phone SUBARU OUTBACK 2016 6.G Navigation Manual

OTHER SETTINGS
198
DEALER SETTING
Dealer information can be registered in the system.
1. Select Set Dealer (Set Dealer).
2. Select the items to be edited.
No. Function Page
Select to enter the name of a dealer. 198
Select to enter the name of a dealer member. 198
Select to enter the phone number. 198
Select to delete the dealer information
displayed on the screen.-
QEDITING DEALER OR CONTACT NAME
1. Select next to “Dealer (Dealer)” or “Contact
(Contact)”.
2. Enter the name and then select OK (OK).
QEDITING PHONE NUMBER
1. Select next to “Phone # (Phone #)”.
2. Enter the phone number and then select OK (OK).

BASIC OPERATION
202
No. Operation Function
Point
informationSelect to open another screen
displaying information on the
selected map position (cursor). When
Bluetooth is enabled on your cellular
phone, a call can be placed if the
displayed information screen contains
phone number information.
Return to
normal
navigationSelect to return the map to the current
GPS position. Auto map rotation is
also enabled. The map operation
buttons are not displayed, and
navigation restarts.
Tilt up/downSelect to change the vertical display
angle of the map in 3D mode. Select
and hold to continue changing the
motion of the map screen.
No. Operation Function
Selecting a
destinationSelect to select the cursor as a new
destination. The route is researched
automatically.
Additional
functionsSelect to display the additional
functions list. For example, saving
the cursor to the destination list, and
searching the area around the cursor.
Zoom in/outSelect to change the area of the map
displayed on the screen. Select and
hold to continue changing the scale of
the map screen.
NOTE
OThe map screen scale can be changed by double-touching or
SLQFKLQJWKHVFUHHQ
:3
OThe map direction can be changed by rotating the screen.

:3

Siri
252
Siri
Siri®
Siri is a function that allows your iPhone and iPod touch to
be used without any manual operation by connecting your
device to the unit.
To use Siri, connect your device via Bluetooth.
BEFORE USING Siri
This section describes the preparation required to use Siri.

”Register your iPhone or iPod touch in the unit.

:3

”Connect your iPhone or iPod touch to the unit.

:3
‡When using the hands-free system, turn Phone on
(Connected).
‡When listening to music, turn Phone and Audio
device on (Connected).

”Enable Siri in your iPhone or iPod touch settings.
(See Apple website for details.)
”An iPhone and iPod touch data plan: If the data plan
for your iPhone and iPod touch does not provide for
unlimited data usage, additional charges from your
carrier may apply for accessing app-based connected
content via 3G, 4G, Wi-Fi, or 4G LTE wireless
networks.

”Connection to the internet via 3G, 4G, Wi-Fi, or 4G
LTE networks.
NOTE
OAvailable operations will differ based on your iPhone and iPod
touch.
OBe careful not to exceed the data usage limits for your iPhone
and iPod touch. Doing so will result in additional data usage
charges from your phone carrier.

Siri
253
Siri/VOICE RECOGNITION SYSTEM
9
USING Siri
STEERING SWITCH
Talk switch

”Press and hold the talk switch to start Siri.

”To cancel Siri, press and hold the talk switch.
MICROPHONE

”It is unnecessary to speak directly into the
microphone when using Siri.
Siri OPERATION
1. Press and hold the talk switch.
2. Speak when you hear the beep sound.

Siri
254
”If required to say more, the system will notify you with
the beep sound. Continue speaking.

”If the system fails to recognize what is being said, or
to request a different operation, select
, or press
the talk switch.

”To cancel Siri, select
Cancel (Cancel), or press and
hold the talk switch.
NOTE
OSiri cannot be started while placing or receiving hands-free
calls with your iPhone and iPod touch (including while holding
incoming calls), or while having a hands-free conversation.
OSiri cannot be used while using the system's voice recognition
function. Start Siri after exiting the voice recognition function.
OThe system screen will display the calling screen when a hands-
free call is placed.
OUnit operation while using Siri will differ depending on your
iPhone or iPod touch.
OSiri may not recognize what is being said if:
‡Spoken too quickly.
‡Spoken at a low or high volume.
‡Driving with a window open.
‡Passengers are talking while using Siri.
‡The air conditioning speed is set high.
‡When air from the ventilator blows directly toward the
microphone.
NOTE
OIn the following conditions, the system may not recognize what is
being said properly, and use of Siri may not be possible.
‡What is being said is incorrect or unclear. Note that certain
ZRUGV DFFHQWV RU VSHHFK SDWWHUQV PD\ EH GLI

VOICE RECOGNITION SYSTEM OPERATION
255
Siri/VOICE RECOGNITION SYSTEM
9
VOICE RECOGNITION SYSTEM OPERATION
VOICE RECOGNITION SYSTEM
The voice recognition system enables the navigation,
audio, hands-free systems, etc. to be operated using voice
commands.
Refer to the command list for samples of voice commands.

:3
USING THE VOICE RECOGNITION SYSTEM
STEERING SWITCH
Talk switch

”Press the talk switch to start the voice recognition
system.

”To cancel voice recognition, press and hold the talk
switch or the source switch.
MICROPHONE

”It is unnecessary to speak directly into the
microphone when giving a command.
NOTE
O:<0044004c0057000300490052005500030057004b0048000300460052005100bf0055005000440057004c0052005100030045004800480053000300450048004900520055004800030056005300480044004e004c0051004a00030044000300460052005000
500044005100470011>
OVoice commands may not be recognized if:
‡Spoken too quickly.
‡Spoken at a low or high volume.
‡Driving with a window open.
‡Passengers are talking while voice commands are spoken.
‡The air conditioning speed is set high.
‡When air from the ventilator blows directly toward the
microphone.

VOICE RECOGNITION SYSTEM OPERATION
258
NOTE
OWhile the recognition data is being created or being updated, a
track search cannot be performed using a voice command.
VOICE COMMAND EXAMPLE: CALL NAME
1. Press the talk switch.
2. Say “Call <contacts> <phone types>”.

”If multiple matching items are found, a selection
screen will be displayed. Say “<number>” or select
the number.
NOTE
OIn the same manner as it is displayed on the screen, “Call
<contacts> <phone types> (Call <contacts> <phone types>)”,
after saying “Call a contact” say the name, or the name and
type of phone, of a contact.
For example: “Call a contact”, “John Smith” or “Call a
contact”, “Mary Davis”, “Mobile”
OThere are 4 types of phones: Home, Mobile, Work and Other.
OShort or abbreviated names in the contacts list may not be
recognized. Change names in the contacts list to full names.
O6RPHWLPHVDYRLFHUHFRJQLWLRQUHVXOWFRQ

VOICE RECOGNITION SYSTEM OPERATION
260
EXPRESSION EXAMPLES FOR EACH FUNCTION
Command Expression examples
Call by specifying
contactPhone the <phonetypes> number of
<contacts>.
Ring <contacts> ’s <phonetypes>
number.
Call by specifying
phone numberPhone <phone number>.
Search artists to
listen to songPut on the artist <name>.
Listen to the singer <name>.
Search album names
to listen to songListen to <name> album.
Play me the album <name>.
Use navigation
function*Go to GPS.
Go to address entry.
*: With navigation function

COMMAND LIST
262 XCommands for changing the audio mode
Voice command Phrase Function
AM mode
changeplay AM, select AMSwitch to AM
mode
FM mode change play FM, select FMSwitch to FM
mode
SiriusXM radio
mode change play XM, select XMSwitch to SiriusXM
mode
CD mode change play CD, select CDSwitch to CD
mode
USB mode
changeplay USB, select USBSwitch to USB
mode
SD mode
change*play microSD, select
microSDSwitch to SD
mode
iPod mode
changeplay iPod, select iPodSwitch to iPod
mode
AUX mode
changeselect AUXSwitch to AUX
mode
Audio off mode
changeaudio off, turn off audio Turn off the Audio
Audio on mode
changeaudio on, turn on audio Turn on the Audio
*: With navigation function
XCommands for changing the mode
Voice command Phrase Function
Hands-free mode
change[go to] phone, phone
screen, phone menuSwitch to HF mode
Audio mode
changego to audioSwitch to audio
mode
aha mode
changego to ahaSwitch to aha
mode
Pandora*
1 mode
changego to PandoraSwitch to Pandora
mode
Climate mode
change[go to] AC, [go to]
climate controlSwitch to climate
mode
Navigation mode
change*
2
navigation,
go to navigation,
go to NAV systemSwitch to the voice
command on NAV
system
*1: Pandora is available in the United States, Australia, and New Zealand.
*2: With navigation function

COMMAND LIST
263
Siri/VOICE RECOGNITION SYSTEM
9
XCommands for Hands-free
Voice command Phrase Function
Redialredial, call again, dial
againPlaces a call to the
phone number of
the latest outgoing
call
Call backcall back, return phone
callPlaces a call to the
phone number of
latest incoming call
Recent calls [show] recent callsDisplays the call
history screen
Dial number
callingcall <phone number>,
dial <phone number>Places a call to
the said phone
number
Call by name
and typecall <contacts>
<phonetypes>,
dial <contacts> on
<phonetypes>Place a call to the
said phone type of
the contact from
the phone book
List messagelist messages, list
<messagetypes>
messagesDisplays e-mails
Call call
This can be used
when receiving
messages Ignore ignore
Read read
Reply reply
XCommands for Pandora*
*: Pandora is available in the United States, Australia, and New Zealand.
Voice command Phrase Function
Pandora mode
changeplay Pandora stationsSwitch to Pandora
mode
List Pandora
stationslist Pandora stationsList Pandora
stations
Thumb up like, thumbs up0DUN³/LNH´ÀDJ
Thumb down dislike, thumbs down0DUN³'LVOLNH´ÀDJ
and skip to the
next song
XCommands for aha
Voice command Phrase Function
aha mode
changeplay aha stationsSwitch to aha
mode
List aha stations list aha stations List aha stations
Like on/offlike/unselect like,
thumbs up/unselect
thumbs up0DUN³/LNH´ÀDJ
Unmark it