the switch is turned
off
during this operation, the lamp flashes 3 times and then goes off.
If the switch is turned off and then on during the 3 times of automatic flashing, the lamp flashes 3 more
times.