navigation SUBARU CROSSTREK 2017 1.G Multimedia System Manual

Page 241 of 308

SETUP
239
NAVIGATION SYSTEM
8
TRAFFIC
1. 'LVSOD\WKH

Page 243 of 308

SETUP
241
NAVIGATION SYSTEM
8
No. Function
Select to adjust the standard zoom and the angle of tilt.
You can set the level in three stages.
Select to turn the auto zoom function on or off.
Select to automatically reduce the scale of the 2D map
to display the entire route.
Select to select the screen color used in daytime mode.
Select to select the screen color used in nighttime mode.
Select to select the switches that display on the map.
Select to turn the path log save function on or off (saves
in positional order for each trip).
Select a spot displayed on the map during navigation.
Select the check box to show or hide the spot category.
Select the spot category name to open a sub-category.
More (More): Select to save the currently displayed
spot position, or read spot displays saved previously.
You can also restore the default display settings.
”By turning ON the “Auto Zoom (Auto Zoom)” function,
“Viewpoint (Viewpoint)” and “Automatic Overview
(Automatic Overview)” cannot be set.
UNITS AND FORMATS
Sets the units used by the program to measure distance.
You can select to display the time in various international
date formats.
1. 'LVSOD\WKH

Page 245 of 308

SETUP
243
NAVIGATION SYSTEM
8
No. Function
<00360048004f004800460057000300570052000300560048005700030057004b004800030047004400570044000300bf0048004f004700560011000300360048004f00480046005700030057004b00480003004a0058004c00470044005100460048000300
5c005200580003>
want to display. You can select route data related to the
<00bf00510044004f00030047004800560057004c005100440057004c0052005100030052005500030057004b0048000300510048005b00570003005a0044005c00530052004c0051005700030052005100030057004b004800030055005200580057004800
11>
Displays service area information while driving on the
expressway. Select to turn this function on and off.
Select to select the service area information display
items.
When information is available, lane information similar to
<0052005900480055004b004800440047000300550052004400470003005700550044004900bf004600030056004c004a005100560003004c005600030047004c00560053004f0044005c0048004700030044005700030057004b0048000300570052005300
030052004900030057004b00480003>
map. Select to turn this function on and off.
When approaching an expressway exit or a complicated
intersection, the map switches to a 3D display if the
necessary information can be displayed. Select to turn
this function on and off.
Select to turn on the route progress bar which is
displayed as a straight line to the left of the map. This
shows the progress made on the current route. When
a blue arrow is used to indicate position, the arrow
continues to rise as you drive towards your destination.
:D<005c00530052004c00510057005600030044005100470003005700550044004900bf004600030046005200510047004c0057004c005200510056000300440055004800030047004c00560053004f0044005c0048004700030052005100030057004b004800
03>
line.

Page 246 of 308

TIPS FOR THE NAVIGATION SYSTEM
244
TIPS FOR THE NAVIGATION SYSTEM
GPS (GLOBAL POSITIONING
SYSTEM)
REGARDING ERRORS IN CURRENT
POSITION DISPLAY
The system displays the vehicle current position based on
GPS information and data from various sensors and road
maps. However, when the radiowave signals from GPS
satellites are weak or when signals are received from only
two satellites or less, errors may occur in the position.
Modifying or adjusting the system will not prevent these
errors.
LIMITATIONS OF THE NAVIGATION SYSTEM
This navigation system calculates the current position using
satellite signals, various vehicle signals, map data, etc.
However, an accurate position may not be shown depending
RQ VDWHOOLWH FRQGLWLRQV URDG FRQ

Page 247 of 308

TIPS FOR THE NAVIGATION SYSTEM
245
NAVIGATION SYSTEM
8
CAUTION
OThe installation of window tinting may obstruct the GPS
signals. Most window tinting contains some metallic content
that will interfere with GPS signal reception of the antenna in
the instrument panel. We advise against the use of window
tinting on vehicles equipped with navigation systems.
”Accurate current position may not be shown in the
following cases:
‡When driving on a small angled Y-shaped road.
‡When driving on a winding road.
‡When driving on a slippery road such as in sand,
gravel, snow, etc.
‡When driving on a long straight road.
‡When freeway and surface streets run in parallel.
‡After moving by ferry or vehicle carrier.
‡When a long route is searched during high speed
driving.
‡After repeating a change of direction by going
forward and backward, or turning on a turntable in
a parking lot.
‡When leaving a covered parking lot or parking
garage.
‡When a roof carrier is installed.
‡When driving with tire chains installed.‡When the tires are worn.
‡After replacing a tire or tires.
‡When using tires that are smaller or larger than the
IDFWRU\VSHFL¿FDWLRQV
‡When the tire pressure in any of the 4 tires is not
correct.
”Inappropriate route guidance may occur in the
following cases:
‡When turning at an intersection off the designated
route guidance.
‡If you set more than 1 destination but skip any of
them, auto reroute will display a route returning to
the destination on the previous route.
‡When turning at an intersection for which there is
no route guidance.
‡When passing through an intersection for which
there is no route guidance.
‡During auto reroute, the route guidance may not be
available for the next turn to the right or left.
‡During high speed driving, it may take a long time
for auto reroute to operate. In auto reroute, a detour
route may be shown.
‡After auto reroute, the route may not be changed.
‡If an unnecessary U-turn is shown or announced.

Page 248 of 308

TIPS FOR THE NAVIGATION SYSTEM
246‡If a location has multiple names and the system
announces 1 or more of them.
‡When a route cannot be searched.
‡If the route to your destination includes gravel,
unpaved roads or alleys, the route guidance may
not be shown.
‡Your destination point might be shown on the
opposite side of the street.
‡When a portion of the route has regulations
prohibiting the entry of the vehicle that vary by time
or season or other reasons.
‡The road and map data stored in the navigation
system may not be complete or may not be the
latest version.
NOTE
OThis navigation system uses tire turning data and is designed to
ZRUN ZLWK IDFWRU\VSHFL

Page 253 of 308

VOICE RECOGNITION SYSTEM OPERATION
251
Siri/VOICE RECOGNITION SYSTEM
9
VOICE RECOGNITION SYSTEM OPERATION
VOICE RECOGNITION SYSTEM
The voice recognition system enables the navigation,
audio, hands-free systems, etc. to be operated using voice
commands.
Refer to the command list for samples of voice commands.
:3
USING THE VOICE RECOGNITION SYSTEM
STEERING SWITCH
XTy p e A
XTy p e B
Talk switch
”Press the talk switch to start the voice recognition
system.
”To cancel voice recognition, press and hold the talk
switch or the source switch.
MICROPHONE
The microphone is built into the map light slits.
”It is unnecessary to speak directly into the
microphone when giving a command.
NOTE
O:<0044004c0057000300490052005500030057004b0048000300460052005100bf0055005000440057004c0052005100030045004800480053000300450048004900520055004800030056005300480044004e004c0051004a00030044000300460052005000
500044005100470011>

Page 255 of 308

VOICE RECOGNITION SYSTEM OPERATION
253
Siri/VOICE RECOGNITION SYSTEM
9
”With navigation function:
To use the voice recognition system for navigation
function, say the command to change to the
QDYLJDWLRQIXQFWLRQ

Page 258 of 308

VOICE RECOGNITION SYSTEM OPERATION
256
EXPRESSION EXAMPLES FOR EACH FUNCTION
Command Expression examples
Call by specifying
contactPhone the <phone types> number of
<contacts>,
Ring <contacts> ’s <phone types>
number
Call by specifying
phone numberPhone <phone number>
Search artists to
listen to songPut on the artist <name>,
Listen to the singer <name>
Search album names
to listen to songListen to <name> album,
Play me the album <name>
Use navigation
function*Go to GPS,
Go to address entry
*: With navigation function

Page 260 of 308

COMMAND LIST
258 XCommands for changing the audio mode
Voice command Phrase Function
AM mode
changeplay AM, select AMSwitch to AM
mode
FM mode change play FM, select FMSwitch to FM
mode
SiriusXM radio
mode change play XM, select XMSwitch to SiriusXM
mode
CD mode change play CD, select CDSwitch to CD
mode
USB mode
changeplay USB, select USBSwitch to USB
mode
SD mode
change*play microSD, select
microSDSwitch to SD
mode
iPod mode
changeplay iPod, select iPodSwitch to iPod
mode
AUX mode
changeselect AUXSwitch to AUX
mode
Audio off mode
changeaudio off, turn off audio Turn off the Audio
Audio on mode
changeaudio on, turn on audio Turn on the Audio
*: With navigation function
XCommands for changing the mode
Voice command Phrase Function
Hands-free mode
change[go to] phone, phone
screen, phone menuSwitch to HF mode
Audio mode
changego to audioSwitch to audio
mode
aha mode
changego to ahaSwitch to aha
mode
Pandora*
1 mode
changego to PandoraSwitch to Pandora
mode
Navigation mode
change*
2
navigation,
go to navigation,
go to NAV systemSwitch to the voice
command on NAV
system
*1: Pandora is available in the United States, Australia, and New Zealand.
*2: With navigation function

Page:   < prev 1-10 ... 31-40 41-50 51-60 61-70 71-80 81-90 next >