belt SSANGYONG RODIUS 2012 User Guide

02-22
5) Seat Belt Warning
The seat belt warning light comes on and the chime buzzer in the ICM box sounds for 6
<009a008c008a00960095008b009a0047009e008f008c00950047009b009c0099009500900095008e0047009b008f008c00470090008e00950090009b00900096009500470092008c00a00047009b0096004702c80076007502c90047008d00990096009400
4702c80076006d006d02c9005500470070008d0047009b008f>e seat belt is fastened before
<009b009c0099009500900095008e0047009b008f008c00470090008e00950090009b00900096009500470092008c00a00047009b0096004702c80076007502c9004700970096009a0090009b00900096009500530047009b008f008c0047009e0088009900
9500900095008e004700930090008e008f009b004700900095> the indicator display blinks for 6
seconds, however, the chime buzzer does not sound.
The seat belt warning light goes off and the chime buzzer in the ICM box stops when turning
the ignition switch to “OFF” position.
The chime buzzer stops and the seat belt warning light stays on for the specified duration (6
seconds) when fastening the seat belt during the warning operation.
The seat belt warning light comes on and the chime buzzer sounds for 6 seconds again when
unfastening the seat belt during fastening operation. 1.
2.
3.
4.

02-42
▶ Power window, warning lamp(brake, s/belt)

11-54610-00
3. TROUBLESHOOTING
Problem Possible Cause Action
Movements of steering
feels heavyUnregular wear or binding of steering ball joint
due to lack of lubrication or foreign material
insertionLubricate or replace
Damaged or defective steering gear Replace the steering gear
assembly
Incorrect steering pinion preload Adjust
Defective steering shaft join Replace
leakage of steering fluid Repair or replace
Insuffcient steering fluid or air insertionFill up fluid or bleed air
Defective steering oil pump Replace
Damaged or loosened pump drive belt
Adjust or replace
Clogging of fluid line Repair or replace
Damaged wheel or tire Repair or replace
Defective suspension Repair or replace
Steering wheel pulls to
one sideDamaged steering linkage Replace
Damaged wheel or tire Repair or replace
Defective brake system Repair or replace
Defective suspension Repair or replace
Excessive free play of
steering wheelWorn steering gear Replace the steering gear
assembly
Worn or damaged steering ball joint Replace
Looseness of steering gear box Retighten
Poor returning of steering
wheelBroken or binding of steering ball joint Replace
Improper correct steering pinion preload Replace the steering gear
assembly
Damaged wheel or tire Repair or replace
Defective suspension Repair or replace

11-6
Problem Possible Cause Action
Excessive vibration of
steering wheel (shimming)Broken steering linkage Replace
Looseness of steering gear box Retighten
Broken or binding of steering ball joint Replace
Worn or damaged front wheel bearing Replace
Damaged wheel or tire Repair or replace
Defective suspension Repair or replace
Abnormal noise from
steering systemLooseness of steering gear box Retighten
Defective steering gear Replace the gear
assembly
Interference between steering column and
partsRepair
Looseness of steering linkage Retighten
Loosened or damaged oil pump drive belt Repair or replace
Looseness of oil pump bracket Retighten
Looseness of oil pump Retighten
Air insertion into system Bleed air
Defective oil pump Replace
Abnormal noise when
turning steering wheelLooseness of steering column Retighten
Worn or damaged steering shaft bearing Replace the steering
column
Looseness of intermediate shaft Retighten
Too heavy steering wheel Worn or damaged steering shaft bearing Replace the steering
column
Ignition key cannot be
inserted into key cylinderDefective lock cylinder Replace the steering
column
Defective ignition switch Replace the ignition switch

11-10
Oil Pump Pressure Check ▶
Check the oil pump pressure to locate any defect
in oil pump.
Before checking the pressure, check the oil
level and belt tension. Prepare the empty
container to collect the spilled oil during the
service.
Unscrew the pressure line fitting in power
steering pump.
Install the pressure gauge between the
power steering pump and the power steering
oil pressure line.
Place the shift lever to neutral position. Apply
the parking brake.
Open the valve in pressure gauge. Start the
engine and let it run at idle speed.
Turn the steering wheel several times so that
the oil temperature reaches to normal
operating level. A.
B.
C.
D.
E.
Fully close the valve in pressure gauge and
measure the oil pressure. F.
To prevent internal damage, do not close the
gauge valve over 10 seconds.
Keep the oil temperature at proper range. -
-
Relief pressure90 ± 3 bar

12-4
1. OVERVIEW
A radial tire uses a cord angle of 90 degrees. That is, the cord material runs in a radial or direct
line from one bead to the other across the tread. In addition, a radial tire has a belt overwrap
under the tread surface to provide greater structural stability. The belt overwrap of a radial tire
distortion while the radial structure enables high speed driving.
Tire supports the weight of the vehicle, reduces the impact from the road and at the same time,
transmits the power to propel, brake and steer on the road. It also functions to maintain a
<009d008c008f0090008a0093008c02c5009a004700940096009d008c0094008c0095009b0055004700700095004700960099008b008c00990047009b00960047008a0096009400970093008c009b008c0047009a009c008a008f0047009b0088009a009200
9a0053004700880047009b00900099008c00470094009c009a>t be structured to be a resilient
vessel of air.
There is wear limit mark on the tire, which protrudes as a strip shape located approximately 1.6
mm from the groove bottom. This wear limit mark is not seen from the outside so there is
additional &#34;▲&#34; mark on the shoulder to let the driver find the wear mark easily. To measure the tire
groove depth, measure at any point other than the point which has a wear limit mark.
The tire is worn unevenly according to the driver's driving habit, improper servicing, low tire
inflation pressure, changed tire location, etc.
1) Structure of Tire
Tread
This thick layer of rubber provides the
interface between the tire and the road.
Wear-resistant rubber is used to protect the
carcass and belt against fractures and
impacts and to deliver a long driving life.
Shoulder
Located between the tread and sidewall, the
shoulder rubber is the thickest so that the
design must allow for the easy diffusion of
heat generated within the tire while driving.
Sidewall
The part between the shoulder and bead, the
flexible sidewall protects the carcass and
enhances the ride. A tire’s type, size,
structure, pattern, manufacturing company,
product name and various characters are
indicated here. Bead
The bead attaches the tire to the rim and
wraps the end of the cord fabric. Comprised
of the bead wire, core, flipper and other parts,
the bead is generally designed to be slightly
tight around the rim so that in the case of a
sudden drop in inflation pressure, the tire will
not fall off the rim.
Carcass
As the most important framework of a tire, the
entire inner layer of cord fabric is called the
carcass. The carcass acts to support air
pressure, vertical load and absorb shocks.
Valve
Belt
Bead core

02-38810-03
1. SPECIFICATIONS
1) SDM
* Energy reservation for 150 ms even after shutting off the power.
2) Seat Belt
▶Front Seat Belt
Description Specification
Operating voltage 9 ~ 16V
Operating temperature-30 ~ 85℃
Accelerometer dynamic range -50 ~ 50G
Impact record Diagnostic Trouble Code
Description Specification
3-point seat belt<00bd00470073009000940090009b008c008b0047009300960088008b0047009b00a00097008c0047008900a00047009a009b009600970097008c00990047004f0093008c0095008e009b008f00470096008d0047009e008c0089008900900095008e006100
47005a00530059005700570047009400940050>
Height adjuster<00bd0047007a0090008b008c00470089009c009b009b009600950047009b00a00097008c0047004f009a009b009900960092008c006100470059005c0047009400940047009f0047005a0047009a009b008c0097009a004700640047005e005c0047009400
940050>
Pre-tensioner
(optional)· Retract distance: over 120 mm
· Retracting time: 8 to 12 ms
· Slide button type
· Retracting tension: 2 to 3.2 kN
· Spool-out limit: below 50 mm
· Seat belt warning lamp (driver’s)
Buckle · Swivel type
· Seat belt warning lamp (driver’s)

02-4
▶Rear 1st Row Seat Belt
▶Rear 2nd Row Seat Belt
▶Rear 3rd Row Seat Belt
Description Specification Remark
11-seaters (w/
swivel seat)· 3-point seat belt LH/RH (ELR)
· 2-point seat belt LH/RH (ELR)
· Fixed type seat belt· 2-point seat belt (ELR): Swivel seat
· Center seat belt: Fool proof type
· Length of webbing: 3,200 mm (3-point),
1,400 mm (2-point)
· Buckle for ELR
· Buckle for fixed type belt· ELR type: Webbing type
· Fixed type: Webbing and floor type
· Slide button type (All)
11-seaters
(w/o swivel
seat)· 3-point seat belt LH/RH (ELR)
· Fixed type seat belt· Retracting distance: over 120 mm
· Retracting time: 8 to 12 ms
· Retracting tension: 2 to 3.2 kN
· Spool-out limit: below 50 mm
· Buckle for ELR
· Buckle for fixed type belt· ELR type: Webbing type
· Fixed type: Webbing and floor type
Description Specification Remark
11-seaters· 3-point seat belt LH/RH (ELR)
· Fixed type seat belt· Center seat belt: Fool proof type
· Length of webbing: 3,200 mm (3-point)
· Buckle for ELR
· Buckle for fixed type belt· Fixed type: Webbing and floor type
· Slide button type
Description Specification Remark
11-seaters· 3-point seat belt LH/RH (ELR)· Center seat belt: Floor type
· Length of webbing: 3,200 mm (3-point)
· Buckle for ELR
· Buckle for fixed type belt· Fixed type: Webbing and floor type
· Slide button type (All)

02-58810-03
2. OPERATION
1) Air Bag
▶Air bag inflates when:
<0070009500470099008c009a009700960095009a008c0047009b0096004700880047009a008c009d008c0099008c0047008d009900960095009b0088009300470090009400970088008a009b00530047009b008f008c0047008b00990090009d008c009902
c5009a004700880095008b0047008d009900960095009b0047>passenger’s air bags deploy
at the same time to supplement the seat belts to prevent or reduce any personal injuries. ·


▶Air bag can inflate when:
Underbody impact from the road surface; impact against the curb at a very high speed;
dropping impact onto the road surface with a large angle ·
▶Air bag does not inflate when:
Rollover, side impact or rear impact
If the severity of impact to the vehicle is not significant and the seat belts are enough to
protect occupants. ·
·
Air bag seldom inflates when: ▶
Oblique impact, rollover
Weak impact in which the sensor is unable to detect (under the inflation requirements)
Impact against narrow objects such as a utility pole or a tree
The vehicle falls into a drainage or a puddle
The front of the vehicle crashes into a high impact point yyvehicle such as a truck
Impact on the hood by falling stones
The air bag warning light is on
<00740096008b008c00990088009b008c0047009600990047009a008c009d008c0099008c00470090009400970088008a009b0047009b00960047009b008f008c004700940090008b008b0093008c00470096008d0047009b008f008c0047009d008c008f00
90008a0093008c004700890096008b00a002c5009a0047009a>ide structure. In that case,
only the side curtain air bags deploy. ·
·
·
·
·
·
·
·

02-6
When a severe frontal impact occurs, seat
belt pre-tensioners rewind the seat belts
immediately to restrain the occupants to their
seats. It helps the ef￢fective operation of
the seat belts and airbags.
2) Pre-tensioner
3) Warning for Air Bag
Do not diagnose the circuit with a circuit tester. Do not attempt to modify any air bag
components including the steering wheel, air bag mounting area, and harness.
Do not impact any air bag components including the steering wheel, air bag mounting area,
and harness by hand or tools. You may get injured by sudden deployment.
The air bag components will be very hot after deployment. Do not touch them.
Once the air bag system is triggered, the triggered air bag assembly should be removed from
the vehicle and replaced with new one.
The air bag contains explosive materials, so contact Ssangyong Dealer or Ssangyong
Authorized Service Operation when trashing or replacing it.
Incorrect air bag inspection can be dangerous and cause injuries. The air bag system must be
disposed only by Ssangyong Dealer or Ssangyong Authorized Service Operation.
Replace the steering wheel with only Ssangyong genuine part.
When the engine starts, the air bag warning lamp comes on for a system check. It goes out
after 3 to 7 seconds when the system is normal. If this warning lamp stays ON, then the system
may be defective. Have the air bag system checked immediately by Ssangyong Dealer or
Ssangyong Authorized Service Operation.
The seat belt and air the bags are the most effective when you are sitting well back and upright
in the seat.
A child restraint system must not be placed on the front seat. The infant or child can be
severely injured by an air bag inflation in case of an accident.
Do not carry your child on your lap while driving. You cannot resist against the impact pressure
in an accident.
The child could be crushed between you and the parts of the vehicle.
Do not place any objects on the air bag inflation location. You may get injured by those objects
during deployment.
Do not attach any objects such as a sticker, scent bottle, or phone holder on the steering
wheel pad and to the dashboard. -
-
-
-
-
-
-
-
-
-
-
-
-
-