display SUZUKI NEXA 2015 1.G User Guide

Page 67 of 288

Downloaded from www.Manualslib.com manuals search engine 
%()25('5,9,1*
06(
,QIRUPDWLRQ'LVSOD\The information display is shown when the
ignition switch is in the “ON” position or the
ignition mode is ON.
64MS183
(1) Information display
64MS184
(2) Indicator selector knob
(3) Trip meter selector knob
The information display shows the follow-
ing information.'LVSOD\ $
Clock
'LVSOD\ %
Thermometer
'LVSOD\ &
Warning and indicator messages /
Fuel consumption / Driving range /
Average speed
'LVSOD\ '
Trip meter
'LVSOD\ (
Odometer
64MS181
When the ignition switch is turned to the
“ON” position or the engine switch is
pressed to change the ignition mode to
ON, the message shown in the above illus-
tration will appear on the display for sev-
eral seconds.
Some warning and indicator messages
may appear on the display when the igni-
tion switch is in the “ACC” or “LOCK” posi-
tion, or the ignition mode is ACC or LOCK
(OFF).
&ORFNThe display (A) shows the time.
To set the clock, follow the “Setting mode”
instructions in this section.7KHUPRPHWHUThe display (B) shows the thermometer.
The thermometer indicates the outside
temperature.
61MM0A160
If the outside temperature nears freezing,
the message shown in the above illustra-
tion will appear on the display.
NOTE:
The outside temperature indication is not
the actual outside temperature when driv-
ing at low speed, or when stopped.
(1)(B)
(C) (A)
(D)
(E)
(3)
(2)
(;$03/(

Page 68 of 288

Downloaded from www.Manualslib.com manuals search engine %()25('5,9,1*
06(
)XHO&RQVXPSWLRQ'ULYLQJ5DQJH$YHUDJH6SHHGWhen there are no warning or indicator messages on the display (C), you can select one
of the following indications to appear on the display: instantaneous fuel consumption,
average fuel consumption, driving range, average speed or no indication.
64MS058
(a) Instantaneous fuel consumption
(b) Average fuel consumption
(c) Driving range
(d) Average speed
(e) No indication
To switch the display indication, push the indicator selector knob (2) quickly.
(a) (b) (c)
(d) (e)
(;$03/(
NOTE:
The value of fuel consumption, driving
range and average speed shown in the
display are affected by conditions such as
the following;
• road condition
• surrounding traffic condition
• driving condition
• vehicle condition
• a malfunction which causes the malfunc-
tion indicator light to come on or blink

Page 69 of 288

Downloaded from www.Manualslib.com manuals search engine 
%()25('5,9,1*
06(
,QVWDQWDQHRXVIXHOFRQVXPSWLRQ
The display shows instantaneous fuel con-
sumption with a bar graph only when the
vehicle is moving.
NOTE:
• The display does not show the bar graph
unless the vehicle is moving.
• Depending on the vehicle’s specification,
the fuel consumption units of initial set-
ting are indicated as L/100km, km/L or
MPG.
• For “L/100km” or “km/L” setting, the indi-
cated maximum value of instantaneous
fuel consumption is 30. No more than 30
will be indicated on the display even if
the actual instantaneous fuel consump-
tion is higher.
• For “MPG” setting, the indicated maxi-
mum value of instantaneous fuel con-
sumption is 80. No more than 80 will be
indicated on the display even if the
actual instantaneous fuel consumption is
higher.
• The indication on the display may be
delayed if fuel consumption is greatly
affected by driving conditions.
• The display shows estimated values.
Indications may not be the same as
actual values.
$YHUDJHIXHOFRQVXPSWLRQ
If you selected average fuel consumption
the last time you drove the vehicle, the dis-
play shows the last value of average fuel
consumption from previous driving when
the ignition switch is turned to the “ON”position or the engine switch is pressed to
change the ignition mode to “ON”. Unless
you reset the value of average fuel con-
sumption, the display indicates the value of
average fuel consumption which includes
average fuel consumption during previous
driving.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the value of average
fuel consumption will be shown after driv-
ing for a period of time.
You can select when the value of average
fuel consumption is reset from among the
following three methods;
• Reset after refuel: the value of average
fuel consumption will be reset automati-
cally by refueling.
• Reset with trip A: the value of average
fuel consumption will be reset automati-
cally by resetting trip meter A.
• Reset manually: the value of average
fuel consumption will be reset by push-
ing and holding the indicator selector
knob (2) when the display indicates the
average fuel consumption.
To change when the value of average fuel
consumption is reset, refer to “Setting
Mode” later in this section.
NOTE:
If you add only a small amount of fuel
when you select “Reset after refuel”, the
average fuel consumption value may not
be reset.'ULYLQJUDQJH
If you selected driving range the last time
you drove the vehicle, the display indicates
“---” for a few seconds and then indicates
the current driving range when the ignition
switch is turned to the “ON” position or the
engine switch is pressed to change the
ignition mode to ON.
The driving range shown in the display is
the approximate distance you can drive
until the fuel gauge indicates “E”, based on
current driving conditions.
When the low fuel warning light comes on,
the display “---” will appear.
If the low fuel warning light comes on, fill
the fuel tank immediately.
As the driving range after refueling is cal-
culated based on the most recent driving
condition, the value is different each time
you refuel.
NOTE:
• If you refuel when the ignition switch is in
the “ON” position or the ignition mode is
“ON”, the driving range may not indicate
the correct value.
• When you reconnect the negative (–)
terminal to the battery, the value of driv-
ing range will be shown after driving for a
period of time.

Page 70 of 288

Downloaded from www.Manualslib.com manuals search engine %()25('5,9,1*
06(
$YHUDJH6SHHG
If you selected average speed the last time
you drove the vehicle, the display indicates
the last value of average speed from
previous driving when the ignition switch is
turned to the “ON” position or the engine
switch is pressed to change the ignition
mode to “ON”. Unless you reset the value
of average speed, the display indicates the
value of average speed which includes
average speed during previous driving.
To reset the value of average speed, push
and hold the indicator selector knob (2) for
about 2 seconds when the display indicates
an average speed. The display shows “---”
and then indicates a new average speed
after driving for a short time.
NOTE:
When you reconnect the negative (–) ter-
minal to the battery, the value of average
speed will be shown after driving for a
period of time.7ULS0HWHUThe display (D) shows the trip meter.
The trip meter can be used to measure the
distance traveled on short trips or between
fuel stops.
You can use the trip meter A or trip meter B
independently.
To reset the trip meter to zero, push and
hold the trip meter selector knob (3) for
about 2 seconds when the display shows
the trip meter.
2GRPHWHUThe display (E) shows the odometer.
The odometer records the total distance
the vehicle has been driven.6HWWLQJ0RGHWhen the ignition switch is in the “ON”
position or the ignition mode is ON and the
vehicle is stationary, you can enter the set-
ting mode of the information display by
pushing and holding the indicator selector
knob (2) for more than 3 seconds.
• To select the setting that you want to
change, turn the indicator selector knob
(2) left or right.
• To change the setting, push the indicator
selector knob (2).
• To exit the setting mode, select “Back”
and push the indicator selector knob (2).
61MM0A161
NOTE:
The currently selected setting item is indi-
cated enclosed by a frame.
NOTE:
• If you push and hold the indicator selec-
tor knob (2) to enter the setting mode
when the display (D) shows average fuel
consumption or average speed, the
value will be reset simultaneously. If you
do not want to reset the value, push the
indicator selector knob quickly to switch
the indication of the display.
• If you turn the ignition switch, press the
engine switch or start to move the vehi-
cle when the display is in the setting
mode, the setting mode will be canceled
automatically.
NOTICE
.HHS WUDFN RI \RXU RGRPHWHU UHDGLQJ
DQG FKHFN WKH PDLQWHQDQFH VFKHG
XOH UHJXODUO\ IRU UHTXLUHG VHUYLFHV
,QFUHDVHG ZHDU RU GDPDJH WR FHUWDLQ
SDUWV FDQ UHVXOW IURP IDLOXUH WR SHU
IRUP UHTXLUHG VHUYLFHV DW WKH SURSHU
PLOHDJHLQWHUYDOV
(;$03/(

Page 71 of 288

Downloaded from www.Manualslib.com manuals search engine 
%()25('5,9,1*
06(
'LVWDQFHXQLW
2GRWULSPHWHUGLVWDQFHXQLWVVHWWLQJ
You can change the units odo/trip meter
distance is displayed in.
NOTE:
When you change the units odo/trip meter
distance is displayed in, the trip meter will
be reset automatically.
)XHOHFRQRP\
)XHOFRQVXPSWLRQXQLWVVHWWLQJ
You can change the units that fuel con-
sumption is displayed in.
/DQJXDJH
You can change the language of the infor-
mation display.
)XHO UHVHW $YHUDJH IXHO FRQVXPSWLRQ
UHVHWVHWWLQJ
You can change when the value of aver-
age fuel consumption is reset.
7HPSHUDWXUH
7HPSHUDWXUHXQLWVVHWWLQJ
You can change the units that temperature
is displayed in.
NOTE:
When you change the units that tempera-
ture is displayed in, the automatic heating
and air conditioning system (if equipped)
temperature display units will be changed
automatically.6HW6HQVRUV
3DUNLQJVHQVRUV LIHTXLSSHG VHWWLQJ
The parking sensor can be switched
between the normal mode and trailer
mode.
&ORFNVHWWLQJ
• To change the hour indication, turn the
indicator selector knob (2) left or right
repeatedly when the hour indication
appears as reversed color. To change
the hour indication quickly, turn and hold
the indicator selector knob (2). To set the
hour indication, push the indicator selec-
tor knob (2) and the minute indication
appears as reversed color.
• To change the minute indication, turn the
indicator selector knob (2) left or right
repeatedly when the minute indication
appears as reversed color. To change
the minute indication quickly, turn and
hold the indicator selector knob (2). To
set the minute indication, push the indi-
cator selector knob (2).
You can also switch the time indication
between 12-hour and 24-hour format.'RRU/RFN 'RRUORFNVHWWLQJ

Page 74 of 288

Downloaded from www.Manualslib.com manuals search engine %()25('5,9,1*
06(
(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.:DUQLQJDQG,QGLFDWRU
0HVVDJH0DVWHU:DUQLQJ
,QGLFDWRU/LJKW6RXQG &DXVHDQG5HPHG\
Keyless Push Start System
61MM0A163
Off Off This message is displayed when the ACC
position is selected as the power supply
position. (#1)
Keyless Push Start System
61MM0A164
Off Off The clutch pedal is depressed. Press the
engine switch to start the engine.

Page 77 of 288

Downloaded from www.Manualslib.com manuals search engine 
%()25('5,9,1*
06(
(#1) This message will disappear for a while even if the problem that caused the message to appear is not corrected.:DUQLQJDQG,QGLFDWRU
0HVVDJH0DVWHU:DUQLQJ
,QGLFDWRU/LJKW6RXQG &DXVHDQG5HPHG\
61MM0A172
Blinks Continuous beep (from inte-
rior buzzer)The headlights and/or the position lights are
left on. Turn them off.
Keyless Push Start System
61MM0A173
Off Off This message is displayed when the ON
position is selected as the power supply
position. (#1)

Page 79 of 288

Downloaded from www.Manualslib.com manuals search engine 
%()25('5,9,1*
06(
NOTE:
If your vehicle is equipped with a parking sensor system, the information display also indicates warning and indicator messages related
to the system. For information on these messages, refer to “Parking Sensors” in the “OPERATING YOUR VEHICLE” section.:DUQLQJDQG,QGLFDWRU
0HVVDJH0DVWHU:DUQLQJ
,QGLFDWRU/LJKW6RXQG &DXVHDQG5HPHG\
61MM0A226
Blinks Beep (one time from interior
buzzer) There is a possibility to have water in the
fuel filter.
Have your vehicle inspected by an autho-
rized 0DUXWL6X]XNL ZRUNVKRS
61MM0A180
Blinks Beep (one time from interior
buzzer) If this message is displayed, have your
vehicle inspected by an authorized 0DUXWL
6X]XNL ZRUNVKRS.

Page 80 of 288

Downloaded from www.Manualslib.com manuals search engine %()25('5,9,1*
06(
:DUQLQJDQG,QGLFDWRU/LJKWVNOTE:
If warning and indicator lights blink or
come on, the corresponding messages
may be shown on the information display.
%UDNH6\VWHP:DUQLQJ/LJKW
65D477
Three different types of operations exist
depending on the vehicle’s specification.
1) The light comes on briefly when the
ignition switch is turned to the “ON”
position or the engine switch is pressed
to change the ignition mode to “ON”.
2) The light comes on when the parking
brake is engaged with the ignition
switch in the “ON” position or the igni-
tion mode “ON”.
3) The light comes on when under either
or both of above two conditions.
The light also comes on when the fluid in
the brake fluid reservoir falls below the
specified level.
The light should go out after starting the
engine and fully releasing the parking
brake, if the fluid level in the brake fluid
reservoir is adequate.
If your vehicle is equipped with the ABS,
the brake system warning light also comes
on together with the ABS warning light
when the rear brake force control function(proportioning valve function) of the ABS
system fails.
If the brake system warning light comes on
while you are driving the vehicle, it may
mean that there is something wrong with
the vehicle’s brake system. If this happens,
you should:
1) Pull off the road and stop carefully.
2) Test the brakes by carefully starting and
stopping on the shoulder of the road.
3)If you determine that it is safe, drive
cautiously at low speed to the nearest
DXWKRULVHG 0DUXWL 6X]XNL ZRUNVKRSfor
repairs,or
4) Have the vehicle towed to the nearest
DXWKRULVHG 0DUXWL 6X]XNL ZRUNVKRSfor
repairs.
:$ 5 1 , 1 *
5HPHPEHU WKDW VWRSSLQJ GLVWDQFH
PD\EHORQJHU\RXPD\KDYHWRSXVK
KDUGHU RQ WKH SHGDO DQG WKH SHGDO
PD\JRGRZQIDUWKHUWKDQQRUPDO

Page 87 of 288

Downloaded from www.Manualslib.com manuals search engine 
%()25('5,9,1*
06(
)XHO)LOWHU:DUQLQJ/LJKW
60A541
This light comes on for several seconds
when the ignition switch is turned to the
“ON” position or the engine switch is
pressed to change the ignition mode to ON
so you can check that light is working.
If the light comes on when driving, there is a
possibility to have water in the fuel filter.
Drain water as soon as possible.Have your
vehicle inspected by an DXWKRULVHG 0DUXWL
6X]XNL ZRUNVKRS. For details of drain-ing
water, refer to “Fuel Filter” in the
³,163(&7,21$1'0$,17(1$1&(´ sec-
tion.
0DVWHU:DUQLQJ,QGLFDWRU/LJKW
78K049
When the information display shows warn-
ing and indicator messages, this indicator
light may also blink.
For details, refer to “Information Display” in
this section.
/LJKWLQJ&RQWURO/HYHU
65D611
:$ 5 1 , 1 *
7R DYRLG SRVVLEOH LQMXU\ GR QRW RSHU
DWH FRQWUROV E\ UHDFKLQJ WKURXJK WKH
VWHHULQJZKHHO

Page:   < prev 1-10 11-20 21-30 31-40 41-50 51-60 ... 70 next >