SUBARU CROSSTREK 2017 1.G Multimedia System Manual

BASIC INFORMATION BEFORE OPERATION
39
BASIC FUNCTION
2
4. Select Next (Next).

BASIC INFORMATION BEFORE OPERATION
40
8. Select Finish (Finish).

BASIC INFORMATION BEFORE OPERATION
41
BASIC FUNCTION
2
UNLOADING A DISC
1. Press and remove the disc.
NOTE
ODiscs can be unloaded even when the engine switch is turned
off.
CONNECTING AND
DISCONNECTING A USB MEMORY/
PORTABLE DEVICE
CONNECTING A DEVICE
The device slot is located in the center at the bottom of the
instrument panel or inside the center console box.

”Turn on the power of the device if it is not turned on.
NOTE
O&RPSDWLEOH86%PHPRU\
:3
O&RPSDWLEOHL3RG
:3
OThis unit does not support commercially available USB hubs.
OBy connecting a device such as a cellular phone, charging starts
depending on the device.

BASIC INFORMATION BEFORE OPERATION
42
LOADING AND REMOVING AN
SD CARD (WITH NAVIGATION
FUNCTION)
LOADING AN SD CARD
CAUTION
O3RVLWLRQ WKH 6' FDUG ZLWK WKH

BASIC INFORMATION BEFORE OPERATION
43
BASIC FUNCTION
2
4. Close the SD card slot cover.
NOTE
O&RPSDWLEOH6'FDUG
:3
OYou can enjoy music/video by inserting an SD card containing
DXGLR

BASIC INFORMATION BEFORE OPERATION
44
1. Turn the ignition switch to the “OFF” position.
2. Open the SD card slot cover.
3. Remove the SD card.

”Press in the SD card until you hear it “click”, let go of
the card, and then pull it straight out.
4. Close the SD card slot cover.
TOUCH SCREEN GESTURES
Operations are performed by touching the touch screen
GLUHFWO\ZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
45
BASIC FUNCTION
2
Operation method Outline Main use
Drag*2
Touch the
screen with
\RXU

BASIC INFORMATION BEFORE OPERATION
46
TOUCH SCREEN OPERATION
This system is operated mainly by the buttons on the
screen. (Referred to as screen buttons in this manual.)

”When a screen button is touched, a beep sounds.
7KHEHHSVRXQGFDQEHWXUQHGRQRURII
:3
CAUTION
OTo prevent damaging the screen, lightly touch the screen
EXWWRQVZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
47
BASIC FUNCTION
2
SPLIT SCREEN OPERATION
The split screen can display multiple information screens,
such as the audio system screen and hands-free screen,
simultaneously.
The following describes screen operation for the system
with navigation function.
1. Press and hold the “AUDIO/TUNE” knob.
2. Split screen is displayed.

”When a screen is selected, the selected screen will
change to a full-screen display.
CUSTOMIZING THE SPLIT SCREEN
The display items/area on the split screen can be changed.
XFrom the split screen
1. Select .
XFrom the “SETTINGS (SETTINGS)” screen
1. Select Split Screen (Split Screen) on the “SETTINGS
6(77,1*6

BASIC INFORMATION BEFORE OPERATION
48
ENTERING LETTERS AND
NUMBERS/LIST SCREEN
OPERATION
ENTERING LETTERS AND NUMBERS
When searching by an address, name, etc., or entering
data, letters and numbers can be entered via the screen.
No. Function
Select to enter desired characters.
7H[W