wheel size SUBARU FORESTER 2016 SJ / 4.G Navigation Manual

BASIC OPERATION
187
NAVIGATION SYSTEM
8
No. Function
Select to start navigation on the map. The button itself
shows the current position, recommended route, and
reduces the surrounding area to display on the map
being used. Select to enlarge the map to full-screen
size.
Select to search for a destination. You can select which
method to use to reach your destination by entering the
address, selecting a favorite spot, selecting a position
on the map, or selecting from the destination list. You
can also select recent destinations from Smart History,
or enter coordinates into the system.
Select to perform various route related functions such
as editing or canceling the route, setting the route
departure point, selecting a different route, avoiding a
part of the route, performing a navigation simulation, or
adding an entry to the destination list.
Select to set the navigation software operating method,
start the tutorial, show a demo route simulation, or start
various other auxiliary applications.
Select or to adjust the guidance volume.
Select to clear the route and cancel navigation.
No. Function
6HOHFWWRRSHQWKH³7UDI¿F6XPPDU\7UDI¿F6XPPDU\´
screen.
NOTE
OGuidance volume can be adjusted during guidance by turning
the“POWER/VOLUME” knob, or by using the volume control
switch on the steering wheel.
GPS INDICATOR
The GPS reception quality icon at the top right of the
menu screen indicates the current accuracy of positional
information.
Indicator Condition
The software is not connected to the GPS receiver.
Cannot perform GPS navigation.
Although the software is connected to the GPS
receiver, the signal is too weak to measure the
GPS. Cannot perform GPS navigation.
Only a few satellites are transmitting. Positional
information is available, but altitude (elevation
above sea level) cannot be calculated. GPS
navigation is possible, but large positional errors
may occur.