steering SUBARU FORESTER 2016 SJ / 4.G Navigation Manual

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 6
TALKING ON THE Bluetooth PHONE
While talking on the phone, this screen is displayed. The
operations outlined below can be performed on this screen.
No. Function Page
Select to display the dial pad to send tones. 113
Select to mute your voice to the other party. -
Select to change handset modes between
hands-free and cellular phone.-
Select to adjust your voice volume that the
other party hears from their speaker.11 8
No. Function Page
Select to send tones. This button only appears
when a number that contains a (w) is dialed in
hands-free mode.11 7
Select to hang up the phone. -
Select or to adjust the volume of the
other party’s voice.-
Select to start talking with the other party. 118
NOTE
OWhen cellular phone call is changed to hands-free call, the
hands-free screen will be displayed and its functions can be
operated on the screen.
OChanging between cellular phone call and hands-free call can be
performed by operating the cellular phone directly.
OTransferring methods and operations will be different depending
on the type of cellular phone you have.
OFor the operation of the cellular phone, see the manual that
comes with it.
OTurn the “POWER/VOLUME” knob, or use the volume control
switch on the steering wheel to adjust the volume of the other
party's voice.

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 8
TRANSMIT VOLUME SETTING
1.SelectMic Volume (Mic Volume).
2.Select the desired level for the transmit volume.
3.SelectOK (OK).
NOTE
OThe sound quality of the voice heard from the other party’s
speaker may be negatively impacted.
OTo reset the transmit volume, select
Default (Default).
O
Mic Volume (Mic Volume) is dimmed when mute is on.
INCOMING CALL WAITING
When a call is interrupted by a third party while talking, this
screen is displayed.
1.Select or press the switch on the steering
wheel to start talking with the other party.
To refuse to receive the call: Select or press the switch on the steering wheel.

”Select
or press the switch on the steering
wheel to end the current call and return to the
conversation with the party on hold.

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 9
PHONE
4
Bluetooth PHONE MESSAGE
FUNCTION
Received messages can be forwarded from the connected
Bluetooth phone, enabling checking and replying using the
system.
Depending on the type of Bluetooth phone connected,
received messages may not be transferred to the message
inbox.
If the phone does not support the message function, this
function cannot be used.
XWithout navigation function
1.Select.
2.Select.

”The phone top screen can be displayed by pressing
the
switch on the steering wheel.
3.Check that the message inbox screen is displayed.
XWith navigation function
1.Select.
2.SelectPHONE (PHONE).
3.Select.

”The phone top screen can be displayed by pressing
the
switch on the steering wheel.
4.Check that the message inbox screen is displayed.

” : Select to change to phone mode.

Bluetooth® SETTINGS
164
Bluetooth® SETTINGS
REGISTERING/CONNECTING
Bluetooth
® DEVICE
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth SIG, Inc.
REGISTERING A Bluetooth PHONE FOR
THE FIRST TIME
To use the hands-free system, it is necessary to register a
Bluetooth phone with the system.
Once the phone has been registered, it is possible to use
the hands-free system.
This operation cannot be performed while driving.
<00290052005500030047004800570044004c004f0056000300440045005200580057000300550048004a004c0056005700480055004c0051004a0003004400030025004f005800480057005200520057004b0003004700480059004c00460048001d000301
3a0033>
1.Turn the Bluetooth connection setting of your cellular
phone on.
”This function is not available when Bluetooth
connection setting of your cellular phone is set to off.
XWithout navigation function
2.Select to display the phone top screen.

”Operations up to this point can also be performed by
pressing the
switch on the steering wheel.
XWith navigation function
2.Select and select PHONE (PHONE) to display
the phone top screen.

”Operations up to this point can also be performed by
pressing the
switch on the steering wheel.
3.SelectYes (Yes) to register a phone.
4.When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth device.

BASIC OPERATION
187
NAVIGATION SYSTEM
8
No. Function
Select to start navigation on the map. The button itself
shows the current position, recommended route, and
reduces the surrounding area to display on the map
being used. Select to enlarge the map to full-screen
size.
Select to search for a destination. You can select which
method to use to reach your destination by entering the
address, selecting a favorite spot, selecting a position
on the map, or selecting from the destination list. You
can also select recent destinations from Smart History,
or enter coordinates into the system.
Select to perform various route related functions such
as editing or canceling the route, setting the route
departure point, selecting a different route, avoiding a
part of the route, performing a navigation simulation, or
adding an entry to the destination list.
Select to set the navigation software operating method,
start the tutorial, show a demo route simulation, or start
various other auxiliary applications.
Select or to adjust the guidance volume.
Select to clear the route and cancel navigation.
No. Function
6HOHFWWRRSHQWKH³7UDI¿F6XPPDU\7UDI¿F6XPPDU\´
screen.
NOTE
OGuidance volume can be adjusted during guidance by turning
the“POWER/VOLUME” knob, or by using the volume control
switch on the steering wheel.
GPS INDICATOR
The GPS reception quality icon at the top right of the
menu screen indicates the current accuracy of positional
information.
Indicator Condition
The software is not connected to the GPS receiver.
Cannot perform GPS navigation.
Although the software is connected to the GPS
receiver, the signal is too weak to measure the
GPS. Cannot perform GPS navigation.
Only a few satellites are transmitting. Positional
information is available, but altitude (elevation
above sea level) cannot be calculated. GPS
navigation is possible, but large positional errors
may occur.

VOICE RECOGNITION SYSTEM OPERATION
234
VOICE RECOGNITION SYSTEM OPERATION
VOICE RECOGNITION SYSTEM
The voice recognition system enables the navigation,
audio, hands-free systems, etc. to be operated using voice
commands.
Refer to the command list for samples of voice commands.

:3
USING THE VOICE RECOGNITION SYSTEM
STEERING SWITCH
Talk switch

”Press the talk switch to start the voice recognition
system.

”To cancel voice recognition, press and hold the talk
switch.
MICROPHONE
The microphone is built into the map light slits.

”It is unnecessary to speak directly into the
microphone when giving a command.
NOTE
O:<0044004c0057000300490052005500030057004b0048000300460052005100bf0055005000440057004c0052005100030045004800480053000300450048004900520055004800030056005300480044004e004c0051004a00030044000300460052005000
500044005100470011>
OVoice commands may not be recognized if:
‡Spoken too quickly.
‡Spoken at a low or high volume.
‡Driving with a window open.
‡Passengers are talking while voice commands are spoken.
‡The air conditioning speed is set high.
‡When air from the ventilator blows directly toward the
microphone.
OIn the following conditions, the system may not recognize the
command properly and using voice commands may not be
possible:
‡The command is incorrect or unclear. Note that certain words,
DFFHQWV RU VSHHFK SDWWHUQV PD\ EH GLI

INDEX
282
SiriusXM® satellite radio ................................................................. 65
Split screen ..................................................................................... 23
Split screen operation ..................................................................... 42
Customizing ................................................................................ 43
STARLINK .................................................................................... 138
Starting route guidance ................................................................ 204
Canceling .................................................................................. 205
Route simulation ....................................................................... 204
Starting ..................................................................................... 204
Status display ................................................................................. 24
Steering switches ........................................................................... 87
T
Talking on Bluetooth phone .......................................................... 116
Incoming call waiting................................................................. 118
Sending tones ........................................................................... 117
Transmit volume setting ............................................................ 118
Touch screen gestures ................................................................... 40
Touch screen operation .................................................................. 41
7UDI