stop start SUBARU OUTBACK 2001 3.G User Guide

Page 204 of 453

5-18
Scan (a convenient way to become familiar with a disc)
1. Press the “SCAN ” b utton J.
– The d isp lay shows “SCAN ” and the trac k numb er b eing
sc anned .
– You hear the first 10 sec ond s of eac h trac k.
– The op eration is automatic ally c leared after p layin g all p ro-
g rams. Then, normal p layb ac k starts.
2. Press the “SCAN ” b utton ag ain when you hear a trac k you like.
– Normal p layb ac k resumes.
To stop playback
To stop p layb ac k and switc h over to the rad io mod e, p ress the
“ BAND ” b utton. To stop p layb ac k and switc h over to the c a ssette
p layer mod e, p ress the “TAPE ” b utton.

Page 211 of 453

Audio5-25

CONTINUED –
n
When cassette tape is in the player
When the “TAPE ” b utton 9 is p ressed , the d isp lay will show “PLAY ”
and the p layer will start p layb ac k. Tape travel indicators
These ind ic ate the d irec tion the c assette tap e is m oving .
: ind ic ates that the top sid e of the c assette is b eing p layed b ac k.
: ind ic ates that the b ottom sid e of the c assette i s b eing p layed
b ac k. Program switching button (PROG)
When the p rog ram switc hing b utton “PROG ”
I is p ressed d uring
p layb ac k, the tap e travel ind ic ators will switc h an d the p layer will b e-
g in p laying b ac k the op p osite sid e of the tap e. The same mec hanism
is automatic ally ac tivated when the end of the tap e is reac hed . This
allows the op p osite sid e of the tap e to p lay, p rovi d ing c ontinuous
p layb ac k. Fast-forward button (FF)
To fast-forward the tap e, p ress the “FF ” b utton
T. The d isp lay will
show “FF ”. To stop fast-forward ing , p ress the “FF ” or “TAPE ” 9 b utton.
Rewind button (REW)
To rewind the tap e, p ress the “REW ” b utton Y. The d isp lay will ind i-
c ate “REW ”. To stop rewind ing , p ress the “REW ” or “TAPE ” 9 b utton.
Eject button (
)
When “
” b utton W is p ressed , p lay b ac k stop s and the c assette
tap e is ejec ted .
The ejec tion func tion also op erates when the ig niti on switc h is in the
“ LOCK ” p osition. Always make c ertain that you remove the c assette
tap e. Tape program sensor button (TPS)
n Blank skip
When the “TPS ” b utton
E is p ressed , the “TPS ” ind ic ator will c ome on
and the p layer will automatic ally skip any b lank p o rtion of 15 sec ond
or more and p lay the next p rog ram, even if it is on the other sid e. To
c anc el b lank skip mod e, p ress the “TPS ” b utton ag ain.

Page 214 of 453

5-28After insertion, the DISC ind ic ator

” will c ome on and “CD ” will
ap p ear on the d isp lay and the p layer will start p la yb ac k.
NOTE Make sure to always insert a disc with the label side up. If a
disc is inserted with the label side down, it might be ejected or the player might shut off. After the last song finishes, the player will automatically return
to track 1 (the first song on the disc). n When CD is in the player
Press the “CD ” b utton
G. The d isp lay will show “CD ” and the p layer
will start p layb ac k. NOTE After the last song finishes, playback will automatically return to track 1 (the first song on the disc). To select a song from its beginning
n Forward direction
Briefly p ress the “ ❚” b utton
F to skip to the b eg inning of the next
trac k. Eac h time the b utton is p ressed , the ind ic at ed trac k numb er will
inc rease. n Backward direction
Briefly p ress the “❚ ” b utton
F to skip to the b eg inning of the c ur-
rent trac k. Eac h time the b utton is p ressed , the in d ic ated truc k num-
b er will d ec rease. Fast forwarding and fast reverse
n Fast forwarding
Press the “ ❚” b utton F c ontinuously for more than 0.5 sec ond to
fast forward the d isc .
Release the b utton to stop fast forward ing . n Fast reverse
Press the “❚ ” b utton F c ontinuously for more than 0.5 sec ond to
fast reverse the d isc .
Release the b utton to stop fast reverse.

Page 218 of 453

5-32
Fast forwarding and fast reverse
n Fast forwarding
Press the “ ❚” b utton Z c ontinuously for more than 0.5 sec ond to
fast forward the d isc .
Release the b utton to stop fast forward ing .
If you c ontinue fast forward ing to the end of the d isc , the CD c hang er
will automatic ally stop fast forward ing and start p layb ac k b eg inning
with the first trac k on the c urrent d isc . n Fast reverse
Press the “❚ ” b utton
Z c ontinuously for more than 0.5 sec ond to
fast reverse the d isc .
Release the b utton to stop fast reverse.
If you c ontinue fast reverse to the b eg inning of th e d isc , the CD
c hang er will automatic ally stop fast reverse and st art p layb ac k b eg in-
ning with the first trac k on the c urrent d isc . Repeat playback
Press the “RPT ” b utton
L while a song is p laying to p lay the song
rep eated ly. The “RPT ” ind ic ator will c ome on and the song will b e
p layed c ontinuously. To c anc el the rep eat mod e, p re ss the b utton
ag ain. Then the “RPT ” ind ic ator g oes out, and normal p layb ac k mod e
is restored . Random playback
Press the “RAND ” b utton
K while a d isc is b eing p layed b ac k to p lay
all song s on the d isc in a rand om ord er. The “RAND ” ind ic ator will
c ome on and all song s on the d isc will b e p layed in a rand om ord er.
To c anc el the rand om mod e, p ress the b utton ag ain. Then the
“ RAND ” ind ic ator g oes out, and normal p layb ac k mod e is re stored .
Scan
When the “SCAN ” b utton
H is p ressed while the d isc is b eing p layed
b ac k, you c an hear the first 10 sec ond s of eac h tra c k to searc h for
the d esired p rog ram. To c ontinue listening to the p rog ram, p ress the
“ SCAN ” b utton ag ain. After all trac ks on the d isc have b e en sc anned ,
normal p layb ac k mod e is restored .

Page 230 of 453

5-44Cassette player operation
HB5045CB
9 Cassette slot
Q Ejec t b utton
W TAPE (c assette p layer
selec tion) b utton
E Rep eat b utton R
Fast forward b utton
T Play b utton
Y Rewind b utton
U Prog ram switc hing b utton
I Dolb y B NR b utton
If a c assette is inserted into the c assette slot wh ile the ig nition switc h is
in the ACC or the ON p osition, that tap e will start to p lay automatic ally.
Press the TAPE b utton when you want to p lay a c asse tte that has p re-
viously b een inserted .
Cassette tape stop and eject button
When “
” b utton is p ressed , p layb ac k stop s and the c assette tap e
is ejec ted .
Before the ig nition switc h is turned to the “OFF ” p osition, ejec t the
tap e from the p layer. Always make c ertain that you remove the c as-
sette tap e.

Page 241 of 453

Audio5-55

CONTINUED –
n
When CD is in the player
When the “ /❚❚ ” b utton 6 is p ressed , the p layer will start p layb ac k.
NOTE After the last song finishes, the player will automatically return to track 1 (the first song on the disc). To stop playback of a CD
When the “ /❚❚ ” b utton 6 is p ressed d uring p layb ac k of a CD, the
CD stop s p laying temp orarily. To let the CD resume p laying , p ress the
b utton ag ain. To select a song from its beginning
n Forward direction
Briefly p ress the “ ❚” b utton 5 to skip to the b eg inning of the next
trac k. Eac h time the b utton is p ressed , the ind ic at ed trac k numb er will
inc rease. n Backward direction
Briefly p ress the “❚ ” b utton 7 to skip to the b eg inning of the c ur-
rent trac k. Eac h time the b utton is p ressed , the in d ic ated truc k num-
b er will d ec rease. Fast forwarding and fast reverse
n Fast forward
Press the “ ❚” b utton 5 c ontinuously for more than 0.5 sec ond to
fast forward the d isc .
Release the b utton to stop fast forward ing . n Fast reverse
Press the “❚ ” b utton
7 c ontinuously for more than 0.5 sec ond to
fast reverse the d isc .
Release the b utton to stop fast reverse. Repeat playback
Use this to p lay a c ertain trac k rep eated ly. During p layb ac k, p ress the
“ RPT/RDM ” b utton
2 and release it in less than 2 sec ond s. The “RPT ”
ind ic ator will c ome on and the song will b e p layed c ontinuously. To

Page 264 of 453

7
Starting and operating Fuel7-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel requirements 7-2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Fuel filler lid and cap 7-4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
State emission testing (U.S. only) 7-6 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preparing to drive 7-8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the engine 7-8
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Starting the engine for a manual transmission vehicle 7-8 . . . . . . . . . .
Starting the engine for an automatic transmission vehicle 7-9 . . . . . .
Starting the engine during cold weather below –4F ( –20 C) 7-10 . . .
Starting a flooded engine 7-10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Stopping the engine 7-10
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual transmission 7-11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatic transmission 7-14
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selector lever for automatic transmission 7-15 . . . . . . . . . . . . . . . . . . . . . . . . . .
Shift lock release 7-19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear viscous limited slip differential (LSD) (if equipped) 7-20 . . .
Power steering 7-20
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Braking 7-21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Braking tips 7-21
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Brake system 7-22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Disc brake pad wear warning indicators 7-22 . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ABS (Anti-lock Brake System) 7-23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
VDC (Vehicle Dynamics Control) system (if equipped) 7-25 . . . . . .
Parking your vehicle 7-31
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cruise control (if equipped) 7-33 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Page 271 of 453

7-8
Preparing to drive
You should p erform the following c hec ks and ad justm
ents every d ay b e-
fore you start d riving .
1. Chec k that all wind ows, mirrors, and lig hts are c lean and unob -
struc ted .
2. Chec k the ap p earanc e and c ond ition of the tires. Also c hec k tires for
p rop er inflation.
3. Look und er the vehic le for any sig n of leaks.
4. Chec k that the hood , trunk and rear g ate are full y c losed .
5. Chec k the ad justment of the seat.
6. Chec k the ad justment of the insid e and outsid e mi rrors.
7. Fasten your seatb elt. Chec k that your p asseng ers have fastened their
seatb elts.
8. Chec k the op eration of the warning and ind ic ator lig hts when the ig ni-
tion switc h is turned to the “ON ” p osition.
9. Chec k the g aug es, ind ic ator and warning lig hts af ter starting the en-
g ine. NOTE Engine oil, engine coolant, brake fluid, washer fluid and other fluid
levels should be checked daily, weekly or at fuel stops.
Starting the engine
CAUTION
Do not operate the starter motor continuously for more than ten
seconds. If the engine fails to start after operating the starter forfive to ten seconds, wait for ten seconds or more before tryingagain.
Starting the engine for a manual transmission vehicle
1. Ap p ly the p arking b rake.
2. Turn off unnec essary lig hts and ac c essories.

Page 273 of 453

7-10If the eng ine d oes not start within ten sec ond s, wa
it a while and then turn
the ig nition switc h to the “START ” p osition ag ain while d ep ressing the ac -
c elerator p ed al half way d own.
6. Confirm that all warning and ind ic ator lig hts hav e g one out after the
eng ine has started . The fuel injec tion system autom atic ally lowers the
id le sp eed as the eng ine warms up .
While the eng ine is warming up , make sure that the selec tor lever is at
the “P ” or “N ” p osition and that the p arking b rake is ap p lied .
Starting the engine during cold weather below –4F
(–20 C)
If the eng ine is d iffic ult to start using the norma l method (without d e-
p ressing the ac c elerator p ed al), turn the ig nition switc h to the “START ”
p osition while slig htly d ep ressing the ac c elerator p ed al.
Starting a flooded engine
If the eng ine d oes not start, it may b e flood ed (ex c essive fuel in the en-
g ine).
In c ase of a flood ed eng ine, turn the starter motor for five sec ond s with
the ac c elerator p ed al fully d ep ressed . Rep eat this two or three times until
the eng ine starts. Release the ig nition switc h and ac c elerator p ed al as
soon as the eng ine starts.
Stopping the engine
WARNING
Do not stop the engine when the vehicle is moving. This will
cause loss of power to the power steering and the brake booster, making steering and braking more difficult. It could also result in
accidental activation of the “LOCK” position on the ignition
switch, causing the steering wheel to lock.
The ig nition switc h should b e turned off only when the eng ine is id ling .

Page 274 of 453

Starting and operating7-11

CONTINUED –
Manual transmission
WARNING
Do not drive the vehicle with the clutch disengaged (i.e., when the clutch pedal is depressed) or with the shift lever in the neutralposition. Engine braking has no effect in either of these condi-tions and the risk of an accident is consequently increased.
CAUTION
Shift into reverse ONLY when the vehicle has completelystopped. It may cause damage to the transmission to try shiftinginto reverse when the vehicle is moving.
The manual transmission is a fully sync hromeshed 5- forward and 1-re-
verse sp eed transmission.
OM-H2241
The shift p attern is shown on the shift lever knob . When shifting from 5th
g ear to reverse g ear, first return the shift lever to the neutral p osition then
shift into reverse g ear.
To c hang e g ears, fully d ep ress the c lutc h p ed al, mo ve the shift lever,
and g rad ually let up on the c lutc h p ed al.
If it is d iffic ult to shift into g ear, p ut the tran smission in neutral, release the
c lutc h p ed al momentarily, and then try ag ain.

Page:   < prev 1-10 11-20 21-30 31-40 next >