ignition SUBARU CROSSTREK 2017 1.G Multimedia System Manual

BASIC INFORMATION BEFORE OPERATION
38
BASIC INFORMATION BEFORE OPERATION
INITIAL SCREEN
INITIAL SCREEN
WARNING
OWhen the vehicle is stopped with the engine running, always
apply the parking brake for safety.
1. When the ignition switch is in the “ACC” or “ON”
position, the initial screen will be displayed and the
system will begin operating.

”After a few seconds, the “CAUTION (CAUTION)”
screen will be displayed.
2. Select I Agree (I Agree).

”After about 5 seconds, the “CAUTION (CAUTION)”
screen automatically switches to the next screen.

”With navigation function: Select
Language
(Language) to select a language.
XWith navigation function
3. Select Accept (Accept).

BASIC INFORMATION BEFORE OPERATION
44
1. Turn the ignition switch to the “OFF” position.
2. Open the SD card slot cover.
3. Remove the SD card.

”Press in the SD card until you hear it “click”, let go of
the card, and then pull it straight out.
4. Close the SD card slot cover.
TOUCH SCREEN GESTURES
Operations are performed by touching the touch screen
GLUHFWO\ZLWK\RXU

BASIC OPERATION
54
BASIC OPERATION
SOME BASICS
This section describes some of the basic features of the
audio/visual system. Some information may not pertain to
your system.
Your audio/visual system works when the ignition switch is
turned to the “ACC” or “ON” position.
CAUTION
OTo prevent the battery from being discharged, do not leave
the audio/visual system on longer than necessary when the
engine is not running.
TURNING THE SYSTEM ON AND OFF
“POWER/VOLUME” knob: Press to turn the audio/visual
system on and off. The system turns on in the last mode
used. Turn this knob to adjust the volume. Note that the
voice guidance volume can be adjusted during guidance.
“AUDIO/TUNE” knob: Press to display screen buttons for
the audio/visual system.

”A function that enables automatic return to the split
screen from the audio/visual screen can be selected.

:3

RADIO OPERATION
70
No. Information/Function
6HOHFWWRGLVSOD\WKHVRXQGVHWWLQJVFUHHQ
:3
6HOHFWWRGLVSOD\DOLVWRIFDWHJRULHV
:3
Select to search subscribed channels by category.
By turning TuneScan Enable ON with channels
registered in Smart Favorites,
Tune Scan (Tune
6FDQLVGLVSOD\HG
:3
6HOHFWWRUHFHLYHWDJLQIRUPDWLRQ
:3
Select to tune to a preset channel.
is displayed for channels registered in Smart
Favorites.
6HOHFWWRWXUQWKH6;0)HDWXUHGRQRII
:3
Select to show information such as channel name, song
title, and artist name.
6HOHFWWRWXUQWKH7XQH6FDQRQRII
:3
Select to display the “Edit Favorites (Edit Favorites)”
VFUHHQ
:3
6HOHFWWRWXUQWKH7XQH6WDUWRQRII
:3
NOTE
OA clear line of sight is required from the satellite to the SiriusXM®
Satellite Radio antenna. Obstacles such as trees, tall buildings,
and tunnels can block the SiriusXM signal, causing the SiriusXM
radio reception to cut in and out.
OIf the ignition switch is turned “OFF” and then set to the “ACC”
or “ON” position when listening to an XL channel, broadcasting
from the XL channel will not begin. If so, the SXM001 channel
will be broadcast.
OXL channels may include frequent explicit language or mature
programming.
HOW TO SUBSCRIBE TO SiriusXM® Satellite
Radio
To listen to a satellite radio broadcast in the vehicle, a
subscription to the SiriusXM® Satellite Radio service is
necessary.
A SiriusXM
® Satellite Radio is a tuner designed exclusively
to receive broadcasts provided under a separate
subscription. SiriusXM U.S. satellite and data services
are available only in the 48 contiguous USA and DC.
SiriusXM satellite service is also available in Canada; see
www.siriusxm.ca.

BEFORE USING THE APPLICATION
150
BEFORE USING THE APPLICATION
BEFORE USING THE APPLICATION
Precautions to be aware of when using the application are
shown below.
In this chapter, iPhone or Android devices will be referred to
as a smartphone.
WARNING
ODo not connect or operate the smartphone while driving.
OBe sure to park the vehicle in a safe location before
connecting or operating the smartphone.
CAUTION
ODo not leave your smartphone in the car. In particular, high
temperatures inside the vehicle may damage the smartphone.
ODo not push down on or apply unnecessary pressure to the
smartphone while it is connected as this may damage the
smartphone or its terminal.
OIf connecting your smartphone via USB, do not insert foreign
objects into the USB port as this may damage the smartphone
or its terminal.
NOTE
ODepending on the application, certain functions are not available
while driving for reasons of safety.
OIn order to maximize signal reception, performance and precision
of the smartphone, please ensure the smartphone is placed as
close to the system as possible, while ensuring it is stowed and
secure while driving.
OWhen connecting your smartphone via USB, use the original
cables provided with your smartphone or equivalent third-party
FHUWL¿HGFDEOHV
OWhen the ignition switch is in the “ACC” or “ON” position, the
battery of the connected smartphone is charged.
OIf connecting your smartphone via USB, smartphone may not
be recognized when the ignition switch is in the “ACC” or “ON”
position. In this case, remove the smartphone and reconnect it.
OThe accuracy of the displayed information or the signal reception
performance depends on the smartphone or the connected
device, and its wireless connection.
OFor operating the smartphone, see the instruction manual that
comes with it.
O)ROORZ WKH VSHFL

Bluetooth® SETTINGS
189
SETTINGS
7
CHANGING “Bluetooth Power (Bluetooth Power)”
1. Select Bluetooth Power (Bluetooth Power).
QWHEN “Bluetooth Power (Bluetooth Power)” IS ON
The Bluetooth device is automatically connected when
the ignition switch is turned to the “ACC” or “ON” position.
QWHEN “Bluetooth Power (Bluetooth Power)” IS OFF
The Bluetooth device is disconnected, and the system will
not connect to it next time.
NOTE
OWhile driving, the auto connection state can be changed from off
to on, but cannot be changed from on to off.
EDITING THE Bluetooth NAME
1. Select Bluetooth Name (Bluetooth Name).
2. Enter a name and then select OK (OK).
EDITING THE PIN-CODE
1. Select Bluetooth PIN (Bluetooth PIN).
2. Enter a PIN-code and then select OK (OK).

WHAT TO DO IF
285
APPENDIX/WHAT TO DO IF/INDEX
10
XWhen registering/connecting a cellular phone
Symptom Likely cause SolutionPage
Cellular
phoneThis
system
A cellular phone cannot be
registered.An incorrect passcode was entered
on the cellular phone.Enter the correct passcode on the
cellular phone.*-
The registration operation has not
been completed on the cellular phone
side.Complete the registration operation
on the cellular phone (approve
registration on the phone).*-
Old registration information remains
on either this system or the cellular
phone.Delete the existing registration
information from both this system and
the cellular phone, then register the
cellular phone you wish to connect to
this system.* 183
A Bluetooth connection cannot be
made.Another Bluetooth device is already
connected.Manually connect the cellular phone
you wish to use to this system.-184
Bluetooth function is not enabled on
the cellular phone.Enable the Bluetooth function on the
cellular phone.*-
Automatic Bluetooth connection on
this system is set to off.Set automatic Bluetooth connection
on this system to on when the ignition
switch is turned to the “ACC” or “ON”
position.-189
*: For details, refer to the owner’s manual that came with the cellular phone.

WHAT TO DO IF
288 XIn other situations
Symptom Likely cause SolutionPage
Cellular
phoneThis
system
The Bluetooth connection status is
displayed at the top of the screen
each time the ignition switch is turned
to the “ACC” or “ON” position.&RQQHFWLRQFRQ¿UPDWLRQGLVSOD\RQ
this system is set to on.To turn off the display, set connection
FRQ¿UPDWLRQGLVSOD\RQWKLVV\VWHP
to off.- 188
Even though all conceivable
measures have been taken, the
symptom status does not change.The cellular phone is not close
enough to this system.Bring the cellular phone closer to this
system.--
The cellular phone is the most likely
cause of the symptom.Turn the cellular phone off, remove
and reinstall the battery pack, and
then restart the cellular phone.*-
Enable the cellular phone’s Bluetooth
connection.*-
Stop the cellular phone’s security
software and close all applications.*-
Before using an application installed
on the cellular phone, carefully check
its source and how its operation
might affect this system.*-
*: For details, refer to the owner’s manual that came with the cellular phone.