ESP SUBARU TRIBECA 2012 1.G Navigation Manual

46
■Using “Change Search Area” function This function designates a general geographical area where the destination or waypoint you want to set is located.
This function can be used in the methods marked with an asterisk (*) on Page 25.1
Select the desired area.The DESTINATION ENTRY menu screen will appear.
NOTE
• The SEARCH AREA screen shown above is a sample image. It may be slightly different from the actual screen image.
• The DVD-ROM disc containing map data is split into two discs, containing information regarding East and West U.S. respectively. Both
discs cover the Continental U.S. and the District of Columbia, but the POI (points of interest) are split depending on the disc, as follows:
WEST: US1 ~ US7 and southern Canada
EAST: US6 ~ US10 and southern Canada
US6, US7 and southern Canada (CAN) are included in both discs.
Please note that Alaska, Hawaii, Guam and the other Pacific islands are not covered.
Setting Route
First, choose either of the two procedures below to follow the “change” method.
• Press the button or select , select (destination entry), and then select (change).
• Press the button and select (change).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 46

56
Route preferencesUse this function to specify preferred route search conditions. The system will start recalculating the route
according to your specified conditions.
1
Specify conditions by selecting keys. Each time you select a key, it will toggle between “usage” and “non-usage” of the
corresponding roads or ferries.
2
Select (calculate).
NOTE• The (calculate) key can be selected during route guidance.
• The route calculation will not always be able to follow the specified conditions.
Route Options
Press the button or select , then select (route options), and then select
(route preferences).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 56

59
Route Options
■Modifying destination or waypoint positionsUse this procedure to modify the destination or waypoint positions. The screen will display the calculated route and
the positions of the destination or waypoints that you will be able to modify.1
Select (list).
2
Select (change location).
3
Select the key corresponding to the location that is to be modified.The map for the area around your current location will be displayed.
Press the button or select , then select (route options), and then select
(destination and
waypoints
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 59

63
Route Options
■Deleting destination or waypointsUse this procedure when you wish to delete the previously set destination or waypoint.1
Select (delete).
2
Select the key corresponding to the destination or waypoint you wish
to delete.
3
Confirmation message will be displayed. Select (yes).Select (no) to cancel the deletion.
4
Select (calculate).
Press the button or select , then select (route options), and then select
(destination and
waypoints
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 63

72
Arrival Time:
Time of arrival at the destination or a waypoint can be displayed in two different
ways: estimated arrival time or remaining driving time. Select for the estimated
arrival time display or for the remaining time display.
Color scheme:
Select your preferred screen color from four options to .
Map Mode:
The map display mode can be set to any of the automatic, daytime, and nighttime
modes.
(automatic):The brightness of the display will automatically change to daytime
brightness and nighttime brightness when the headlights are
turned off and on, respectively.
(daytime):The brightness of the display is fixed at the daytime setting
regardless of whether the headlights are on or off.
(nighttime):The brightness of the display is fixed at the nighttime setting
regardless of whether the headlights are on or off.
Navigation Setup
<Estimated arrival time>
<Required remaining time>
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 72

92
3
Select the memory point to be modified.You can change the sequence in which memory points are listed by selecting
(distance), (icon), (name), or (date).
4
Select the category key corresponding to the memory point to be
modified.
(icon):Selecting this key allows you to choose a display icon. and
of the CHANGE ICON screen contain standard icons, whereas
the “With Sound” (with sound) page contains icons that are
accompanied by response sounds. Select (with sound) to
listen to these sounds.
NOTE
The “With direction” ( / ) keys in the “With Sound” page are used to activate response
sounds only when you come near the memory point from the specified direction. Select or
and set the direction using or .
Stored Locations
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 92

99
Stored Locations
■Reviewing and modifying avoid areasUsing this function, you can review the stored avoid areas in the form of a list and modify them if necessary.1
Select (list).
2
Select the avoid area to be modified.
3
Select the key corresponding to the item to be modified.For details regarding the function of each key, refer to “Reviewing and modifying
memory points” on Page 91.
NOTE
The methods for deleting individual and all avoid areas are the same as those described on Page 94 and 95 for memory points.Press the button or select , then select (stored locations), and then select
(avoid area
).
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 99

108
Displaying POIs on a mapUsing this function, you can display POIs on the current map screen.
1
Touch the current map screen.
2
Select (points of interest).
3
Select desired POIs (up to five) using the displayed category keys.For selecting POIs of categories other than the six categories on the screen, select
(list categories) and select any POIs from the newly displayed categories.
(all local POIs):Use this key to search for all local points of interest (see
below).
Once you have made your selection of POIs, corresponding markers will appear on
the current map screen.
To delete the markers for these POIs, see Page 112.
NOTE
Displayed information about each POI facility might not include recent changes. It is recommended that you check the location or
business days/hours before departure.
Other Functions
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 108

110
4
Select the POI you want to find from the list of categories.
:Use this key to display up to five previous POIs.
:Use this key to display the previous POI.
:Use this key to display the next POI.
:Use this key to display up to five of the next POIs.
:Use this key to search through the list by distance.
:Use this key to search through the list by icon type.
:Use this key to search through the list by name (alphabetical search).
Once you have made your selection of POIs, corresponding markers will appear on
the map.
Other Functions
TribecaNavi_US_B3112BE.qxd 06.12.12 11:08 AM Page 110