CD changer SUBARU FORESTER 2006 Owners Manual

Page 158 of 355

5
Audio
Antenna system .................................................. 5-2
FM reception ........................................................... 5-2
Installation of accessories ................................ 5-2
Audio set ............................................................. 5-3
Type A audio set ..................................................... 5-3
Type B audio set ..................................................... 5-3
In-dash 6 CD auto changer (Optional audio unit – if equipped) ........................................................ 5-3
Type A audio set (if equipped) .......................... 5-4
Radio operation ...................................................... 5-4
Compact disc player operation ............................. 5-8
CD changer control (if optional in-dash CD changer is connected) ......................................... 5-10
Type B audio set (if equipped) .......................... 5-12
Radio operation ...................................................... 5-12
Built-in CD changer operation ............................... 5-16
In-dash 6 CD auto changer (if equipped) ......... 5-19
Loading and unloading compact discs ................ 5-19
Precautions to observe when handling a compact disc ................................................... 5-21
ProCarManuals.com

Page 160 of 355

Audio
5-3
Audio setYour SUBARU may be equipped with one
of the following audio sets. See the pages
indicated in this section for operating de-
tails.„Type A audio setyRadio operation: refer to page 5-4
y Compact disc player operation: refer to
page 5-8
y CD changer control: refer to page 5-10
„ Type B audio setyRadio operation: refer to page 5-12
y Built-in CD changer operation: refer to
page 5-16
„ In-dash 6 CD auto changer
(Optional audio unit – if
equipped)yInserting and removing a disc or all
discs: refer to page 5-19
500214
500215
500216
ProCarManuals.com

Page 167 of 355

5-10
Audio
„CD changer control (if optional in-dash CD changer is connect-
ed)An optional CD changer can be connected to this audio unit. Consult the instructions that
accompany the CD changer for operating the CD changer itself (e.g., how to load or un-
load CDs). See your SUBARU dealer for more information.
(16)
(17)
(18)
(19)
(20)
500219
(16) CD button
(17) Track selection buttons
(18) RAND (Random) button
(19) RPT (Repeat) button
(20) SCAN button
T To start playback
When the “CD” button (16) is pressed, the
CD changer will start playback. The dis-
play shows the current disc number, track
number and the elapsed time during play-
back.NOTEy If a disc is in the player, the “DISC”
button is used to change from CD play-
er operation to DISC changer opera-
tion. Each time the “DISC” button is
pressed, the operating mode will
change alternately.
y At the end of the disc, the player au-
tomatically continues with the next
disc.
y After playback on the last disc finish-
es, playback will automatically return
to the first disc.
y If you have loaded fewer than 6
discs, any missing disc is automatical-
ly skipped.
T Selection of a desired disc
You can select a desired disc from among
ProCarManuals.com

Page 168 of 355

Audio
5-11
the discs contained in the CD changer
only by pressing the corresponding num-
ber on one of the disc select buttons. If
you are to listen to the 5th disc in the CD
changer, press the “5” button of the disc
select buttons. All other discs in the CD
changer can also be selected in a similar
way.NOTEyNo disc change takes place if the
button corresponding to the storage
tray in which no disc is loaded is
pressed.
y If the disc select button correspond-
ing to the disc now in playback is
pressed again, the disc will be replayed
from its beginning.
T To select a song from its beginning
V Forward direction
Briefly press the “ ” side of the button
(17) to skip to the beginning of the next
track. Each time this side of the button is
pressed, the indicated track number will
increase.
V Backward direction
Briefly press the “ ” side of the button
(17) to skip to the beginning of the current
track. Each time this side of the button is
pressed, the indicated track number will decrease.
T
Fast-forwarding and fast-reversing
V Fast-forwarding
Press the “ ” side of the button (17)
continuously to fast-forward the disc.
Release the button to stop fast-forward-
ing.
If you continue fast-forwarding to the end
of the disc, the CD changer will automati-
cally stop fast-forwarding and start play-
back beginning with the first track on the
current disc.
V Fast-reversing
Press the “ ” side of the button (17)
continuously to fast-reverse the disc.
Release the button to stop fast-reversing.
If you continue fast-reversing to the begin-
ning of the disc, the CD changer will auto-
matically stop fast-reversing and start
playback beginning with the first track on
the current disc.
T Repeat playback
Press the “RPT” button (19) while a song
is playing to play the song repeatedly. The
“RPT” indicator will come on and the song
will be played continuously. To cancel the
repeat mode, press the button again.
Then the “RPT” indicator goes out, and
normal playback mode is restored. T
Random playback
Press the “RAND” button (18) while a disc
is being played back to play all songs on
the disc in a random order. The “RAND”
indicator will come on and all songs on the
disc will be played in a random order.
To cancel the random mode, press the
button again. Then the “RAND” indicator
goes out, and normal playback mode is
restored.
T Scan (a convenient way to become
familiar with a disc)
1. Press the “SCAN” button (20). – The display shows “SCAN” and the
track number being scanned.
– You hear the first 10 seconds of each
track.
– The operation is automatically
cleared after playing all programs.
Then, normal playback starts.
2. Press the “SCAN” button again when
you hear a track you like. – Normal playback resumes.
T To stop playback
To stop playback and switch over to the
radio mode, press the “BAND” button.
ProCarManuals.com

Page 173 of 355

5-16
Audio
„Built-in CD changer operation
(10)(9) (11) (12) (14)
(13) (15) (16)
(17)
(18)
500221
(9) Eject button
(10) SCAN button
(11) CD (CD player selection) button
(12) Disc slot
(13) DISC indicator
(14) Repeat button
(15) Random button
(16) LOAD button
(17) Disc select buttons
(18) Track selection buttonsNOTEy Make sure to always insert a disc
with the label side up. If a disc is insert-
ed with the label side down, it might be
ejected or the player might shut off.
y Single CDs (i.e., 8 cm/3 inch CDs) are
not supported, and if inserted, they will
be immediately ejected.
y If a disc is inserted during a radio
broadcast, the disc will interrupt the
broadcast.
T How to insert a CD(s)
V Inserting a CD
1. Press “LOAD” button (16). If the maga-
zine in the player has an idle position
where you can insert a disc, the “DISC” in-
dicator (13) associated with the idle posi-
tion will blink.
If no indicator blinks, it means that there is
ProCarManuals.com

Page 175 of 355

5-18
Audio
track. Each time the button is pressed, the
indicated track number will increase.
VBackward direction
Briefly press the “ ” side of the button
(18) to skip to the beginning of the current
track. Each time the button is pressed, the
indicated track number will decrease.
T Fast-forwarding and fast-reversing
V Fast-forwarding
Press the “ ” side of the button (18)
continuously to fast-forward the disc.
Release the button to stop fast-forward-
ing.
V Fast-reversing
Press the “ ” side of the button (18)
continuously to fast-reverse the disc.
Release the button to stop fast-reversing.
T Repeat playback
Press the “RPT” button (14) while a song
is playing to play the song repeatedly. The
“RPT” indicator will come on and the song
will be played continuously. To cancel the
repeat mode, press the button again.
Then the “RPT” indicator goes out, and
normal playback mode is restored.
T Random playback
Press the “RDM” button (15) while a disc
is being played back to play all songs on the disc in a random order. The “RDM” in-
dicator will come on and all songs on the
disc will be played in a random order.
To cancel the random mode, press the
button again. Then the “RDM” indicator
goes out, and normal playback mode is
restored.
T
Scan
When the “SCAN” button (10) is pressed
while the disc is being played back, you
can hear the first 10 seconds of each track
to search for the desired program. To con-
tinue listening to the program, press the
“SCAN” button again. After all tracks on
the disc have been scanned, normal play-
back mode is restored.
T How to unload CDs from the player
V Ejecting a CD from the player
Of the discs loaded, you can select and re-
move only one disc.
1. Press the disc select button (17) of the
disc whose “DISC” indicator (13) is ON.
2. Press the eject button (9). Then the
“DISC” indicator associated with the disc
you have selected will blink, and the disc
will be ejected.
To remove more discs in succession, re-
peat Steps 1 and 2.
If you press the eject button after turning
OFF the ignition switch, only one disc will be ejected.
V
Ejecting all discs from the player
(All disc ejection mode)
1. If you continue to press the eject button
(9), the player will produce beep sound
and will enter the all disc ejection mode.
2. Remove the disc that has been eject-
ed. The other discs loaded will then be
ejected one after another. If you do not re-
move the ejected disc within 15 seconds,
the “All disc ejection mode” will be can-
celed.
NOTEAvoid driving the vehicle with a CD
sticking out, because vibration might
make it fall out.Do not attempt to insert two or more
discs into the slot at a time. Doing
so can cause mechanical damage to
the CD changer.
ProCarManuals.com

Page 176 of 355

Audio
5-19
– CONTINUED –
In-dash 6 CD auto changer (if equipped)„Loading and unloading compact discs
(5) (1) (2)
(4) (3)
500222
(1) Disc slot
(2) Disc indicators (disc No.1 to 6)
(3) Disc select buttons (disc No.1 to 6)
(4) Eject button
(5) Disc slot indicator
ProCarManuals.com

Page 177 of 355

5-20
Audio
TTo insert a disc
1. Press one of the disc select buttons (3) (numbered from 1 to 6) for which the disc
indicator light (2) is “OFF”.
The disc indicator lights are located direct-
ly above the corresponding disc select
buttons.
2. The indicator will begin blinking. The
blinking will last for 15 seconds.
During this period, insert a desired disc,
and the disc will begin to play. (If any disc
is not inserted during this period, the “Disc
slot” (1) door will close. Repeat Step 1.)
Be sure to hold a disc with the label side
(the side where titles are printed) up.
3. To insert another disc, repeat Steps 1
and 2 choosing a different disc select but-
ton.
T
To insert six discs at a time
1. Press and hold the disc select button
number 1 until all disc indicators begin
blinking (approximately 1.5 seconds).
2. The indicators will blink for 15 seconds.
During this period, insert desired six discs.
3. When all discs are loaded, the first disc
will begin to play. (If no disc is inserted
within this 15 seconds, the entire disc load
sequence will be canceled.)
T To remove a disc
1. Press the desired one of the disc select
buttons (3) (numbered from 1 to 6) for
which the disc indicator light is on.
2. Press the eject button (4). The selected disc will be ejected and the indicator light
will begin blinking.
3. To remove another disc, repeat Steps
1 and 2 choosing a different disc select
button.
(To remove discs when the ignition switch
is in the “Lock” position, press the eject
button, and the first disc will be ejected.
Press the eject button again, and the next
disc will be ejected and so on. At this time,
the disc select buttons are disabled.)
T
To remove all discs at one time
1. Press and hold the eject button (4) until
all “Disc” indicators begin blinking (ap-
proximately 1.5 seconds), and the first
disc will be ejected.
2. When the disc is removed, the next
one will be ejected, and so on.
T To replace a playing disc with an-
other
Simply press the desired one of disc se-
lect buttons (3) (numbered from 1 to 6) or
press the disc select button on the radio
unit to select the desired disc, and the disc
will begin to play.
T Disc indicators
Lit: when the corresponding storage tray
is occupied by a disc.
Blinking: Disc player is either in loading,
eject or changing mode.
y
Do not attempt to insert two or
more discs into the slot at a time.
Doing so can cause mechanical
damage to the CD changer.
y Use only music CDs identified by
a mark.
y Do not use CDs listed in the fol-
lowing which could cause dam-
age to the CD player.
– 3 inch (8 cm) compact disc.
– Any disc with a peel-off or seal
on it.
– Bent disc.
– Cleaning disc.
– CD accessory. (E.g., 3 inch (8 cm) disc adapter)
y Do not insert or remove any disc
when the automatic transmission
selector lever is in the park posi-
tion; the selector lever in that po-
sition can interfere with disc in-
sertion or removal, causing
scratches on the disc surface (for
AT vehicles).
ProCarManuals.com

Page 178 of 355

Audio
5-21
– CONTINUED –
OFF: No disc is loaded or the ignition
switch is in the “LOCK” position.
VOpen/Closed disc slot indicator
When the disc slot is open, the disc indica-
tors on both sides of the slot illuminate.
T Function control
Refer to CD changer control operating in-
structions described in the “Type A audio
set (if equipped)” section.
Precautions to observe when handling a compact discUse only compact discs (CDs) that have
the mark shown in the following illustra-
tion.
You may also use compact discs (CD-Rs
and CD-RWs) that have the following
marks, but you may not use some discs if
they were produced using writing methods
not compatible with your vehicle’s audio
system.
yYou cannot use a DualDisc in the CD
player. If you insert a DualDisc into the
player, the disc may not come out again,
possibly causing the player to malfunc-
tion.
y In cold and/or rainy weather, dew can
500033
500010500253
TM
DualDisc
ProCarManuals.com