light SUBARU IMPREZA 2017 5.G Navigation Manual

SCREEN ADJUSTMENT
ADJUSTING BRIGHTNESS
The brightness of the screen can be adjusted. (
WP.62)
CHANGING BETWEEN DAY AND NIGHT
MODE
Depending on the position of the headlight switch, the
screen changes to day or night mode.
NOTE
l8-inch with Navi system only: Regardless of the position of the headlight switch, the screen mode can be changed. (
WP.185)
STATUS DISPLAY
The status of the Bluetooth connection, etc. is displayed on
the screen.
No. NameConditions
Screen hierarchyDisplays the screen context.
*CD indicatorThis icon is displayed when a disc has been inserted.
*
The level of Wi-Fi® reception
When Wi-Fi® function is off, no item is displayed.
BASIC INFORMATION BEFORE OPERATION
41
Basic Function
2
docstructure.indb 412016/10/27 15:27:37

No.FunctionPage
Select to change the language.When
(Synchronized Language Settings) is selected, the language setting in the system is synced to the language setting in the meter cluster.
-
Select to change the unit of measure for distance.
When (Units
synchronized) is selected, the unit of measure setting in the system is synced to the unit of measure setting in the meter cluster.
-
Select to set the length of time that the camera image remains displayed when the shift lever/select lever is shifted from “R” to “D”.-
Select to update system software versions. 70
Select to turn the available new system software version check on/off.70
Select to turn the automatic downloading of updates on/off.70
Select to display the system information.-
Select to change the Bluetooth system name. -
No.FunctionPage
Select to reset all setup items.The audio system restarts automatically after resetting factory data. To complete the reset process, turn the ignition switch to the “LOCK”/“OFF” position after the audio system has restarted, and then turn to the “ACC” or “ON” position after approximately 3 minutes.
-
*2Select to automatically adjust Daylight Saving Time.-
Select to display the software license.-
*1: 8-inch with Navi system/8-inch system only
*2: Only for 8-inch with Navi system. It may be available depending on the software version.
SETTING THE DRIVER PROFILE
ADDING A NEW PROFILE
1. Display the general settings screen. (
WP.62)
2. Select (Driver Pro

OTHER SETTINGS
73
Settings
3
VEHICLE CUSTOMIZATION
1. Press .
2. Select Settings (Settings).
3. Select Vehicle (Vehicle).
4. Select the desired item to be set.
NOTE
lWhen the settings screen is displayed on the combination meter display or multi function display, vehicle customization cannot be performed at the vehicle settings screen.
VEHICLE SETTINGS SCREEN
No.Function
Select to set and customize the sensitivity of the auto light sensor.
Select to set the leaving time and approaching time.
docstructure.indb 732016/10/27 15:27:57

OTHER SETTINGS
74
No.Function
Select to set the time displayed on the multi function display.“Auto”: The time is automatically corrected based on the following.
X8-inch with Navi systemGPS time information
X8-inch system/6.5-inch systemTime information from the connected cellular phone
“Manual”: The time is adjusted manually. After selecting “Manual”, use the multi function display to set the time. Refer to the vehicle Owner’s Manual for details on the setting method.
Select to set and customize the interior light off delay timer.
Select to set and customize the operation of the defogger.
Select to set the settings used when the keyless access function was operated.
Select to turn the one-touch lane changer on/off.
docstructure.indb 742016/10/27 15:27:57

SETUP
186
No.Function
Select to set the route type.
Select to set avoidance criteria for the route calculation.
Select to turn the display for the junction view on/off.
Select to set the screen mode.“Auto”: Select to change the screen to day or night mode depending on the position of the headlight switch.“Day”: Select to always display the map in day mode.“Night”: Select to always display the map in night mode.
Select to register or edit the home address.
• When home has been registered, (Change Home) is displayed.• For details on registering or editing the address:
WP.168
Select to register or edit the work address.
• When work has been registered, (Change Work) is displayed.• For details on registering or editing the address:
WP.168
Select to turn the display for POI icons on/off.
No.Function
Select to set whether the arrival time is displayed with the 24-hour clock or 12-hour clock. (
WP.178)
Select to set whether to automatically enlarge the map when approaching intersections or turning points during route guidance.
docstructure.indb 1862016/10/27 15:28:42