display SUBARU OUTBACK 2017 6.G Multimedia System Manual

SETUP
244
No.Function
Select to adjust the standard zoom and the angle of tilt.
You can set the level in three stages.
Select to turn the auto zoom function on or off.
Select to automatically reduce the scale of the 2D map
to display the entire route.
Select to select the screen color used in daytime mode.
Select to select the screen color used in nighttime mode.
Select to select the switches that display on the map.
Select to turn the path log save function on or off (saves
in positional order for each trip).
Select a spot displayed on the map during navigation.
Select the check box to show or hide the spot category.
Select the spot category name to open a sub-category.
More (More): Select to save the currently displayed
spot position, or read spot displays saved previously.
You can also restore the default display settings.

” By turning ON the “Auto Zoom (Auto Zoom)” function,
“Viewpoint (Viewpoint)” and “Automatic Overview
(Automatic Overview)” cannot be set.
UNITS AND FORMATS
Sets the units used by the program to measure distance.
You can select to display the time in various international
date formats.
1.'LVSOD\WKH

SETUP
246
No.Function
Displays service area information while driving on the
expressway. Select to turn this function on and off.
Select to select the service area information display
items.
When information is available, lane information similar to
RYHUKHDGURDGWUDI¿FVLJQVLVGLVSOD\HGDWWKHWRSRIWKH
map. Select to turn this function on and off.
When approaching an expressway exit or a complicated
intersection, the map switches to a 3D display if the
necessary information can be displayed. Select to turn
this function on and off.
Select to turn on the route progress bar which is
displayed as a straight line to the left of the map. This
shows the progress made on the current route. When
a blue arrow is used to indicate position, the arrow
continues to rise as you drive towards your destination.
:D\SRLQWVDQGWUDI

TIPS FOR THE NAVIGATION SYSTEM
247
NAVIGATION SYSTEM
8
TIPS FOR THE NAVIGATION SYSTEM
GPS (GLOBAL POSITIONING
SYSTEM)
REGARDING ERRORS IN CURRENT
POSITION DISPLAY
The system displays the vehicle current position based on
GPS information and data from various sensors and road
maps. However, when the radiowave signals from GPS
satellites are weak or when signals are received from only
two satellites or less, errors may occur in the position.
Modifying or adjusting the system will not prevent these
errors.
LIMITATIONS OF THE NAVIGATION SYSTEM
This navigation system calculates the current position using
satellite signals, various vehicle signals, map data, etc.
However, an accurate position may not be shown depending
RQ VDWHOOLWH FRQGLWLRQV URDG FRQ

TIPS FOR THE NAVIGATION SYSTEM
248
CAUTION
OThe installation of window tinting may obstruct the GPS
signals. Most window tinting contains some metallic content
that will interfere with GPS signal reception of the antenna in
the instrument panel. We advise against the use of window
tinting on vehicles equipped with navigation systems.

” Accurate current position may not be shown in the
following cases:
‡When driving on a small angled Y-shaped road.
‡ When driving on a winding road.
‡ When driving on a slippery road such as in sand,
gravel, snow, etc.
‡ When driving on a long straight road.
‡ When freeway and surface streets run in parallel.
‡ After moving by ferry or vehicle carrier.
‡ When a long route is searched during high speed
driving.
‡ After repeating a change of direction by going
forward and backward, or turning on a turntable in
a parking lot.
‡ When leaving a covered parking lot or parking
garage.
‡ When a roof carrier is installed.
‡ When driving with tire chains installed. ‡
When the tires are worn.
‡ After replacing a tire or tires.
‡ When using tires that are smaller or larger than the
IDFWRU\VSHFL¿FDWLRQV
‡ When the tire pressure in any of the 4 tires is not
correct.

” Inappropriate route guidance may occur in the
following cases:
‡When turning at an intersection off the designated
route guidance.
‡ If you set more than 1 destination but skip any of
them, auto reroute will display a route returning to
the destination on the previous route.
‡ When turning at an intersection for which there is
no route guidance.
‡ When passing through an intersection for which
there is no route guidance.
‡ During auto reroute, the route guidance may not be
available for the next turn to the right or left.
‡ During high speed driving, it may take a long time
for auto reroute to operate. In auto reroute, a detour
route may be shown.
‡ After auto reroute, the route may not be changed.
‡ If an unnecessary U-turn is shown or announced.

Siri
254
”
If required to say more, the system will notify you with
the beep sound. Continue speaking.

” If the system fails to recognize what is being said, or
to request a different operation, select
, or press
the talk switch.

” To cancel Siri, select
Cancel (Cancel), or press and
hold the talk switch.
NOTE
O Siri cannot be started while placing or receiving hands-free
calls with your iPhone and iPod touch (including while holding
incoming calls), or while having a hands-free conversation.
O Siri cannot be used while using the system's voice recognition
function. Start Siri after exiting the voice recognition function.
O The system screen will display the calling screen when a hands-
free call is placed.
O Unit operation while using Siri will differ depending on your
iPhone or iPod touch.
O Siri may not recognize what is being said if:
‡ Spoken too quickly.
‡ Spoken at a low or high volume.
‡ Driving with a window open.
‡ Passengers are talking while using Siri.
‡ The air conditioning speed is set high.
‡ When air from the ventilator blows directly toward the
microphone.
NOTE
OIn the following conditions, the system may not recognize what is
being said properly, and use of Siri may not be possible.
‡ What is being said is incorrect or unclear. Note that certain
ZRUGV DFFHQWV RU VSHHFK SDWWHUQV PD\ EH GLI

VOICE RECOGNITION SYSTEM OPERATION
258
NOTE
OWhile the recognition data is being created or being updated, a
track search cannot be performed using a voice command.
VOICE COMMAND EXAMPLE: CALL NAME
1.Press the talk switch.
2.Say “Call <contacts> <phone types> ”.

” If multiple matching items are found, a selection
screen will be displayed. Say “<number>” or select
the number.
NOTE
O In the same manner as it is displayed on the screen, “Call
<contacts> <phone types> (Call <contacts> <phone types>)”,
after saying “Call a contact ” say the name, or the name and
type of phone, of a contact.
For example: “Call a contact ”,“John Smith ” or “Call a
contact ”,“Mary Davis ”,“Mobile ”
O There are 4 types of phones: Home, Mobile, Work and Other.
O Short or abbreviated names in the contacts list may not be
recognized. Change names in the contacts list to full names.
O 6RPHWLPHVDYRLFHUHFRJQLWLRQUHVXOWFRQ

COMMAND LIST
261
Siri/VOICE RECOGNITION SYSTEM
9
COMMAND LIST
Recognizable voice commands and their actions are shown
below.
”Frequently used commands are listed in the following
tables.

” For devices that are not installed in the vehicle, the
related commands will not be displayed in the screen.
Also, according to conditions, other commands may
not be displayed in the screen.

” The functions available may vary according to the
system installed.

” Voice recognition language can be changed.

:3
NOTE
O The notations used in the commands are as follows.
‡ >
|
|
|UUU]: Commands that need not to be spoken
‡ ‹UUU›: Numbers, titles, or names to be spoken
XBasic command
Voice command PhraseFunction
System pause pause Pause the current
voice interaction
System back [go] back Go back one
hierarchy
System cancel cancel Cancel the current
task
System help help Ask for help with
the current task
System start over start over Start the current
task over
Page change ¿UVWSDJHODVW
page, previous
page, next page Change display
page

COMMAND LIST
263
Siri/VOICE RECOGNITION SYSTEM
9
XCommands for Hands-free
Voice command PhraseFunction
Redial redial, call again, dial
again Places a call to the
phone number of
the latest outgoing
call
Call back call back, return phone
call Places a call to the
phone number of
latest incoming call
Recent calls [show] recent calls Displays the call
history screen
Dial number
calling call <phone number>,
dial <phone number> Places a call to
the said phone
number
Call by name
and type call <contacts>
<phone types>,
dial <contacts> on
<phone types> Place a call to the
said phone type of
the contact from
the phone book
List message list messages, list
<messagetypes>
messages Displays e-mails
Call call
This can be used
when receiving
messages
Ignore
ignore
Read read
Reply reply
XCommands for Pandora*
*: Pandora is available in the United States, Australia, and New Zealand.
Voice command PhraseFunction
Pandora mode
change play Pandora stations Switch to Pandora
mode
List Pandora
stations list Pandora stations List Pandora
stations
Thumb up like, thumbs up 0DUN³/LNH´ÀDJ
Thumb down dislike, thumbs down 0DUN³'LVOLNH´ÀDJ
and skip to the
next song
X
Commands for aha
Voice command PhraseFunction
aha mode
change play aha stations Switch to aha
mode
List aha stations list aha stations List aha stations
Like on/off like/unselect like,
thumbs up/unselect
thumbs up 0DUN³/LNH´ÀDJ
Unmark it

COMMAND LIST
270
Voice commandPhraseFunction
History >¿QG@>LQ@KLVWRU\ Sets the
destination from
the search history
results
Less less Reduces the
detour distance set
(on the avoid route
screen)
Line 1 [line] 1
Selects the item
OLVWHGLQWKH¿UVW
line of the list
(on the screen
where the list is
displayed)
¿UVW>OLQH@
Line 2 [line] 2
Selects the item
listed in the
second line of the
list (on the screen
where the list is
displayed)
second [line]Voice command
PhraseFunction
Line 3 [line] 3
Selects the item
listed in the third
line of the list
(on the screen
where the list is
displayed)
third [line]
Line 4 [line] 4
Selects the item
listed in the fourth
line of the list
(on the screen
where the list is
displayed)
fourth [line]
Middle [go, jump, move, scroll]
[to] [the] middle Transits to the
middle of the list
(on the screen
where the list is
displayed)
More more Transits to the
information list
reception screen

COMMAND LIST
276
Voice commandPhraseFunction
To p [go, jump, move, scroll]
[to] [the] top Transits to the top
of the list (on the
screen where the
list is displayed)
Up [page, scroll, move] up Moves the list one
page up (on the
screen where the
list is displayed)
Waypoint waypoint Registers
the selected
destination as a
relay point
Where am I where am I Displays the
vehicle position
information (When
there is a self-car
location in the
location besides
the road, this
function can’t be
used.)Voice command
PhraseFunction
Ye s yes
Accepts questions
or other contents
spoken to you
yep
yeah
*: Searches for candidates close to your vehicle’s position.

”
Commands on the touch screen that cannot be
operated have their colors toned down.