buttons SUBARU IMPREZA 2017 5.G Multimedia System Manual

INTRODUCTION
6
OUsing the unit during extremely high or low temperature may
result in mistaken operation or a malfunction. In particular, the
temperature inside the vehicle can often rise to a high level
during the summer. Cool the vehicle, for example by opening
a window, before using the unit.
O Be careful if metal or water enters the unit, or the unit is
exposed to a strong impact, because it may result in a
malfunction.
O The touch buttons on the display screen may not operate
correctly if condensation forms inside them. If this happens,
do not attempt to operate the switches until the condensation
has disappeared.
O If juice or similar liquid is spilled on the display, wipe
off immediately. Failure to do so may result in product
malfunction.
O 7KH VFUHHQ LV HDVLO\ PDUNHG E\

INTRODUCTION
INTRODUCTION
9
Prior to the actual use of this system, learn how to use it and
become thoroughly familiar with it. Read the entire manual
to make sure you understand the system. Do not allow
other people to use this system until they have read and
understood the instructions in this manual.
For your safety, some functions may become inoperable
when driving. Unavailable screen buttons are dimmed. Only
when the vehicle is not moving, can the destination and
route selection be done.
WARNING
O
For safety, the driver should not operate the system while he/
VKHLVGULYLQJ,QVXI

1
2
3
4
5
6
7
8
9
10
11
Table of Contents
1QUICK GUIDE
BASIC FUNCTION ................................................ 20
OVERVIEW BUTTONS .........................................................20
“HOME (HOME)” SCREEN ..................................................22
“APPS (APPS)” SCREEN ....................................................23
“INFO (INFO)” SCREEN .......................................................24 SPLIT SCREEN .....................................................................25
STATUS DISPLAY .................................................................26
QUICK REFERENCE ............................................ 28
“SETTINGS (SETTINGS)” SCREEN ....................................28
NAVIGATION OPERATION .................................. 29
REGISTERING HOME (WITH NAVIGATION FUNCTION) ...29
OPERATION FLOW: GUIDING THE ROUTE
(WITH NAVIGATION FUNCTION) .........................................31SETTING HOME AS THE DESTINATION
(WITH NAVIGATION FUNCTION) .........................................32
FUNCTION INDEX ................................................ 34
FUNCTION INDEX ................................................................34
2BASIC FUNCTION
BASIC INFORMATION BEFORE OPERATION ... 38
INITIAL SCREEN ..................................................................38
” INITIAL SCREEN ............................................................38
LOADING AND UNLOADING A DISC ..................................40
” LOADING A DISC ............................................................40

” UNLOADING A DISC.......................................................41
CONNECTING AND DISCONNECTING A USB MEMORY/
PORTABLE DEVICE .............................................................41
” CONNECTING A DEVICE ...............................................41
LOADING AND UNLOADING AN SD CARD
(WITH NAVIGATION FUNCTION) .........................................42
” LOADING AN SD CARD .................................................42

” UNLOADING AN SD CARD ............................................43
TOUCH SCREEN GESTURES .............................................44
TOUCH SCREEN OPERATION ............................................46
INFO SCREEN OPERATION ................................................46
” REORDERING THE MENU ICONS ................................46
SPLIT SCREEN OPERATION ...............................................47

” CUSTOMIZING THE SPLIT SCREEN ............................47
ENTERING LETTERS AND NUMBERS/
LIST SCREEN OPERATION .................................................48
” ENTERING LETTERS AND NUMBERS .........................48

” LIST SCREEN OPERATION ...........................................48
SCREEN ADJUSTMENT ......................................................\
50
” CHANGING BETWEEN DAY AND NIGHT MODE ..........52

BASIC FUNCTION
20
BASIC FUNCTION
OVERVIEW BUTTONS
XWithout navigation function
XWith navigation function
No. Function Page
%\WRXFKLQJWKHVFUHHQZLWK\RXU

BASIC FUNCTION
25
1
QUICK GUIDE
SPLIT SCREEN
Press and hold the “AUDIO/TUNE” knob, to display the
split screen.
The split screen can display two information screens
simultaneously, such as the audio system screen and
hands-free screen or the hands-free screen and navigation*
screen. When hands-free mode is selected, it is possible
to make a call on the home screen if the desired telephone
number is registered to one of the 4 displayed buttons. In
order to register the contact, select and hold the desired
button and register the desired contact by obey displayed
PHVVDJHVRQWKHVFUHHQ
:3
*: With navigation function
When a screen is selected, the selected screen is switched
to a full-screen display. The split screen can be set to a two-
way split screen.
)RUGHWDLOVDERXWVHWWLQJWKHVSOLWVFUHHQ
:3No. Function Page
Select to display the “Customize Split
Screen (Customize Split Screen)” screen. 47

BASIC INFORMATION BEFORE OPERATION
46
TOUCH SCREEN OPERATION
This system is operated mainly by the buttons on the
screen. (Referred to as screen buttons in this manual.)
”When a screen button is touched, a beep sounds.
7KHEHHSVRXQGFDQEHWXUQHGRQRURII
:3
CAUTION
O To prevent damaging the screen, lightly touch the screen
EXWWRQVZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
49
BASIC FUNCTION
2
IconFunction
Select to skip to the next or previous page.
Select and hold or to scroll through the
displayed list.
If appears to the right of an item name, the
complete name is too long to display.
Select
to scroll to the end of the name.
Select
to move to the beginning of the name.
SELECTING ALL ITEMS
Some lists contain Select All (Select All). If Select All
(Select All) is selected, it is possible to select all items.
1.SelectSelect All (Select All).

”Unselect All (Unselect All): Unselect all items in the
list.
CHARACTER JUMP BUTTONS IN LISTS
Some lists contain character screen buttons, ABC (ABC),
DEF (DEF) etc., which allow a direct jump to list entries
that begin with the same letter as the character screen
button.
1.Select the desired character jump buttons.
NOTE
O Every time the same character screen button is selected, the list
starting with the subsequent character is displayed.

BASIC OPERATION
54
BASIC OPERATION
SOME BASICS
This section describes some of the basic features of the
audio/visual system. Some information may not pertain to
your system.
Your audio/visual system works when the ignition switch is
turned to the “ACC” or “ON” position.
CAUTION
OTo prevent the battery from being discharged, do not leave
the audio/visual system on longer than necessary when the
engine is not running.
TURNING THE SYSTEM ON AND OFF
“POWER/VOLUME” knob: Press to turn the audio/visual
system on and off. The system turns on in the last mode
used. Turn this knob to adjust the volume.
“AUDIO/TUNE” knob: Press to display screen buttons for
the audio/visual system.

”A function that enables automatic return to the split
screen from the audio/visual screen can be selected.

:3

RADIO OPERATION
61
AUDIO
3
No.Function
Select to display the audio source selection screen.
Select to display the cache radio operation buttons.

:3
6HOHFWWRGLVSOD\WKHVRXQGVHWWLQJVFUHHQ
:3
Select to display a list of receivable stations/channels.
Select to scan for receivable stations/channels.
HD Radio only: Select to store information of the audio
FXUUHQWO\EHLQJEURDGFDVWRQWKHUDGLR
:3
Select to tune to a preset station/channel.
Select to turn HD Radio mode on/off. When the HD
Radio indicator is off, the station list shows only analog
broadcasts.
Select to display the additional text information.
Analog FM only: Select to display RBDS text messages.
NOTE
OThe radio automatically changes to stereo reception when a
stereo broadcast is received.
O The radio automatically blends to an HD Radio signal in AM or
FM where available.
PRESETTING A STATION
Radio mode has a mix preset function, which can store up
to 36 stations from any of the AM, FM or SiriusXM Satellite
Radio bands.
1.Tune in the desired station.
2.Select(add new) ((add new)).

”
To change the preset station to a different one, select
and hold the preset station.
3.SelectYes <HVRQWKHFRQ

RADIO OPERATION
68
PLAYING BACK THE CACHE MANUALLY
The broadcast cached in the program cache can be played
back manually.
1.'LVSOD\WKHFDFKHUDGLRRSHUDWLRQEXWWRQV
:3
2.Select the desired cache radio operation button.
No.Function
Hides the cache operation buttons.
Skips backward 2 minutes.
Fast rewinds continuously.
Plays or pauses the radio broadcast.
Fast forwards continuously.
Skips forward 2 minutes.
No.Function
Returns to the live radio broadcast.
Shows the current playback location relative to the
cached broadcast recording time with a bar scale.

”Allows HD Radio receivers to store content (songs/
programs and data) in a buffer. Playback shall start at
any point in the buffer and shall continue until the end of
the buffer or until the user has selected to stop playback.
Live Pause has the ability to store both analog and digital
content in the buffer.