length SUBARU IMPREZA 2017 5.G Navigation Manual

SETTING THE CAMERA IMAGE DISPLAY TIME
The length of time that the camera image remains displayed
when the shift lever/select lever is shifted from “R” to “D”
can be set. (
WP.62)
VIEWING RANGE ON THE SCREEN
CAUTION
lThe range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.
The area from the rear end of the bumper can be viewed.
Areas at both ends of the bumper and areas just under the
bumper cannot be viewed. Also, the image from the rear
view camera looks shorter than the actual distance.
XRange of view
REAR VIEW CAMERA
46
docstructure.indb 462016/10/27 15:27:39

No.FunctionPage
Select to change the language.When
(Synchronized Language Settings) is selected, the language setting in the system is synced to the language setting in the meter cluster.
-
Select to change the unit of measure for distance.
When (Units
synchronized) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.
-
Select to set the length of time that the camera image remains displayed when the shift lever/select lever is shifted from “R” to “D”.-
Select to update system software versions. 70
Select to turn the available new system software version check on/off.70
Select to turn the automatic downloading of updates on/off.70
Select to display the system information.-
Select to change the Bluetooth system name. -
No.FunctionPage
Select to reset all setup items.The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes.
-
*2Select to automatically adjust Daylight Saving Time.-
Select to display the software license.-
*1: 8-inch with Navi system/8-inch system only
*2: Only for 8-inch with Navi system. It may be available depending on the software version.
SETTING THE DRIVER PROFILE
ADDING A NEW PROFILE
1. Display the general settings screen. (
WP.62)
2. Select (Driver Pro