ECO mode SUBARU CROSSTREK 2017 1.G Multimedia System Manual

ERROR MESSAGES
291
APPENDIX/WHAT TO DO IF/INDEX
10
Mode Message Cause Action
CD³1RPXVLF¿OHVIRXQG1RPXVLF¿OHV
found.)”This indicates that no MP3/WMA/
$$&¿OHVDUHLQFOXGHGLQWKHGLVFInsert a disc on which playable music
data is recorded.
“Check DISC (Check DISC)”It indicates that the disc is dirty,
damaged, or it was inserted upside
down.Clean the disc or insert it correctly.
“DISC Error (DISC Error)” There is a trouble inside the system. Eject the disc.
USB³1RPXVLF¿OHVIRXQG1RPXVLF¿OHV
found.)”This indicates that no MP3/WMA/
$$&¿OHVDUHLQFOXGHGLQWKH86%
memory.Connect a USB memory in which
playable music data is stored.
³1RYLGHR¿OHVIRXQG1RYLGHR¿OHV
found.)”This indicates that there is no video
data in the USB memory.Connect a USB memory in which
playable video data is stored.
“USB Error (USB Error)”Because an over current was
detected.Stop using the device for a short time
and then try again.

ERROR MESSAGES
293
APPENDIX/WHAT TO DO IF/INDEX
10
Mode Message Cause Action
Bluetooth Audio“Music tracks not supported. Please
check your audio player. (Music
tracks not supported. Please check
your audio player.)”A device that is incompatible with
audio playback was connected.‡Check the device settings.
‡Connect a device that is compatible
with audio playback.
SUBARU
STARLINKPlease disconnect mobile device
and install the SUBARU STARLINK
application on your mobile device and
try again.

Bluetooth disconnected, please
reconnect and try again.

Smartphone data connection is poor,
please try to connect again.‡The SUBARU STARLINK
application has not been installed
on your smartphone.
‡Your smartphone power was turned
OFF.
‡The Bluetooth connection has been
lost.
‡The signal quality is weak.
‡Lines are congested.‡Install the SUBARU STARLINK
application.
‡Turn ON the your smartphone
power.
‡Check the Bluetooth connection.
‡Move the car and connect to
SUBARU STARLINK again.
‡Wait a short while and connect to
SUBARU STARLINK again.
‡Start the SUBARU STARLINK
application on your smartphone,
check the service availability, and
then reconnect.
aha“Information acquisition error.
(Information acquisition error.)”When not able to get the requested
information.Please try again (Refresh etc.) later
or reconnect it.
“Poor wireless reception. (Poor
wireless reception.)”When a communication error has
been detected.Please try again in a better
communications environment.
“Entry not recognized. (Entry not
recognized.)”When an invalid operation has been
executed.Please try again (Refresh etc.) later
or reconnect it.
“The station list cannot be acquired.
(The station list cannot be acquired.)”When not able to get the station
information.Please try again (Refresh etc.) later
or reconnect it.

ERROR MESSAGES
294
Mode Message Cause Action
aha“The content cannot be acquired.
(The content cannot be acquired.)”‡When not able to get the content
information.
‡When not able to switch to the Top
content when touching
.‡Please try again (Refresh etc.) later
or reconnect it.
‡Select the desired station again
when the station list appears.
“Action not available. (Action not
available.)”:KHQFRQWHQWVSHFL¿FRSHUDWLRQV
such as “fast forward” or “rewind” are
not available.Please try again (Refresh etc.) later
or reconnect it.
“Failed. (Failed.)”When data transmission failed when
touching
.Please try again later.
“aha communication error - Please
check Owner’s Manual. (aha
communication error - Please check
Owner’s Manual.)”‡When invalid data is received from
the aha application or there is no
response.
‡When the connection to the aha
application via Bluetooth is not
available.
‡When the data reception from this
unit is rejected.Please try again (Refresh etc.)
later or reconnect it. If it is still not
improved, restart the aha application.
“Please select the type of connection
in “aha Settings”. (Please select the
type of connection in “aha Settings”.)”When aha radio setting is set to
USB (USB) when the Android
device is going to be paired via
Bluetooth.When you want to connect to the aha
application with the Android device,
select Bluetooth (Bluetooth) in
the aha radio setting from the setting
screen.