ad blue SUBARU OUTBACK 2017 6.G Multimedia System Manual

Bluetooth® SETTINGS
180
DISPLAYING THE “Bluetooth Settings (Bluetooth
Settings)” SCREEN IN A DIFFERENT WAY
XFrom the phone/message settings screen
1.Select.
2.SelectSETTINGS (SETTINGS).
3.SelectPhone (Phone).
4.SelectConnect Phone (Connect Phone).
X From the status display
1.6HOHFWVWDWXVGLVSOD\DUHDRQWKHVFUHHQ
:3
REGISTERING A Bluetooth DEVICE
Up to 5 Bluetooth devices can be registered.
Bluetooth compatible phones (HFP) and audio devices
(AVP) can be registered simultaneously.
This operation cannot be performed while driving.
1.Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2.SelectAdd (Add).
X When another Bluetooth device is connected

”To disconnect the Bluetooth device, select
Yes
(Yes).
X When 5 Bluetooth devices have already been
registered

”A registered device needs to be replaced. Select
Yes (Yes), and then select the device to be
replaced.
3.When this screen is displayed, search for the device
name displayed on this screen on the screen of your
Bluetooth device.

” For details about operating the Bluetooth device, see
the manual that comes with it.

” To cancel the registration, select
Cancel (Cancel).

SETTINGS
7
Bluetooth® SETTINGS
181
4.Register the Bluetooth device using your Bluetooth
device.

”A PIN-code is not required for SSP (Secure Simple
Pairing) compatible Bluetooth devices. Depending
on the type of Bluetooth device being connected, a
PHVVDJH FRQ

Bluetooth® SETTINGS
182
4.SelectYes <HV ZKHQ WKH FRQ

SETTINGS
7
Bluetooth® SETTINGS
183
4.&KHFN WKDW D FRQ

Bluetooth® SETTINGS
184
EDITING THE Bluetooth DEVICE
INFORMATION
The Bluetooth device’s information can be displayed on the
screen. The displayed information can be edited.
1.Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2.Select the desired device to be edited.
3.SelectDevice Info (Device Info).
4.&RQ¿UPDQGFKDQJHWKH%OXHWRRWKGHYLFHLQIRUPDWLRQ
No.
Information
The name of the Bluetooth device. Can be changed to a
GHVLUHGQDPH
:3
Select to set the Bluetooth audio device connection
PHWKRG
:3
Device address is unique to the device and cannot be
changed.
Phone number of the Bluetooth phone.

SETTINGS
7
Bluetooth® SETTINGS
185
No.Information
&RPSDWLELOLW\SUR¿OHRIWKH%OXHWRRWKGHYLFH
Select to reset all setup items.
NOTE
OIf 2 Bluetooth devices have been registered with the same
device name, the devices can be distinguished referring to the
device’s address.
O Depending on the type of phone, some information may not be
displayed.
CHANGING A DEVICE NAME
1.SelectDevice Name (Device Name).
2.Enter the name and then select OK (OK).
NOTE
O
Even if the device name is changed, the name registered in your
Bluetooth device does not change.
SETTING AUDIO DEVICE CONNECTION METHOD
1.SelectConnect Audio Device from (Connect Audio
Device from).
2.Select the desired connection method.

”
Vehicle (Vehicle): Select to connect the audio
system to the audio device.

”
Device (Device): Select to connect the audio device
to the audio system.

” Depending on the audio device, the “Vehicle
(Vehicle)” or “Device (Device)” connection method
may be best. As such, refer to the manual that comes
with the audio device.

” To reset the connection method, select
Default
(Default).

Bluetooth® SETTINGS
186
“System Settings (System Settings)”
SCREEN
7KH%OXHWRRWKVHWWLQJVFDQEHFRQ¿UPHGDQGFKDQJHG
1.Display the “Bluetooth Settings (Bluetooth Settings)”
VFUHHQ
:3
2.SelectSystem Settings (System Settings).
3.Select the desired item to be set.
No.
Information Page
Select to set Bluetooth connection on/off. 187
Displays system name. Can be changed to a
desired name. 187
PIN-code used when the Bluetooth device
was registered. Can be changed to a desired
code.187
Device address is unique to the device and
cannot be changed.
-
Select to set the phone connection status
display on/off.-
Select to set the connection status display of
the audio device on/off.-
&RPSDWLELOLW\SUR¿OHRIWKHV\VWHPGHYLFH
-
Select to reset all setup items. -

SETTINGS
7
Bluetooth® SETTINGS
187
CHANGING “Bluetooth Power (Bluetooth Power)”
1.SelectBluetooth Power (Bluetooth Power).
Q WHEN “Bluetooth Power (Bluetooth Power)” IS ON
The Bluetooth device is automatically connected when
the ignition switch is turned to the “ACC” or “ON” position.\
Q WHEN “Bluetooth Power (Bluetooth Power)” IS OFF
The Bluetooth device is disconnected, and the system will
not connect to it next time.
NOTE
O While driving, the auto connection state can be changed from off
to on, but cannot be changed from on to off.
EDITING THE Bluetooth NAME
1.SelectBluetooth Name (Bluetooth Name).
2.Enter a name and then select OK (OK).
EDITING THE PIN-CODE
1.SelectBluetooth PIN (Bluetooth PIN).
2.Enter a PIN-code and then select OK (OK).

OTHER SETTINGS
189
SETTINGS
7
No.Function
*16HOHFWWRFKDQJHWKHYHKLFOHFORFNVHWWLQJV
:3
Select to change the language.
Select to turn the beep sound on/off.
Select to change the button and screen color.
Select to change the keyboard layout.
Select to turn on/off the setting that returns the display
to the split screen automatically after 20 seconds when
a screen other than the split screen is displayed.
Select to turn the animation function on/off.
6HOHFWWRFXVWRPL]HWKHVFUHHQRIILPDJH
:3
6HOHFWWRGHOHWHSHUVRQDOGDWD
:3
No.Function
Select to set the connected device when using aha.
Select
USB (USB) when using an iPhone, and then
select
Bluetooth (Bluetooth) when using Android
devices.
Select to set the connected device when using
Pandora*2. Select USB (USB) when using an iPhone,
and then select
Bluetooth (Bluetooth) when using
Android devices.
Select to update the Gracenote® database. For details,
contact your SUBARU dealer.
Select to display the software information. Notices
related to third party software used in this product are
enlisted. (This includes instructions for obtaining such
software, where applicable.)
Select to set the back camera delay control on/off.
When set to on, the back camera image displays for
approximately 6 seconds after moving the shift lever/
select lever “R” to any position other than “R”.
The display disappears when the shift lever/select lever
is moved to “P”, or when the vehicle speed reaches
approximately 5 mph (8 km/h) or faster.
Select to set the welcome display on/off when getting
into the vehicle.
*1Select to set the low fuel - gas station search on/off.

BASIC OPERATION
202
No. OperationFunction
Point
informationSelect to open another screen
displaying information on the
selected map position (cursor). When
Bluetooth is enabled on your cellular
phone, a call can be placed if the
displayed information screen contains
phone number information.
Return to
normal
navigation
Select to return the map to the current
GPS position. Auto map rotation is
also enabled. The map operation
buttons are not displayed, and
navigation restarts.
Tilt up/down
Select to change the vertical display
angle of the map in 3D mode. Select
and hold to continue changing the
motion of the map screen.
No. Operation
Function
Selecting a
destinationSelect to select the cursor as a new
destination. The route is researched
automatically.
Additional
functionsSelect to display the additional
functions list. For example, saving
the cursor to the destination list, and
searching the area around the cursor.
Zoom in/out
Select to change the area of the map
displayed on the screen. Select and
hold to continue changing the scale of
the map screen.
NOTE
O
The map screen scale can be changed by double-touching or
SLQFKLQJWKHVFUHHQ
:3
O The map direction can be changed by rotating the screen.

:3