display SUBARU OUTBACK 2016 6.G Navigation Manual

FUNCTION INDEX
35
1
QUICK GUIDE
XRoute guidance*
*: With navigation function
Before starting or during route guidance Page
Starting route guide 222
Editing the route 230
Viewing the entire route map 226
Adjusting route guidance volume 193
Deleting the destination 231
XUseful functions
Information Page
Displaying vehicle maintenance 196
Hands-free system (for cellular phone) Page
Registering/connecting Bluetooth phone 174
Making a call on a Bluetooth phone 118
Receiving a call on the Bluetooth phone 124
Voice recognition system Page
Operating the system with your voice 255

BASIC INFORMATION BEFORE OPERATION
38
BASIC INFORMATION BEFORE OPERATION
INITIAL SCREEN
INITIAL SCREEN
WARNING
OWhen the vehicle is stopped with the engine running, always
apply the parking brake for safety.
1. When the ignition switch is in the “ACC” or “ON”
position, the initial screen will be displayed and the
system will begin operating.

”After a few seconds, the “CAUTION (CAUTION)”
screen will be displayed.
2. Select I Agree (I Agree).

”After about 5 seconds, the “CAUTION (CAUTION)”
screen automatically switches to the next screen.

”With navigation function: Select
Language
(Language) to select a language.
XWith navigation function
3. Select Accept (Accept).

BASIC INFORMATION BEFORE OPERATION
46
Operation method Outline Main use
Rotate*1
To change the
map direction,
rotate with two
¿QJHUVWRXFKLQJ
the screen.Changing the
horizontal
display angle of
the map.
*1: With navigation function
*2: The above operations may not be performed on all screens.
NOTE
OFlick operations may not be performed smoothly in high
altitudes.
TOUCH SCREEN OPERATION
This system is operated mainly by the buttons on the
screen. (Referred to as screen buttons in this manual.)

”When a screen button is touched, a beep sounds.
7KHEHHSVRXQGFDQEHWXUQHGRQRURII
:3
CAUTION
OTo prevent damaging the screen, lightly touch the screen
EXWWRQVZLWK\RXU

BASIC INFORMATION BEFORE OPERATION
48
CUSTOMIZING THE SPLIT SCREEN
The display items/area on the split screen can be changed.
XFrom the split screen
1. Select .
XFrom the “SETTINGS (SETTINGS)” screen
1. Select Split Screen (Split Screen) on the “SETTINGS
6(77,1*6

BASIC INFORMATION BEFORE OPERATION
50
CHARACTER JUMP BUTTONS IN LISTS
Some lists contain character screen buttons, ABC (ABC),
DEF (DEF) etc., which allow a direct jump to list entries
that begin with the same letter as the character screen
button.
1. Select the desired character jump buttons.
NOTE
OEvery time the same character screen button is selected, the list
starting with the subsequent character is displayed.
SORTING (WITH NAVIGATION FUNCTION)
The order of a list displayed on the screen can be sorted in
the order of name, distance, detour, etc.
1. Select More (More).
2. Select the desired sorting criteria.

BASIC INFORMATION BEFORE OPERATION
51
BASIC FUNCTION
2
SCREEN ADJUSTMENT
The brightness, contrast, tone and color of the screen can
be adjusted.
1. Select .
2. Select SETTINGS (SETTINGS).
3. Select Display (Display).
4. Select the items to be set.
No. Function
Select to adjust the general screen display.
Select to adjust the camera display.
Select to adjust the video display.
5. Select the desired item to be adjusted.
XGeneral
XCamera

BASIC OPERATION
54
BASIC OPERATION
SOME BASICS
This section describes some of the basic features of the
audio/visual system. Some information may not pertain to
your system.
Your audio/visual system works when the ignition switch is
turned to the “ACC” or “ON” position.
CAUTION
OTo prevent the battery from being discharged, do not leave
the audio/visual system on longer than necessary when the
engine is not running.
TURNING THE SYSTEM ON AND OFF
“POWER/VOLUME” knob: Press to turn the audio/visual
system on and off. The system turns on in the last mode
used. Turn this knob to adjust the volume.
“AUDIO/TUNE” knob: Press to display screen buttons for
the audio/visual system.

”A function that enables automatic return to the split
screen from the audio/visual screen can be selected.

:3

BASIC OPERATION
55
AUDIO
3
SELECTING AN AUDIO SOURCE
1. Press the “AUDIO/TUNE” knob.

”The screen can also be displayed by selecting
followed by
AUDIO (AUDIO).

”If the audio control screen appears, select
Source
(Source) on the audio screen or press the “AUDIO/
TUNE” knob again.
2. Select the desired source.
NOTE
OWhen there are two pages, select or to change the page.
REORDERING THE AUDIO SOURCE
1. Display the “Select Audio Source (Select Audio Source)”
VFUHHQ
:3
2. Select Reorder (Reorder).
3. Select the desired audio source then or to
reorder.
4. Select OK (OK).

BASIC OPERATION
58
QSAVING THE SOUND QUALITY
You can save the adjusted sound quality settings.
1. Adjust the sound quality.
2. Select EQ1 (EQ1) or EQ2 (EQ2) for 2 seconds or
more.

”Values cannot be saved for
FLAT (FLAT).
QUSING A PRESET SOUND QUALITY
1. Select EQ1 (EQ1) or EQ2 (EQ2) to activate the
corresponding preset sound quality.

”To reset the sound quality, select
FLAT (FLAT).

”This function can also be used at the “EQ Settings
(EQ Settings)”.
QRESETTING THE EQ CURVE
You can return the adjusted value for the currently stored
equalizer to its initial value.
1. Select and hold FLAT (FLAT) for 2 seconds or more.

”The adjusted values for the stored
EQ1 (EQ1) and
EQ2 (EQ2) are returned to their initial values.
AUDIO SCREEN ADJUSTMENT
The screen size can be selected for each type of media.
XUSB video/SD video*
*: With navigation function
1. Select on the audio control screen.
2. Select Screen Format (Screen Format).
3. Select the desired item to be adjusted.
No. Function
Select to display a screen with either side in black.
Select to enlarge the image horizontally to full screen.
Select to enlarge the image by the same ratio
horizontally and vertically.

BASIC OPERATION
59
AUDIO
3
XMirrorLinkTM
1. Select Screen Format (Screen Format) on the
application list screen.
2. Select the desired item to be adjusted.
No. Function
Select to display a screen surrounded by black on all
four sides.
Select to enlarge the image horizontally and vertically to
full screen.
Select to enlarge the image horizontally or vertically.
NOTE
OThe brightness, contrast, tone and color of the audio screen can
EHFKDQJHG
:3
VOICE RECOGNITION SYSTEM
1. Press this switch to operate the voice recognition
system.

”The voice recognition system and its list of
FRPPDQGVFDQEHRSHUDWHG
:3