navigation SUBARU OUTBACK 2017 6.G Multimedia System Manual

SETUP
99
AUDIO
3
No.Function Page
Select to specify the sound settings. 56
Select to change the number of preset radio
stations/channels displayed on the screen. 99
Select to specify the iPod/SD*1/USB auto play
settings on/off. -
Select to specify the iPod sound signal input
settings.100
Unsupported.
-
Select to specify cover art settings on/off. -
*2Select to specify automatic sound levelizer
settings.100
Select to enable cache radio.
-
Select to reset all setup items. -
*1: With navigation function
*2 7KLVVHWWLQJFDQEHPDGHGHSHQGLQJRQWKHFRQQHFWHGDPSOL

TIPS FOR OPERATING THE AUDIO/VISUAL SYSTEM
107
AUDIO
3
SD CARD (WITH NAVIGATION FUNCTION)
SD cards that are marked as follows can be used.

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 4
PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
QUICK REFERENCE
The phone top screen can be used to make a phone call. To
display the hands-free operation screen, select
and
then select
PHONE (PHONE), select *, or press
the
switch on the steering wheel.
Several functions are available to operate on each screen
that is displayed by selecting the 4 tabs.
*: Without navigation function
Function Page
Phone
operation Registering/connecting Bluetooth phone 174
Calling on the Bluetooth phone
118
Receiving on the Bluetooth phone 124
Talking on the Bluetooth phone 125
Message
function Using the Bluetooth phone message
function
127
Setting up
a phone Phone settings
133
Bluetooth settings 179

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 8
WHEN SELLING OR DISPOSING OF THE
VEHICLE
A lot of personal data is registered when the hands-free
system is used. When selling or disposing of the vehicle,
LQLWLDOL]HWKHGDWD
:3
”The following data in the system can be initialized:
‡Contact data
‡ Call history data
‡ Speed dial data
‡ Image data
‡ All phone settings
‡ Message settings
NOTE
O Once initialized, the data and settings will be erased. Pay close
attention when initializing the data.
CALLING ON THE Bluetooth
PHONE
After a Bluetooth phone has been registered, a call can
be made using the hands-free system. There are several
methods by which a call can be made, as described below.
X Without navigation function
1.Select.
2.Select the desired tab to call from.

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
11 9
PHONE
4
XWith navigation function
1.Select.
2.SelectPHONE (PHONE).
3.Select the desired tab to call from.

”
The phone top screen can be displayed by pressing
the switch on the steering wheel.
How to make a call list Page
By speed dial list 120
By call history 120
By contacts list 121
By dial pad*
1122
By e-mail/SMS/MMS 131
By POI call*
2201
By off hook switch 123
By voice recognition system 258
By split screen 123
*1: The operation cannot be performed while driving.
*2: With navigation function

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
127
PHONE
4
3.SelectOK (OK).
NOTE
O
The sound quality of the voice heard from the other party’s
speaker may be negatively impacted.
O To reset the transmit volume, select
Default (Default).
O The volume cannot be adjusted while muted.
INCOMING CALL WAITING
When a call is interrupted by a third party while talking, this
screen is displayed.
1.Select or press the switch on the steering
wheel to start talking with the other party.
To refuse to receive the call: Select or press the switch on the steering wheel.

”Select
or press the switch on the steering
wheel to end the current call and return to the
conversation with the party on hold.
Bluetooth PHONE MESSAGE
FUNCTION
Received messages can be forwarded from the connected
Bluetooth phone, enabling checking and replying using the
system.
Depending on the type of Bluetooth phone connected,
received messages may not be transferred to the message
inbox.
If the phone does not support the message function, this
function cannot be used.
X Without navigation function
1.Select.
2.Select.

” The phone top screen can be displayed by pressing
the
switch on the steering wheel.

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
128
3.Check that the message inbox screen is displayed.
X With navigation function
1.Select.
2.SelectPHONE (PHONE).
3.Select.

” The phone top screen can be displayed by pressing
the
switch on the steering wheel.
4.Check that the message inbox screen is displayed.

” : Select to change to phone mode.
Function Page
Receiving a message 129
Checking messages 129
Replying to a message (quick reply) 130
Calling the message sender 131
Message settings 142

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
131
PHONE
4
4.Select the desired message.
5.SelectSend (Send).

” While the message is being sent, a sending message
screen is displayed.
EDITING QUICK REPLY MESSAGES
This operation cannot be performed while driving.
1.SelectQuick Message (Quick Message).
2.Select corresponding to the desired message to
edit.
3.SelectOK (OK) when editing is completed.
NOTE
O
To reset the editquick reply messages, select Default(Default).
O “Quick Message 1” (
I'm driving right now. I will call you back later.
(I'm driving right now. I will call you back later.)*1 or
I am driving and will arrive in approximately [ETA] minutes. (I am
driving and will arrive in approximately [ETA] minutes.)*2)
cannot be edited. [ETA] will automatically be replaced with the
HVWLPDWHGWLPHRIDUULYDORQWKHFRQ¿UPPHVVDJHVFUHHQ
If there are waypoints set, [ETA] to the next waypoint will be
shown.
If there is no route currently set in the navigation system, “Quick
Message 1” cannot be selected.
*1: Without navigation function
*2: With navigation function
CALLING THE MESSAGE SENDER
Calls can be made to an e-mail/SMS/MMS message
sender’s phone number.
This operation can be performed while driving.

ahaTM by HARMAN
156
STATION OPERATION SCREEN BUTTONS
ButtonFunction
Select to start playback.
Select to pause playback.
Select to stop playback.
Select to upload “Like” information to the
application server. To cancel “Like” information
that is being uploaded to the server, select this
button again.
Select to upload “Dislike” information to the
application server. To cancel “Dislike” information
that is being uploaded to the server, select this
button again.
*Select to display the POI information on the map
VFUHHQDQGVHWLWDVDGHVWLQDWLRQ
:3
Select to call the registered number.
Select to upload your current location to your
social network.
Select to send your voice to the application
VHUYHU
:3
Button
Function
Select to refresh the content item information in
the current station.
Select to rewind the current content item for 15
seconds.
Select to fast forward the current content item for
30 seconds.
*: With navigation function
NOTE
OThe button display will vary depending on each station or content
item.
SHOUT FUNCTION
Your voice can be sent to the application server.
1.Select.

USEFUL INFORMATION
164 XWith navigation function
3.Check that weather information is displayed.
No. Function
Select to switch the timing of the displayed forecast.
Items such as the weather forecast, forecast
temperature or highest temperature (orange)/lowest
temperature (blue), and chance of precipitation are
displayed.
Select to display alert list.
Select to set the forecast region. Follow the steps in
“XWithout navigation function” from “STEP 4”.
Select to update the forecast location.
Select to update with the latest information.
Weather forecast icons
Display Information
none No Data Available
Unknown Precip
Isolated Thunderstorms
Scattered Thunderstorms
Scattered Thunderstorms (night)
Severe Thunderstorms
Thunderstorms
Rain
Light Rain
Heavy Rain
Scattered Showers
Showers