wipers SUZUKI NEXA 2015 1.G Owners Manual

Downloaded from www.Manualslib.com manuals search engine %()25('5,9,1*
06(
To turn the lights on or off, twist the knob
on the end of the lever. There are four
positions:
2))
All lights are off.
$872
This function works when it on mode has
been changed to ON by pressing the
engine switch. The headlights and position
lights are turned on and off automatically
according to the amount of outside light
detected by a sensor. They go out auto-
matically when you change the ignition
mode to “ACC” or “LOCK” (OFF) by press-
ing the engine switch.
The light sensor (5) for sensing the amount
of outside light is installed on the upper
part of the windshield. It also serves as the
rain sensor for the rain-sensing wipers.NOTE:
• Avoid covering the light sensor area of
the windshield with a sticker. The sticker
may impair the performance of the sen-
sor and make the system unable to con-
trol operation of the lights correctly.
• If you changed the ignition mode to ON
by pressing the engine switch and the
“AUTO” position remains selected, the
headlights and position lights come on
automatically as the outside gets dark
even with the engine not running. Leav-
ing the lights lit for a long time may lead
to a completely discharged battery.

Front position lights, tail lights, license
plate light and instrument lights are on, but
headlights are off.

Front position lights, tail lights, license
plate light, instrument lights and headlights
are on.
64MS061
With the headlights on, push the lever for-
ward to switch to the high beams (main
beams) or pull the lever toward you to
switch to the low beams. When the high
beams (main beams) are on, a light on the
instrument panel will come on. To momen-
tarily activate the high beams (main
beams) as a passing signal, pull the lever
slightly toward you and release it when you
have completed the signal.
$XWRRQKHDGOLJKWV\VWHP
64MS062
The Auto-on headlight system automati-
cally turns on all lights that are operated by
the lighting control lever on the steering
column, when the following three condi-
tions are all met.
Conditions for Auto-on headlight system
operation:
1) It is dark around the light sensor (5).
2) The lighting control lever is in the
“AUTO” position.
3) You press the engine switch to change
the ignition mode to ON.
&$87,21
,I WKH OLJKW VHQVRU DUHD RI WKH ZLQG
VKLHOG LV FRYHUHG ZLWK PXG LFH RU
RWKHU VLPLODU VXEVWDQFHV WKH KHDG
OLJKWV DQG SRVLWLRQ OLJKWV PD\ EH
WXUQHG RQ HYHQ ZKHQ LW LV VWLOO OLJKW
RXWVLGH %HIRUH UHPRYLQJ VXFK VXE
VWDQFHV IURP WKH ZLQGVKLHOG DOZD\V
VHW WKH ZLSHU FRQWURO OHYHU WR WKH

Downloaded from www.Manualslib.com manuals search engine %()25('5,9,1*
06(
:LSHUDQG:DVKHU2SHUDWLRQWhen the ignition switch is in the “ON” posi-
tion or the ignition mode is ON, you can use
the wiper/washer lever or switch (if
equipped).:LQGVKLHOG:LSHUV
64MS063
To turn the windshield wipers on, move the
lever down to one of the three operating
positions. In the “INT” position, the wipers
operate intermittently. The “INT” position is
very convenient for driving in mist or light
rain. In the “LO” position, the wipers operate
at a steady low speed. In the “HI” position,
the wipers operate at a steady high speed.
To turn off the wipers, move the lever back
to the “OFF” position.
Move the lever up and hold it to the “MIST”
position, the windshield wipers will turn on
continuously at low speed.
64MS064
If the lever is equipped with the “INT TIME”
control, turn the control forward or rear-
ward to adjust the intermittent wiper opera-
tion to the desired interval.
:LQGVKLHOG:LSHUVZLWK5DLQ6HQV
LQJ)XQFWLRQLIHTXLSSHG
64MS065
Press the engine switch to change the igni-
tion mode to ON. To turn the rain-sensing
wipers on, move the lever down to one of
the three operating positions. In the “AUTO”
position (if provided), the wipers automati-
cally operate when the wiper system senses
rain or snow. In the “LO” position, the wipers
operate at a steady low speed. In the “HI”
position, the wipers operate at a steady high
speed. To turn off the wipers, move the lever
back to the “OFF” position.Move the lever up and hold it to the “MIST”
position; the wipers will operate continu-
ously at low speed for as long as you hold
the lever in the “MIST” position.
(;$03/(
(;$03/(
MIST
HI OFF
LO AUTO
(;$03/(

Downloaded from www.Manualslib.com manuals search engine 
%()25('5,9,1*
06(
64MS066
If the control lever has on “AUTO” position,
you can change the system’s sensitivity to
rain/snow by turning the knob of the control
lever forward for increased sensitivity or
rearward for decreased sensitivity.
61M0219
(1) Rain sensorNOTE:
• Under the following conditions, the rain
sensor may not be able to sense rain or
snow correctly, and thus the rain-sensing
wiper function may not work or may work
incorrectly. (Use a position other than
“AUTO” under these conditions.)
– Rain or snow does not hit the rain sen-
sor area of the windshield, or the snow
is not of a type that is able to be
detected by the sensor.
– The rain sensor area is covered with
mud, ice or other similar substance.
You should remove any foreign sub-
stance.– There were already raindrops on the
windshield before starting rain-sensing
wiper operation. You should remove
the raindrops by operating the wipers
under manual control.
– The rain sensor is hotter than 80°C
(176°F) in the sun or lower than –10°C
(14°F) in freezing weather. (The wip-
ers do not operate under this condi-
tion.)
– The windshield is coated with a water-
repellent substance, which causes
raindrops to run down quickly. This will
give a clearer view and the wipers
may seem to operate too frequently. In
this case, decrease the system’s sen-
sitivity.
– The sensor area is covered with a
sticker.
– The wiper blades are damaged. You
should replace them.
•
The following conditions may indicate
problems with the rain-sensing wiper
system. If your system exhibits any of
the following conditions, have it
inspected by an DXWKRULVHG 0DUXWL
6X]XNLZRUNVKRS.
– Rainfall/snowfall rate varies but the
wiping interval remains constant.
– Rain/snow is falling but the wipers do
not operate.(;$03/(
(1)
&$87,21

Downloaded from www.Manualslib.com manuals search engine %()25('5,9,1*
06(
5HSURJUDPPLQJWKHUDLQVHQVLQJZLSHU
IXQFWLRQThe “AUTO” position operation of the rain-
sensing wiper function can be customized

to your preference by reprogramming its

setting as follows. Please contact an DXWKRULVHG 0DUXWL 6X]XNL ZRUNVKRS
for

this customization.)XOODXWRPDWLFZLSLQJIDFWRU\VHWWLQJ
The system automatically selects the most
appropriate of the following wiping modes:
no wiping, intermittent wiping, low-speed
wiping, and high-speed wiping.
6HPLDXWRPDWLFZLSLQJ
The system automatically selects the most
appropriate of the following wiping modes:
intermittent wiping, low-speed wiping, or
high-speed wiping. (The wipers do not stop
automatically.)
,QWHUPLWWHQWZLSLQJ
The wipers operate only in the intermittent
wiping mode. The wiping interval can be
changed with the knob on the control lever.
:LQGVKLHOG:DVKHU
64MS067
To spray windshield washer fluid, pull the
lever toward you. The windshield wipers
will automatically turn on at low speed if
they are not already on and the “INT” posi-
tion is equipped.
:$ 5 1 , 1 *