SUBARU CROSSTREK 2016 1.G Navigation Manual

BASIC INFORMATION BEFORE OPERATION
40
8.SelectFinish (Finish).

BASIC INFORMATION BEFORE OPERATION
41
BASIC FUNCTION
2
UNLOADING A DISC
1.Press and remove the disc.
NOTE
ODiscs can be unloaded even when the engine switch is turned
off.
CONNECTING AND
DISCONNECTING A USB MEMORY/
PORTABLE DEVICE
CONNECTING A DEVICE
The device slot is located in the center at the bottom of the
instrument panel or inside the center console box.

”Turn on the power of the device if it is not turned on.
NOTE
O &RPSDWLEOH86%PHPRU\
:3
O &RPSDWLEOHL3RG
:3
O This unit does not support commercially available USB hubs.
O By connecting a device such as a cellular phone, charging starts
depending on the device.

BASIC INFORMATION BEFORE OPERATION
42
LOADING AND UNLOADING AN
SD CARD (WITH NAVIGATION
FUNCTION)
LOADING AN SD CARD
CAUTION
O3RVLWLRQ WKH 6' FDUG ZLWK WKH

BASIC INFORMATION BEFORE OPERATION
43
BASIC FUNCTION
2
4.Close the SD card slot cover.
NOTE
O&RPSDWLEOH6'FDUG
:3
O You can enjoy music/video by inserting an SD card containing
DXGLR

BASIC INFORMATION BEFORE OPERATION
44
1.Turn the ignition switch to the “OFF” position.
2.Open the SD card slot cover.
3.Remove the SD card.

”Press in the SD card until you hear it “click”, let go of
the card, and then pull it straight out.
4.Close the SD card slot cover.
TOUCH SCREEN GESTURES
Operations are performed by touching the touch screen
GLUHFWO\ZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
45
BASIC FUNCTION
2
Operation methodOutline Main use
Drag*2
Touch the
screen with
\RXU

BASIC INFORMATION BEFORE OPERATION
46
TOUCH SCREEN OPERATION
This system is operated mainly by the buttons on the
screen. (Referred to as screen buttons in this manual.)
”When a screen button is touched, a beep sounds.
7KHEHHSVRXQGFDQEHWXUQHGRQRURII
:3
CAUTION
O To prevent damaging the screen, lightly touch the screen
EXWWRQVZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
47
BASIC FUNCTION
2
SPLIT SCREEN OPERATION
The split screen can display multiple information screens,
such as the audio system screen and hands-free screen,
simultaneously.
The following describes screen operation for the system
with navigation function.
1.Press and hold the “AUDIO/TUNE” knob.
2.Split screen is displayed.

”When a screen is selected, the selected screen will
change to a full-screen display.
CUSTOMIZING THE SPLIT SCREEN
The display items/area on the split screen can be changed.
XFrom the split screen
1.Select.
XFrom the “SETTINGS (SETTINGS)” screen
1.SelectSplit Screen (Split Screen) on the “SETTINGS
6(77,1*6

BASIC INFORMATION BEFORE OPERATION
48
ENTERING LETTERS AND
NUMBERS/LIST SCREEN
OPERATION
ENTERING LETTERS AND NUMBERS
When searching by an address, name, etc., or entering
data, letters and numbers can be entered via the screen.
No.Function
Select to enter desired characters.
7H[W

BASIC INFORMATION BEFORE OPERATION
49
BASIC FUNCTION
2
IconFunction
Select to skip to the next or previous page.
Select and hold or to scroll through the
displayed list.
If appears to the right of an item name, the
complete name is too long to display.
Select
to scroll to the end of the name.
Select
to move to the beginning of the name.
SELECTING ALL ITEMS
Some lists contain Select All (Select All). If Select All
(Select All) is selected, it is possible to select all items.
1.SelectSelect All (Select All).

”Unselect All (Unselect All): Unselect all items in the
list.
CHARACTER JUMP BUTTONS IN LISTS
Some lists contain character screen buttons, ABC (ABC),
DEF (DEF) etc., which allow a direct jump to list entries
that begin with the same letter as the character screen
button.
1.Select the desired character jump buttons.
NOTE
O Every time the same character screen button is selected, the list
starting with the subsequent character is displayed.